G.a.s. Engineers

Pozhichallur, Chennai, Tamil Nadu

As a well-known Manufacturer and Supplier of Vibratory Motors in Chennai (India), we offer a dependable product. The Vibratory Motors, offered by the company, are fully enclosed with a 3-phase squirrel cage induction motor that comes with an eccentric weight that is mounted on both the shaft ends and is adjustable as well. By the adjustment of both the eccentric weights of the Vibratory Motor, the rate of vibration can be easily varied. The point of caution is the selection of shaft material and bearing as it has the capability of altering the capacity to withstand heavy radial load. About Vibratory Motor

• Mainly used in vibratory screen, feeder, silos, bin and other material handling equipments
• Available in foot mounted and flange-mounted types
• Can be availed in different capacities
• Efficient and requires low maintenance

We are counted as a dependable Magnetic Filters Manufacturer and Supplier in Chennai (India). The Magnetic Filters, offered by us, are made by using the best grade stainless steel tubes. The tubes used for the manufacture of the Magnetic Filters consist of many permanent magnetic discs which are specially designed for the generation of high level magnetic forces. The Magnetic Filter, offered by us, can be produced by the use of the numerous forms of magnets like the ferrite or rare earth magnets. The stainless steel tubes present in the Magnetic Filters have a diameter of either 1� or 1.5�. The Magnetic Filters, provided by us, are available in various sizes while their width and length differing between 9 to 24 inches. The Magnetic Filters also come in various shapes like circular or rectangular shapes. Customized sizes and shapes of the Magnetic Filters are also offered. Applications Of Magnetic Filter

• Used for trapping ferrous impurities in various minerals, plastics foods stuffs, raw materials, etc. in powder form
• Can be installed, in hoppers, chutes etc

We are offering hump magnet separators. hump magnet separators are used to remove ferrous contaminants iron nuts, bolts, wire etc. From the conveyed material. With the hinged doors, cleaning the magnetic surface is quick and easy. The unit can be mounted directly in the air stream with the square to round transitions, which can be provided. Hump magnetic separators consists of two plate magnets, which are hinged and gasketed to the rugged steel housing. These plate magnets can be unlatched and swing open for quick manual cleaning.

We are offering magnetic drawer housing. Multiple stage filters (housing) are useful for high purity applications in a housing, more than one filter is placed one over the other. This is to ensure that if the ferrous impurity is not trapped in the first stage, it will be trapped in the subsequent stages there are two types of housing manual cleaning type and self cleaning type.

We are offering magnetic pulleys. we are engaged in manufacturing and supplying a wide series of magnetic separator pulleys used as head pulleys in belt continuous and automatic removal of tramp metal from material flow. Known for robustness and durability, the comprehensive range of powerful permanent magnet separation pulleys manufactured by us meet the size and installation requirements of most conveyor systems applications. At g.a.s the magnetic pulleys are manufactured in four different hub styles-extended hubs, flush hubs, recessed hubs and with out hubs. Our manufactured magnetic pulleys are available with or without lagging and with crowned or flat faces. The pulley shafts are removable mild steel and are available with optional stainless steel shaft. The standard size of the pulley varies from 4 diameter by 10 face width. Features 304 stainless steel faces removable mild steel shaft four hub styles flat face keyway and set screws

We are offering magnetic filters. magnetic filters are made up of stainless steel tubes. Each tube consists of an aray of permanent magnetic discs specially designed and configured to generate high magnetic forces. The filters can be supplied using either ferrite or rare earth magnets. The tubes have a diameter of either 1 or 1.5. The filters can be supplied in various size with width and length varying from 9 to 24 inches. Circular or rectangular shapes are offered. Customized sizes and shapes also be offerered. Applications :magnetic filters are used for trapping ferrous impurities in various minerals, plastics foods stuffs, raw materials, etc. In powder form. They can be installed, in hoppers, chutes etc.

We are offering horizontal screen. vibrating screens are used for vibratory motors to drive the mechanism. It has several advantages like simplicity, compactness, and reduced maintenance and less installation cost. By mounting the entire drive mechanism on screen, many accessories are made by external drive motor, motor support, v belts and shaft drive components. It is designed for wet and dry operation. These machines offer outstanding services in product sizing, regretting, medium recovery, and trash removal. Screen sizes range from 300 x 900 mm to 3000 x 9000 mm in single, double and triple deck configurations. The deck materials include wire mesh, polyurethane and perforated plate. Accessories such as dust enclosures, integral spray pipes, sub frames, outlet chutes are also provided. Rectangular screen separator made by us goes according to the pattern specification and requirement. Features: versatile all round applications. These are efficient for screening of wet and dry sand, gravel, crushed stone, plastics, ores and minerals. simple efficient vibrating motor offer drive mechanism rugged construction. compactness: less area required for installation and no external drives inclined screen: we manufacture a wide range of inclined screen that fulfills the specific requirement. These machines are powered by paired vibrating motors or three motors and tested externally by driven single oscillator mechanism. These screens can be made for variant configurations, number of decks and screen sizes.

