Our Products
Wooden & Bamboo Handicrafts
2 Products availableBicycles, Bicycles Parts And Accessories
2 Products availableClamps
2 Products availableSweets & Namkeen
2 Products availableDrill & Boring Equipments
2 Products availableMandrel
2 Products availableDiamond Tools
1 Products availableRoll Forming & Bending Machines
1 Products availableWe offer a complete product range of wood drawplate, Loupe, MOVEMENT HOLDER, prong pusher grooved and Hexagonal Rotating Head
Extra wooden bench pin available for Item No. 174 size : 40 mm x 100 mm. Total Length: 7
For flattening and shaping, Made from Hardened Steel. Has flat horns and hole in top for riveting.
Hardened Steel Bench Block, grooved on all four sides for somfortable holding. Rounded on all four corners so no sharp edges. Finely ground polished.
Just twist the string around the shaft and press down on the wooden bar. The drill will spin and the weighted wheel gives it enough mementum to repeat action, Available with extra collet which opens from 0 2.50mm.
Spin the top shaft and the bowl rotates freely. Pour in tiny beads
to half the level and inserting the J Needle will work magic for
stringing these miniature beads.
Set in a Polished hardwood with half round polished
steel head for rolling bezels around stones
1.80mm Cup Bur fitted in wood handle with Brass Ferrule. For
rounding / deburring off wire ends.
Made from Rubberwood, drawplate with 12 holes ranging from 1.00mm to 8mm.
Excellent finished Brass Head. Round at one end, flattened in the front face. Finished hardwood handle.
Head Length: 2" / 50mm.
Head Dia: 5/8" / 16mm.
Overall Length: 9.1/4".
Made from Aluminum Anodized Head, with Replacable Nylon Heads on both sides. 1" / 25mm Head Size. Leaves no mark on striking.
18mm 10X, Working Distance 1". Available in 3 different finishes with Leather case Individually packed. Also available in Triplet lens.
Finishes | Weight | Ref No. |
---|---|---|
Golden | 045 | 130 |
Chrome | 045 | 131 |
Black | 045 | 132 |
we are offering a wide range of bezel pusher square jewelry equipment, square faced. policed and hardened steel pusher, mounted in a hardwood handle. used for tightening of prongs & beads. |
Made from Polished Stainless Stell Straight Blade with
Comfortable wood handle. Used to open or close bezel setting in hard to reachplaces. Overall Length 6"
For sorting rough & polished diamonds.
Made from Stainless Steel as well as Nickel Silver.
Available in Plate Dia: 47mm, 66mm, 80mm & 107mm.
42 Plates | 000 to 20 & 1.5 to 19.5 | 455 | 201 |
23 Plates | 000 to 20 | 273 | 202 |
Made from Hardened steel for spring action. Jaw opens upto 4.00mm. With polished wood handle for comfortable grip.
Sping Loaded tool. When compressed opens up the 4 pins to easily clamp any objects
Nail nailer (pin pusher) has the added advantage of an adjustable
depth stop to ensure that all pins are pushed 'home' to the same depth
Grooved steel end with a comfortable wood handle. Used to push prongs to crown points accurately.
Comfortable to hold plastic handle. Widely used for cutting rubber moulds.
For tools with 3/32" shank. Made from Steel.
For right shaft with spare Key.
Used to hold all leather center buffs in chuck. Grips on a 6mm
chuck / collet
Heavy metal black base with ball joint attachments which can be rotated in any position holding tweezers.
Holds tube for setting stones firmly. Available with interchangeable 7 collets. Holds from: 1/32" to 1/4".
Compact, convenient wrench for waterproof cases. With hardened pins and easy to use adjusting wheel.
Spiral type hand drill, turns by pushing centre piece up and down. Collet Holds: 0 1.20mm.
Type | Weight | Ref No. |
---|---|---|
With Spring | 023 | 150 |
Without Spring | 022 | 151 |
Grip on your needle file for increasing accuracy, with mechanised chuck and hardwood handle.
Supplied with 3 interchangeable collets which enables small twist drills to be held. Fully steel constructed with black finish.
Three collets hold: 0mm, 1.60mm & 2.60mm
Sliding Knurled Ring to close Steel Jaws making it easy to operate.
Collet Holds: 0 1.20mm.
Free Hexagonal Rotating Head, Suitable for Hand Re-Tapping, Reaming, Drilling, Screwdriver etc.
Comes with 2 Double ended collets.
Collets Hold: 0.00 1.00mm & 1.50 2.50mm.
Made from quality steel for durability and long life. Black Finish.
Size | Opens From | Weight | Ref No. |
---|---|---|---|
76mm | 0 – 1.00mm | 021 gms | 154 |
86mm | 0 – 1.50mm | 022 gms | 155 |
96mm | 1.50 – 3.00mm | 040 gms | 156 |
105mm | 2.70 – 4.50mm | 041 gms | 157 |
Fine Finished wooden version with locking screw at the end.
Made From Hardened Tool Steel. These Mandrels are very useful for forming, shaping rings and stone setting. Accomodates Ring Sizing # 1 15 with 1/4 increaments. Laser Marked Readings.
Finishes | Weight | Ref No. |
---|---|---|
Steel | 750 gms | 215 |
Steel Grooved | 730 gms | 216 |
Solid Aluminum Ring Mandrel Anodized to make it harder and durable. Accomodates Ring Sizing # 1-15 with 1/4 increaments. Laser Marked Readings.
Finishes | Weight | Ref No. |
---|---|---|
Plain | 280 gms | 217 |
Grooved | 270 gms | 218 |
Ball Shaped Wooden handle useful for setting, reaming, tappling etc.
Wood handle is bored and reinfored, can be threaded onto tapered spindle for small wheels & burs can be used on larger polishing motor
Fixed Length Frame well Balanced.Rotating the handle helps tighten blade.
Available with Standard 32 TPI junior blade.
The frame is blue coated with hardwood handle.