Our Products
Pumps, Pumping Machines & Parts
2 Products availablePlumbing Traps
2 Products availableMonoblock Pumps
1 Products availableSubmersible Pumps
1 Products availableIndustrial & Engineering Products
1 Products availableOur product range contains a wide range of PRDS Stations
Rex H-series rotary joint is a self supported unit designed specifically to run at higher machine speed and higher pressure and temperature than conventional self-supported joints with a minimum of downtime. The carbon or carbon filled PTFE seal under compression rather than tensile load provides higher strength and exceptional service life. Two wide spaced carbon bush bearings ensure absolute support. With two separate bush bearings, a greater contact area is maintained between the bushes and nipple. This means the H-Series joint has much greater radial support than single guide ring joints a difference that translates longer. These carbon guide bushes are locked into place with the joint housing by pins or keys. They are available in a full range of sizes from ½” to 10” in through flow, dual-flow with stationary syphon and dual-flow for rotating syphon services. Rex H-Series joints can be used with practically all media. They are particularly recommended for higher temperature up to 350 Degree Centrigrade. Hot Oil application or where severe thermal expansion is present. They are suitable for 510 PSI (35 Bar ) pressure and 6500F (350 Degree Centrigrade) temperature and maximum speed up to 200 rpm. THE BENEFITS
Technical Specification
Model | Size | Material | End Connections | PMA (Kg/cm²)/ TMA (°C) | Cap. At PMO (Kg/hr) |
---|---|---|---|---|---|
PD11 | DN 15, 20 | A743 Gr. CA40 | Screwed (NPT/BSPT / BSP), SW | 42/426 | 890 |
PD61 | DN 15, 20, 25 | Cast Iron | Screwed (NPT/ BSPT / BSP) | 16/220 | 659 |
PD61SS | DN 15, 20 | A351 Gr. CF8 | Screwed (NPT/ BSPT / BSP), SW, FL | 16/220 | 625 |
PD62 | DN 15, 20, 25 | A216 Gr. WCB | Screwed (NPT / BSPT / BSP), SW, FL | 16/220 | 1529 |
PD63 | DN 20, 25, 32 | Cast Iron | Screwed (NPT/BSPT / BSP) | 16/220 | 1800 |
PD65 | DN 25 | Cast Iron | Screwed (NPT /BSPT / BSP) | 16/220 | 1529 |
PD66 | DN 40, 50 | A216 Gr. WCB | Screwed (NPT /BSPT / BSP), SW, FL | 16/220 | 18360 |
Backed by a team of proficient quality inspectors, we provide only quality assured products to the customers. One-stop destination for presenting quality Swivel Joint, we are a notable supplier in this field.