We manufacture Non Asbestos Gaskets from Compressed Non Asbestos Jointing Sheets (CNAF also known as NACF ).
These Non Asbestos Gasket Sheets are made with Glass and Aramid fibres mostly with NBR rubber binder.
The range of Asbestos Free Gasket sheets meet the requirements of BS 7531 and are sourced from Different Domestic and International manufacturers.
We manufacture all types of Standard Flange gaskets Raised Face / Full Face and any Non Standard Custom made gaskets as per your Drawings / samples / sketch.

Thickness Availability :

• 0.4 / 0.5mm
• 0.8 mm
• 1.0 mm
• 1.5 / 1.6 mm
• 2.0 mm
• 3.0 / 3.2 mm
• 5.0 mm

The Precision Gaskets manufactured by us are highly demanded by the clients, owing to their quality, performance, and durability. These Precision Gaskets are largely applicable in various industrial processes. We offer services to cut Precision Gaskets as per the client's requirement, sizes, drawings, standard as per ASA, BS, DIN, etc. Our Precision Gaskets are available in the market at competitive prices.

 

Details  :

• Precision made
• Non-corrosive
• Temperature resistant
• Durable

 

Available In :

• CAF(compressed asbestos fiber)
• Cork
• Graphoil
• Oil paper
• Vegetable fiber
• Felt
• PTFE rubber
• Non asbestos sheet

Camprofile Gaskets are used for difficult sealing conditions when performance is critical and sealing stresses are low. Non metal  Sealing Elements like PTFE and Flexible Graphite ensure that flanges are not damaged even at extreme loads and provide excellent Sealing properties and enhance the reliability of a solid metal to metal seal.

We Manufacture Expanded PTFE Gaskets and also joint Sealants. The high-grade Expanded PTFE Sheet Gaskets is made by special process that produces a uniform and highly fibrillated microstructure.

Details:

• Can seal uneven damaged flanges
• Resist all chemicals execpt melted alkali metal
• Fluorine at liquid and gas state
• Excellent flexiblility
• Simple to cut and install

Specifications :

• Compressibility : 66% (ASTM-F36) · Recovery : 16% (ASTM -F36)
• Material : 100% Pure PTFE, Produced in an expanded microporous structure
• Temperature : 240ºc to + 270ºc ( for short burst +310ºc)
• pH range : 0-14 pH except molten alkali metals and elemental fluorin
• Pressure : 3000 PSI (210 BAR)

Graphite (Graphoil® ) moulded rings are made from pure graphite containing no binder or Fillers. Flexible Graphite Gaskets can be made to any size, shape, profile as per Drawing from Sheets.

These May be from :Plain Flexible Graphite- Sheet / Foil insert Tanged Sheet insert- Sheets / Gaskets with Metal Insertion of SS 304 / SS 316 / GI- Wire Mesh in Stainless Steel / Carbon Steel.
The Flexible Graphite Gaskets are specially designed to provide the desired compression with high percentage recovery and low creep relaxation. Seels the minutest imperfections - Effective and excellent Sealing.

Specifications :

• High Temperature Resistance : -200 deg C to 600 deg C (+3000c in non-oxidizing areas)
• High Chemical Resistance : PH 0-14
• High Pressure Resistance : Upto 1000 PSI
• High Cross Section Density : 1.6 gm/mm (For Moulded Rings) depending on design Upto 12000PSI fro metallic Gaskets.

We manufacture Rubber Gaskets and 'O' Rings from high-grade raw materials in order to give a durable performance. Our Moulded Gaskets and Extruded Rubber Gaskets in different profiles are widely used in various industries and applications. The Rubber Gaskets are available in varied hardness and other physical parameters as per the client's requirements.These may sometimes be reinforced with Fabric insertion of Cotton/ Nylon/Metallic wire Mesh/ Solid Steel Insert.