We are offering vibro finishing machine. vibro finishing machine is a bowl type centrifugal finishing machine. The machine bowl is loaded with suitable ceramic / plastic or steel media and the components to be processed. The mutual rubbing action takes place inside the chamber due to the gyratory vibrations, compared to other simpler processes this method completes the deburring process faster. Features:vibro finishing machine is driven by powerful vibratory motor causing intense rubbing and trouble free output. heavy duty vibratory motorrubber liningbowl is stress relieved. heavy duty springs.

We are offering material handling equipments. bucket elevator : bucket elevators available inm.s/ s.s./p.v.c. sizes varies frombucket sizes : 100 50 70125 60 75200 75 100chain drives / belt drives both areavailable depending on

We are offering conveyor belts. sizes varies from : 600mm, 750mm, 900mm & 1200mm width at on inclination of 17 & 20 . Flat belt, slat & bag conveyors can be manufactured as per the customer requirment.

The company is one of the prominent Manufacturers and Suppliers of Magnetic Pulley in Chennai (India). The Magnetic Pulley, offered by the company, is one of the widely demanded Magnetic Products owing to its robust and durable nature and powerful permanent magnetic separation. The Magnetic Pulley can be used for the continuous and automatic removal of tramp metals from the material and is compatible with most of the conveyor systems. About Magnetic Pulley

• Shafts are removable mild steel and are available with optional stainless steel shaft
• Standard size of the pulley varies from 4 diameter by 10 face width.
• 304 stainless steel faces
• Four hub styles extended hubs, flush hubs, recessed hubs and without hubs
• Keyway and set screws
• Available with or without lagging and with crowned or flat faces

The company is one of the major Manufacturers and Suppliers of Magnetic Sweepers in Chennai (India). The Magnetic Sweepers, offered by the company, are designed to clean the floors and remove any small ferrous items. The Magnetic Sweeper is quite powerful and efficient and can be availed in light as well as heavy weights. The Magnetic Sweepers are available with stainless steel housing. Features Of Magnetic Sweepers

• Fitted with two large robust rubber wheels with puncture-proof tyres
• Well built and possesses very powerful magnetism
• Steel handle controlled by a long tubular steel handle and can be dismantled
• Simple design and easy to handle
• Mechanism to clean the surface of the magnet manually
• Corrosion resistant
• Very effective and consistent due to high flux density

We have carved a niche for ourselves as Manufacturers and Suppliers of Screen Separators in Chennai (India). The Screen Separator, offered by us, is unique particle size and gradable form of separators that is designed for providing a higher level of capacity per meter square of screening area. The Screen Separators also provide over size discharge of materials with lesser percentage fines than the other screening machines. The Screen Separators, offered by us, are quality products known for their efficiency and reliability. The standard sizes of the Screen Separators are of 24 36 and 48 diameters and the custom sizes can also be delivered on the client request. Working Principle Of Screen Separator

• The top weight on the motor shaft rotates in a plane close to the center of the mass of assembly.
• Rotation of the top eccentric weight creates vibration in the horizontal plane that causes material to move across the screen cloth to periphery.
• Increasing the top eccentric mass increases the horizontal throw, causing oversize materials to discharge at a faster rate.
• The bottom eccentric weight rotates below the center of mass, creating tilt on the screen, giving vibration in vertical and tangential planes.
• Increasing the vertical component of motion promotes the turnover of material on the screen surface, helping maximum quantity of under-size material to pass through the screen.
• The vertical motion minimizes blinding of screen by near size particles.
• The tangential component of motion is controlled by the angle of lead given to bottom weights with relation to top weight.
• Variation in lead angle controlled the spiral pattern of material travel over the screen cloth can be set by the operator for maximum throughout and screening efficiency for any screen able product be it wet or dry, coarse or fine, heavy or light, hot or cold.
• Typical material passes rapidly through the screen during its travel to the periphery.
• The oversized material get continuously discharged through a tangential outlet.

These magnets are alloys of the rare earth element neodymium composed with iron and boron formulized as NdFeB. With the highest ever energy product and magnetic strength to the order of 12, 000 Gauss, they are the best alternative to weight size and performance sensitive applications.