Our Products
Steel Bars
1 Products availableElectrodes
1 Products availableOur Complete range of products are Stainless Steel Wire, Galvanized Wire, High Carbon Steel Wires, Low Carbon Steel Wires and Aluminium Alloy Wire.
Trolleys, Centrifugal Baskets, Scrubber Scouring Pads Instrument Baskets, Bird Proofing System Screens, Staples, Flexible Connectors, Gratings & Mattes, Bicycle Spoke, Springs, Wire Rope, Cold Heading, Conveyor Belts, Braiding Hoses, Nail, Chain, Lashing Wire, Wall Tie, Mig and Tig Wires, Redrawing Wires, Wire Mesh, Kitchen Accessories, Balls etc.
| Regular Grades (AISI) | 201, 202, 204CU, 302, 304CU, 304HC, 303, 304, 304L, 310, 314, 316, 316L, 316Ti, 321, ER308L, ER309L, ER310, ER316L, 430L. ETC. |
| Diameter Range | 0.040 mm – 12 mm (0.0016” - 0.4724”) |
| Supply Condition | Soft, ¼ Hard, ½ Hard, ¾ Hard & Full Hard |
| Surface Finish | Bright, Matte Finish, Soap Coated or Electro Polish Quality |
chains, kitchen accessories & wire baskets, wire mesh, hooks, nails & fasteners, wall ties, conveyor belts, braiding hoses, brushes, staples, spokes, welding electrodes, cable tray, s.s. Balls, wire ropes, springs
advantages : uniform zinc coating.
| Raw Material | SAE 1006 -1070 |
| Diameter of Wire | 1.20 - 5.00 mm |
| Tensile Strength | 350 - 1800 N/mm2 |
| Weight of Coil | 100 - 900 kgs |
| Zinc Coating | 40 - 300 gms/m2 |
Conveyor Belt, Brushes, Fencing Wires, Welded Mesh, Vineyard Wire, Poultry Cages, Push & Pull Cables, Strand For Ropes & Mechanical Control Cable
Our technically advanced manufacturing process, combined with advanced process control, ensures conversion from raw material to a final product of the highest quality.
Garg Inox high carbon steel wire production facilities include substantial galvanising and patenting heat treatment Processes.
The High Carbon Steel Wires are available in 2 types of Finishes :
| Raw Material | SAE 1035 -1085 |
| Diameter of Wire | 0.15 - 3.50 mm |
| Tensile Strength | 1000 - 2500 N/mm2 |
| Weight of Coil | 100 - 700 kgs |
| Zinc Coating | 30 - 220 gms/m2 |
| Standards Followed | |
| Confirming IS | 4454 (Spring) |
| Confirming IS | 1835 (Wire Rope) |
| Confirming BS EN | 10264-2 (Wire Rope & Conveyor Belt) |
| Confirming BS EN | 10257 (Fencing) |
| Confirming BS EN | 10257 - 1 (Mechanical Spring) |
| Confirming Din | 2.78 (Steel Wire Rope) |
Hot-dipped zinc plated wire is also known as hot dipped Galvanized Wire or thermal Galvanized Wire. It is made by means of wire drawing followed by heat treatment and zinc plating.
Advantages : Uniform Zinc Coating.
| Raw Material | SAE 1006 - 1010 |
| Diameter of Wire | 1.20 - 5.30 mm |
| Tensile Strength | 400 - 550 N/mm2 |
| 600 - 700 N/mm2 | |
| Weight of Coil | 100 - 700 kgs |
| Zinc Coating | 30 - 150 gms/m2 |
| Surface | Bright Finish |
| Bright Finish (Silver) |
Aluminiums unique combination of properties make it a highly versatile material when alloyed with various metals. Besides light weight characteristics and corrosion resistance property its excellent workability make it an natural choice for industrial use. AL-ALLOY wires are used in many products by the leaders of the industry as raw material.
| Diameter (mm) | Tensile Strength (N/mm2 ) | Elongation (%) | Resistivity at 20°C | Diameter Tolerance (mm) |
| 0.22 | ≥ 210 | ≥ 12 | ≥ 0.051 | +/- 0.006 |
| 0.20 | ≥ 210 | ≥ 10 | ≥ 0.051 | +/- 0.006 |
| 0.18 | ≥ 210 | ≥ 9 | ≥ 0.051 | +/- 0.005 |
| 0.16 | ≥ 210 | ≥ 8 | ≥ 0.051 | +/- 0.004 |
| 0.15 | ≥ 210 | ≥ 8 | ≥ 0.051 | +/- 0.004 |
| 0.12 | ≥ 210 | ≥ 7 | ≥ 0.051 | +/- 0.004 |
| Standard 5154 | Si 0.45 | Fe 0.45 | Cu 0.10 | Mn 0.8 - 1.3 | Mg 2.8 - 3.5 | Zn 0.20 | Ti 0.20 | Al Remaining |
Optimized chemical composition for an excellent weld-ability
Excellent arc stability and low spatter losses minimize extra cost of cleaning
Uniform diameter ensures excellent feed-ability, high weld efficiency, smooth & uniform weld beads
Excellent feeding by optimized mechanical properties of the wire.
| mm | 0.80 | 0.90 | 1.00 | 1.20 | 1.60 | 2.00 |
| inches | 0.030 | 0.035 | 0.040 | 0.045 | 0.062 | 0.078 |
Copper clad aluminium wire is produced with the production process of cladding welding drawing method. By cladding copper strip concentrically on the outer surface of the aluminium core. To meet customers requirement wire is treated and drawn several times. CCA wire has the characteristics of both copper wire & aluminium wire low density from aluminium wire & good conductor from copper wire. This kind of bimetallic wire is suitable for most electrical applications.
| Tele communications | CATV | Coaxial drop wire | Antenna wire | Composite cables | 50 ohm antenna cable | |
| Telephone | Drop wire | Telephone conductor | ||||
| Electric Utilities | Transmission Lines | Buried counterpoise wire | ||||
| Data Cable | Structure ground leads | Flexible Cable | ||||
| Switch Yards and Substations | Substation ground grid wire | Fence and structure grounds | ||||
| Distribution Lines | Pole ground wire | Transformer grounds | ||||
| Generation Plants | Building lightning protection | Building ground wire | ||||
| Industrial | Drop wire | Magnet wire | Transformer windings | Building wire | Automotive wiring harnesses | Battery cables, Railway Signals |
| Electronics | Substation ground grid wire | Fence and structure grounds | Coax center conductor for LANs | Electronic components | Lead wire for transistors, resistors, capacitors | Radio frequency shielding |
| Transit | Substation ground grid wire | Fence and structure grounds | Catenaries messenger wire | Grounding wire | Guy wire |
Consistent chemical & mechanical properties Embossed at the end for easy identification Excellent arc stability & low spatter loss Uniform diameter throughout.
| mm | 1.20 | 1.60 | 2.00 | 2.40 | 3.20 | 4.00 | 5.00 |
| inches | 0.045 | 0.062 | 0.080 | 0.093 | 0.125 | 0.156 | 0.187 |
Core wires are supplied in coil as well as in cut lengths as per AWS , DIN , BS , JIS , and other equivalent international standards or as per the customers requirement.
| mm | 1.60 | 2.00 | 2.40 | 2.50 | 3.20 | 4.00 | 5.00 |
| inches | 0.062 | 0.078 | 0.094 | 0.098 | 0.125 | 0.156 | 0.187 |
Bahadurgarh, Haryana 