Components :

• 'O' Rings- Washers- Gaskets for Manhole/Flanges in Full/ Falt Face or Raised Face
• Molded Components -Extruded Profiles/ sections -Self Adheshive Strip Panel Gasket
• Expansion Bellows- Hose Pipes

Available In :

• Viton® / FluroPolymer- Silicon® / HT Silicon- Food Grade(White/Translucent)
• Buna-N / Nitrile® / NBR- Neoprene® - EPDM – Butyl – Hypalon-Natural - Food Grade
• Natural / Neoprene® /EPDM / Silicon®

Our range of PTFE (Tefion®) Gaskets includes PTFE Encelope Gaskets and Expanded PTFE Sheet  Gaskets/Joint sealants. Machined componets like PTFE"0" rings, 'T' Bush, seats, seals or as per any special profile/ shape to your drawings. Solid PTFE gaskets/ Machined components are availble in Filled grade as well like Bronze / Carbon / Glass filled PTFE.
PTFE Envelope Gaskets manufactured by us are mainly in two types. Milled type (fused End) and Slit type (Machined). These Gaskets can have inserts of CAF, Rubber, PVC, Corrugated steel sandwiched between CAF/ Non Asbestors rings.

Milled Type Fused End : It is made to fit insert and presents a flat face to the flange. Fused End enveopes are being manufactured from Diameters of 400mm to any size with a maximum wall thickness of upto 10mm.

Slit Type : These Machined PTFE envelope variant are more suited for smaller diameters and larger quantities. It is perfectly adequate for varied applications.

We manufacture Ring Joint Gaskets conforming to R series in Octagonal / Oval shape, Bx and Rx series of API std 6A and ASME B 16.20. They are used in the production and refining process pipelines of oil and Gas Industries.

Made from solid metal types like :

• Soft Iron/LCS - Low Carbon Steel – Electroplated as per your specs zinc electroplated (By Default); Yellow Pacification; Cadamium Plated and Hot Dip Galvainsed.
• Stainless Steel AISI 304/316/321
• Income and other Alloy grades.

Our Spiral Wound Metallic Gaskets are skillfully Manufactured by spirally winding a preformed metal strip and filler on the outer periphery of metal winding mandrels. Its winding mandrel outsite diameter forms the inner diameter of the gasket and the hoop strip continually wounds until the required outer diameter is atained.

We offer Spiral Wound Metallic Gaskets in standards as per ASME B 16.20 Suitable for flanges of ANSI B 16.5, MSSP 44 Flanges for SORF, Tongue and Groove.

We Manufacture gaskets with Inner and Outer Ring with Partition Ribs for Tube Vessels, heat exchanges. These can be customized with standard and non-standard rhickness and sizes upto 2000 mm Outer Diameter as per the client Requirements.

Why Our Spiral Wound Metallic Gaskets?

• Adequate Flexibility. Can with stand high pressure. Longer working life

• Maintains a seal under variable and uneven loading

Winding Material (HOOP) Available In :

• Stainless Steel AISI 304/316/321.

• Monel

• Titanium

• Duplex

• Inconel

• Hastelloy

Filler Material Available In :

• CAF

• Non Asbestos Jointing

• PTFE

• Flexible Graphite

• Ceramic

The top-grade ptfe envelope gaskets provided by us are largely used in various industries in different processes and purposes. We offer these ptfe envelope gaskets in two types namely milled type and slit type. These gaskets can have inserts of caf, rubbera, corrugated steel sandwiched between caf rings, pvc. the clients can avail the ptfe envelope gaskets manufactured by us in varied specifications, shapes, and sizes as per their requirements.

Metal Jacketed Gaskets find their application in  HIGH PRESSURE and HIGH TEMPERATURE conditions. Its structure is easily compressible with tightening loads lower than those required for solid metallic gaskets.

