GST : 24ACYPR5908A1ZD
Verified
Write a Review
Our Products
Paper & Paper Products
1 Products availablePackaging Board
1 Products availableLeading Manufacturer, Supplier & Retailer of brown paper bag, Paper Laminated HDPE Bag, Brown Kraft Paper Sheet, Corrugated Sheet and Cement paper bag.
PP Flute Boards It is corrugated sheet which is made from polypropylene. It is stronger, more useful and more hygienic than the other materials in sector. It shows extra strength against moisture and chemical actions. Corrugated plastic sheets reduce cost, It is corrugated sheet which is made from polypropylene.
Application :
Sampling : The sizes of the samples are approx A4 but sizes may vary slightly depending on availability.
Delivery : Orders are delivered via a next day service and we aim to dispatch all orders within 48 hrs, 80% of our orders are currently being delivered within 3 working days from ordering. However during busy periods, or if the product is out of stock, we may dispatch within three to four working days from when we receive your order.
Track Order Status : We pride ourselves on great customer service and communication – during the order process you will receive several emails to keep you up to date with the status of your order and also when it has been dispatched.
Packing : All sizes of this product are dispatched with protective bubble sheet and Woven sacks on both side.
Dispatch information : We have an excellent relationship with our Transporter service and all orders are meticulously packed using a variety of materials to ensure the sheets arrive in excellent condition.
Details
| - | Corrugated Plastic | Corrugated Cardboard | Injection Plastic |
|---|---|---|---|
| Project Development | Fast and Cheap | Fast and Cheap | Quite expensive |
| Strength & Power | Resistant against slight tear and puncture | Easily teared and punctured | Can crack in a heavy, rigid single-pulse |
| Cleaning | Leaves no dust or fluff | Can leave dust or fluff on materials | Leaves no dust or fluff |
| Cost | Long-term savings because of it is reusable | Short life and recycle is costly | Long-term savings because of it is reusable |
| Delivery | Its production is quite fast | Its production is quite fast | 5 times slower comparing to others |
| Moisture & Chemicals | Waterproof and resistant against chemical effects | It deformities | Waterproof and resistant against chemical effects |
| Color | In many requested colors and in special colors | Only white and brown | Limited color possibility |
| Recyclability | Reusable and Recyclable | Re-creatable waste | Reusable and Recyclable |
Color Chart
Graph
Additional Information:
Delivery Time : 20 days
Details
| Property | Test Method | MX 750 |
MX 1000 |
MX 1500 |
MX 2000 |
MX 2500 |
|---|---|---|---|---|---|---|
| Minimum Average Values | - | - | - | - | - | - |
| Thickness, mm | ASTM D 5199 | 0.75 | 1 | 1.5 | 2 | 2.5 |
| Density, g/cm3 | ASTM D 1505 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 |
| Tensile Properties (each direction) | ASTM D 6693 | - | - | - | - | - |
| 1. Strength at Yield, N/mm width | Type IV Specimen | 11 | 15 | 23 | 30 | 35 |
| 2. Strength at Break, N/mm width | ,@ 51 mm/min | 8 | 11 | 16 | 21 | 27 |
| 3. Elongation at Yield, % | G.L.33mm | 13 | 13 | 13 | 13 | 13 |
| 4. Elongation at Break, % | G.L.50mm | 100 | 100 | 100 | 100 | 100 |
| Tear Resistance, N | ASTM D 1004 | 93 | 122 | 187 | 245 | 300 |
| Puncture Resistance, N | ASTM D 4833 | 240 | 280 | 415 | 530 | 770 |
| Carbon Black Content,% | ASTM D 1603 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Carbon Black Dispersion | ASTM D 5596 | Satisfactory | Satisfactory | Satisfactory | Satisfactory | Satisfactory |
| Width | - | 7mtr | 7mtr | 6mtr | 5mtr | 5mtr |
Details
| Property | Test Method | MD 500 |
MD 750 |
MD 1000 |
MD 1500 |
MD 2000 |
MD 2500 |
|---|---|---|---|---|---|---|---|
| Minimum Average Values | - | - | - | - | - | - | - |
| Thickness, mm | ASTM D 5199 | 0.5 | 0.75 | 1 | 1.5 | 2 | 2.5 |
| Density, g/cm3 | ASTM D 1505 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 |
| Tensile Properties (each direction) | ASTM D 6693 | - | - | - | - | - | - |
| 1. Strength at Yield, N/mm width | Type IV Specimen | 8 | 11 | 13 | 23 | 30 | 37 |
| 2. Strength at Break, N/mm width | ,@ 50 mm/min | 13 | 20 | 25 | 42 | 57 | 71 |
| 3. Elongation at Yield, % | G.L.33mm | 13 | 13 | 13 | 13 | 13 | 13 |
| 4. Elongation at Break, % | G.L.51mm | 700 | 700 | 700 | 700 | 700 | 700 |
| Tear Resistance, N | ASTM D 1004 | 72 | 92 | 120 | 175 | 257 | 320 |
| Puncture Resistance, N | ASTM D 4833 | 170 | 260 | 325 | 490 | 650 | 860 |
| Carbon Black Content,% | ASTM D 1603 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Carbon Black Dispersion | ASTM D 5596 | Satisfactory | Satisfactory | Satisfactory | Satisfactory | Satisfactory | Satisfactory |
| Width | - | 7mtr | 7mtr | 6mtr | 6mtr | 5mtr | 5mtr |
Details
| Property | Test Method | ML 500 |
ML 750 |
ML 1000 |
ML 1500 |
ML 2000 |
ML 2500 |
|---|---|---|---|---|---|---|---|
| Minimum Average Values | - | - | - | - | - | - | - |
| Thickness, mm | ASTM D 5199 | 0.5 | 0.75 | 1 | 1.5 | 2 | 2.5 |
| Density, g/cm3 | ASTM D 1505 | 0.92 | 0.92 | 0.92 | 0.92 | 0.92 | 0.92 |
| Tensile Properties (each direction) | ASTM D 6693 | - | - | - | - | - | - |
| 1. Strength at Break, N/mm width | Type IV Specimen | 13 | 20 | 27 | 40 | 52 | 66 |
| - | ,@ 51 mm/min | - | - | - | - | - | - |
| 2. Elongation at Break, % | G.L.33mm | 800 | 800 | 800 | 800 | 800 | 800 |
| Tear Resistance, N | ASTM D 1004 | 50 | 67 | 100 | 150 | 200 | 250 |
| Puncture Resistance, N | ASTM D 4833 | 120 | 190 | 250 | 370 | 500 | 610 |
| Carbon Black Content,% | ASTM D 1603 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Carbon Black Dispersion | ASTM D 5596 | satisfactory | satisfactory | satisfactory | satisfactory | satisfactory | satisfactory |
| Width | - | 7mtr | 7mtr | 7mtr | 6mtr | 5mtr | 5mtr |