Applications :

• Sealing of heat exchangers
• Valve cover
• Autoclaves
• manhole

Availability :

• Single Jacketed
• Double Jacketed
• Corrugated Jacketed

Sheet Metal Options :

• SoftIron
• AISI 304/316/321
• Copper
• Brass

FILLER Available In :

• Asbestos / Non Asbestos
• CAF
• PTFE
• FLEXIBLE GRAPHITE
• CERAMIC

With a well-organized set up, we serve our buyers from Mumbai(India) to every nook and corner. Since inception, we are serving divisive demands of the buyers by making available plentiful array of industrial gasket in the domestic market.

We Manufacture Expanded PTFE Gaskets and also Joint Sealants. The high-grade Expanded PTFE Sheet Gaskets is made by special process that produces a uniform and highly fibrillated microstructure. Attributes Can seal uneven damaged flanges Resist all chemicals except melted alkali metal, fluorine at liquid and gas states Excellent flexibility Simple to cut and install Specifications Compressibilty : 66% (ASTM-F36) Recovery : 16% (ASTM - F36) Material : 100% Pure PTFE, produced in an expanded microporous structure Temperature : -240 c to + 270 C (for short bursts + 310.C) pH range : 0 - 14 pH except molten alkali metals and elemental fluorin Pressure : 3000 PSI (210 BAR)

Our range of PTFE (Teflon) Gaskets includes PTFE Envelope Gaskets and Expanded PTFE Sheet Gaskets / Joint Sealants. Machined components like PTFE 'O' rings , 'T' Bush , seats , seals or as per any special profile / shape to your drawings. Solid PTFE gaskets / Machined components are available in Filled grade as well like Bronze / Carbon / Glass filled PTFE. PTFE Envelope Gaskets manufactured by us are mainly in two types - Milled type (fused End) and Slit type (Machined). These Gaskets can have Inserts of CAF, Rubber, PVC, Corrugated steel sandwiched between CAF / Non Asbestos rings. Milled Type - Fused EndIt is made to fit the insert and presents a flat face to the flange Fused End envelopes are being manufactured from Diameters of 400mm to any size with a maximum wall thickness of upto 100mm Slit TypeThese Machined PTFE envelope variant are more suited for smaller diameters and larger quantities. It is perfectly adequate for varied applications.

We manufacture Non Asbestos Gaskets from Compressed Non Asbestos Jointing Sheets (CNAF also known as NACF ).
These Non Asbestos Gasket Sheets are made with Glass and Aramid fibres mostly with NBR rubber binder.
The range of Asbestos Free Gasket sheets meet the requirements of BS 7531 and are sourced from Different Domestic and International manufacturers.
We manufacture all types of Standard Flange gaskets Raised Face / Full Face and any Non Standard Custom made gaskets as per your Drawings / samples / sketch.

Thickness Availability :

• 0.4 / 0.5mm
• 0.8 mm
• 1.0 mm
• 1.5 / 1.6 mm
• 2.0 mm
• 3.0 / 3.2 mm
• 5.0 mm

The Precision Gaskets manufactured by us are highly demanded by the clients, owing to their quality, performance, and durability. These Precision Gaskets are largely applicable in various industrial processes. We offer services to cut Precision Gaskets as per the client's requirement, sizes, drawings, standard as per ASA, BS, DIN, etc. Our Precision Gaskets are available in the market at competitive prices.

 

Details  :

• Precision made
• Non-corrosive
• Temperature resistant
• Durable

 

Available In :

• CAF(compressed asbestos fiber)
• Cork
• Graphoil
• Oil paper
• Vegetable fiber
• Felt
• PTFE rubber
• Non asbestos sheet

Camprofile Gaskets are used for difficult sealing conditions when performance is critical and sealing stresses are low. Non metal  Sealing Elements like PTFE and Flexible Graphite ensure that flanges are not damaged even at extreme loads and provide excellent Sealing properties and enhance the reliability of a solid metal to metal seal.

We Manufacture Expanded PTFE Gaskets and also joint Sealants. The high-grade Expanded PTFE Sheet Gaskets is made by special process that produces a uniform and highly fibrillated microstructure.

Details:

• Can seal uneven damaged flanges
• Resist all chemicals execpt melted alkali metal
• Fluorine at liquid and gas state
• Excellent flexiblility
• Simple to cut and install

Specifications :

• Compressibility : 66% (ASTM-F36) · Recovery : 16% (ASTM -F36)
• Material : 100% Pure PTFE, Produced in an expanded microporous structure
• Temperature : 240ºc to + 270ºc ( for short burst +310ºc)
• pH range : 0-14 pH except molten alkali metals and elemental fluorin
• Pressure : 3000 PSI (210 BAR)

Graphite (Graphoil® ) moulded rings are made from pure graphite containing no binder or Fillers. Flexible Graphite Gaskets can be made to any size, shape, profile as per Drawing from Sheets.

These May be from :Plain Flexible Graphite- Sheet / Foil insert Tanged Sheet insert- Sheets / Gaskets with Metal Insertion of SS 304 / SS 316 / GI- Wire Mesh in Stainless Steel / Carbon Steel.
The Flexible Graphite Gaskets are specially designed to provide the desired compression with high percentage recovery and low creep relaxation. Seels the minutest imperfections - Effective and excellent Sealing.

Specifications :

• High Temperature Resistance : -200 deg C to 600 deg C (+3000c in non-oxidizing areas)
• High Chemical Resistance : PH 0-14
• High Pressure Resistance : Upto 1000 PSI
• High Cross Section Density : 1.6 gm/mm (For Moulded Rings) depending on design Upto 12000PSI fro metallic Gaskets.

We manufacture Rubber Gaskets and 'O' Rings from high-grade raw materials in order to give a durable performance. Our Moulded Gaskets and Extruded Rubber Gaskets in different profiles are widely used in various industries and applications. The Rubber Gaskets are available in varied hardness and other physical parameters as per the client's requirements.These may sometimes be reinforced with Fabric insertion of Cotton/ Nylon/Metallic wire Mesh/ Solid Steel Insert.

Components :

• 'O' Rings- Washers- Gaskets for Manhole/Flanges in Full/ Falt Face or Raised Face
• Molded Components -Extruded Profiles/ sections -Self Adheshive Strip Panel Gasket
• Expansion Bellows- Hose Pipes

Available In :

• Viton® / FluroPolymer- Silicon® / HT Silicon- Food Grade(White/Translucent)
• Buna-N / Nitrile® / NBR- Neoprene® - EPDM – Butyl – Hypalon-Natural - Food Grade
• Natural / Neoprene® /EPDM / Silicon®

Our range of PTFE (Tefion®) Gaskets includes PTFE Encelope Gaskets and Expanded PTFE Sheet  Gaskets/Joint sealants. Machined componets like PTFE"0" rings, 'T' Bush, seats, seals or as per any special profile/ shape to your drawings. Solid PTFE gaskets/ Machined components are availble in Filled grade as well like Bronze / Carbon / Glass filled PTFE.
PTFE Envelope Gaskets manufactured by us are mainly in two types. Milled type (fused End) and Slit type (Machined). These Gaskets can have inserts of CAF, Rubber, PVC, Corrugated steel sandwiched between CAF/ Non Asbestors rings.

Milled Type Fused End : It is made to fit insert and presents a flat face to the flange. Fused End enveopes are being manufactured from Diameters of 400mm to any size with a maximum wall thickness of upto 10mm.

Slit Type : These Machined PTFE envelope variant are more suited for smaller diameters and larger quantities. It is perfectly adequate for varied applications.

We manufacture Ring Joint Gaskets conforming to R series in Octagonal / Oval shape, Bx and Rx series of API std 6A and ASME B 16.20. They are used in the production and refining process pipelines of oil and Gas Industries.

Made from solid metal types like :

• Soft Iron/LCS - Low Carbon Steel – Electroplated as per your specs zinc electroplated (By Default); Yellow Pacification; Cadamium Plated and Hot Dip Galvainsed.
• Stainless Steel AISI 304/316/321
• Income and other Alloy grades.

Our Spiral Wound Metallic Gaskets are skillfully Manufactured by spirally winding a preformed metal strip and filler on the outer periphery of metal winding mandrels. Its winding mandrel outsite diameter forms the inner diameter of the gasket and the hoop strip continually wounds until the required outer diameter is atained.

We offer Spiral Wound Metallic Gaskets in standards as per ASME B 16.20 Suitable for flanges of ANSI B 16.5, MSSP 44 Flanges for SORF, Tongue and Groove.

We Manufacture gaskets with Inner and Outer Ring with Partition Ribs for Tube Vessels, heat exchanges. These can be customized with standard and non-standard rhickness and sizes upto 2000 mm Outer Diameter as per the client Requirements.

Why Our Spiral Wound Metallic Gaskets?

• Adequate Flexibility. Can with stand high pressure. Longer working life

• Maintains a seal under variable and uneven loading

Winding Material (HOOP) Available In :

• Stainless Steel AISI 304/316/321.

• Monel

• Titanium

• Duplex

• Inconel

• Hastelloy

Filler Material Available In :

• CAF

• Non Asbestos Jointing

• PTFE

• Flexible Graphite

• Ceramic

The top-grade ptfe envelope gaskets provided by us are largely used in various industries in different processes and purposes. We offer these ptfe envelope gaskets in two types namely milled type and slit type. These gaskets can have inserts of caf, rubbera, corrugated steel sandwiched between caf rings, pvc. the clients can avail the ptfe envelope gaskets manufactured by us in varied specifications, shapes, and sizes as per their requirements.

Metal Jacketed Gaskets find their application in  HIGH PRESSURE and HIGH TEMPERATURE conditions. Its structure is easily compressible with tightening loads lower than those required for solid metallic gaskets.

Applications :

• Sealing of heat exchangers
• Valve cover
• Autoclaves
• manhole

Availability :

• Single Jacketed
• Double Jacketed
• Corrugated Jacketed

Sheet Metal Options :

• SoftIron
• AISI 304/316/321
• Copper
• Brass

FILLER Available In :

• Asbestos / Non Asbestos
• CAF
• PTFE
• FLEXIBLE GRAPHITE
• CERAMIC

With a well-organized set up, we serve our buyers from Mumbai(India) to every nook and corner. Since inception, we are serving divisive demands of the buyers by making available plentiful array of industrial gasket in the domestic market.

We Manufacture Expanded PTFE Gaskets and also Joint Sealants. The high-grade Expanded PTFE Sheet Gaskets is made by special process that produces a uniform and highly fibrillated microstructure. Attributes Can seal uneven damaged flanges Resist all chemicals except melted alkali metal, fluorine at liquid and gas states Excellent flexibility Simple to cut and install Specifications Compressibilty : 66% (ASTM-F36) Recovery : 16% (ASTM - F36) Material : 100% Pure PTFE, produced in an expanded microporous structure Temperature : -240 c to + 270 C (for short bursts + 310.C) pH range : 0 - 14 pH except molten alkali metals and elemental fluorin Pressure : 3000 PSI (210 BAR)

Our range of PTFE (Teflon) Gaskets includes PTFE Envelope Gaskets and Expanded PTFE Sheet Gaskets / Joint Sealants. Machined components like PTFE 'O' rings , 'T' Bush , seats , seals or as per any special profile / shape to your drawings. Solid PTFE gaskets / Machined components are available in Filled grade as well like Bronze / Carbon / Glass filled PTFE. PTFE Envelope Gaskets manufactured by us are mainly in two types - Milled type (fused End) and Slit type (Machined). These Gaskets can have Inserts of CAF, Rubber, PVC, Corrugated steel sandwiched between CAF / Non Asbestos rings. Milled Type - Fused EndIt is made to fit the insert and presents a flat face to the flange Fused End envelopes are being manufactured from Diameters of 400mm to any size with a maximum wall thickness of upto 100mm Slit TypeThese Machined PTFE envelope variant are more suited for smaller diameters and larger quantities. It is perfectly adequate for varied applications.