Our Products
Our offered Product range includes Hydraulic Operation Table, C-ARM ELECTRICAL OT TABLE, STAINLESS STEEL FACULTY TABLE, ORTHO ATTACHMENT OT TABLE and Labour Table.
1. Lever action Hydraulic Lift controlled by a foot Pedal.
2. Five section stainless steel top gives anatomic adaptation to the patient body.
3. Built-in Kidney Bridge and large perineal cut-out for drainage.
4. All the operating positions including Proctology, Lithotomic, Chair, Flex, Reflex, Trendelenburg and Reverse Trendelenburg, Lateral Tilt etc. Can be obtained from either side of the table by working of different handles. Mattress provided.
Major C-ARM compatible OT table with smooth electro mechanical drive. Six Section X-Ray translucent Top with inbuilt kidney bridge. The top is eccentrically positioned for C-ARM imaging. Operating positions include Height Adjustment, Lateral Tilt, Trendelenburg & Reverse Trendelenburg, Back Section Raising etc can be easily achieved by Hand Held remote switch. Head and Leg sections are manually interchangeable for the Chair Position. Base & Column covers are made of Medical Grade Stainless Steel which is non-reflecting and is anti-bacterial. 34 Hours battery backup to avoid electrical connections during OT. Maximum load capacity 200 KG.
Standard Accessories :
1. Anesthetic Screen Frame (L Shaped) - 1 Pc
2. Shoulder Support with pad. -1Pair
3. Arm Boards with pad.- 1 Pair
4. Lateral Support with pad.-1 Pair
5. Knee crutches Geopel type-1 Pair
6. Water proof foam, rexene mattress-1 set
Optional Accessories:
1. Ortho attachment
2. Neuro Attachment
Size:
Ortho Attachment allows the table to be used for the lower extremity procedures. Available at competitive prices our ortho attachment is purely made of stainless steel which resist corrosion.
Features :
The Orthopaedic Attachmentcan be used with any operating table.
In addition, a pelvic support plate is supported on top of the frame and is formed with an asymmetrical construction.
Stirring Instruments allows flexion/rising of legs & stirring/string ball joints locked from foot end.
Two traction devices on sliding spot with ball joint allowing flexions & rotations of foot with traction shoe with metallic sole.
Padded orthopaedic knee crutches/provides support to the legs of the patient.
Standard Accessories:
1.Lateral support
2.Shoulder support
3.Arm rest
4.Crutches holder steel clamp
5.Lithotomy crutches
6.Ortho foot plate with shoes
7.Bed side arm rest for arm operations
Size:
Size:
Description:
1. Mild Steeltubular framework of 31mm dia and 25mm dia.
2. 1.2 mm MS sheet top. Head section can be adjusted on ratchet. Two leg supports of 16 mm rod.
3. Epoxy powder coated synthetic enamel finish.
Size:
Size:
Description:
1. Built of 31 mm and 25 mm dia Mild Steel tubes.
2. 1 mm thick Stainless steel top sloping towards foot end with 50 mm dia hole for drainage.
3. Epoxy powder coated synthetic enamel finish.
Size:
Description:
Size:
Description:
1. Mid Steel tubular construction with 1 mm thick CRCA sheet, machine pressed .
2. Head rest adjustable on ratchet mechanism.
3. Pre treated and epoxy powder coated synthetic enamel finish.
Size:
Length OT Table | 1900mm |
Width of Table Top | 520mm |
Trendelenburg / Reverse | 30 / 25 |
Lateral tilt | 20 / 20 |
Back Section | +-60 degrees |
Head Section | +-60 degrees |
Floor Locking System | Manuel |
Head Rest (up / down) | 20 / 60 |
Description:
Mayfield 3 - Pin Retractor with Head [Prone &
Sitting Position]
Sujita Head Clamp [Prone & Sitting Position /
Head Fixator]
Spinal Bridge.
M Type Face Head Rest.
Neuro - Attachment for Sitting up Position
Head Rest.
Neuro Attachment for Prone Position Head REST
Features:
Provide stable support
High tensile strength
Corrosion resistant
Abrasion resistant
Size:
Description:
1. Built of 31 mm and 25 mm OD Mild Steel tube. 1.2 mm thick G.I. sheet top in three sections. Mounted on 62.5 castor wheels.
2. Leg supports made of 16 mm dia rod.
3. Synthetic enamel/ epoxy powder coated finish.
Size:
Description:
Size:
1. Built of 31mm OD Mild Steel tubes and 25 mm MS tube in two sections, which can be fastened and separated easily.
2. 1 mm thick Stainless steel sheet top. Head section is mounted on stump feet and leg section is mounted on 100 mm dia swivel castors.
3. Fitted with two lithotomy rods with strap.
4. Sectional Mattress is optional.
Size:
Technical Data
Length of Table 1900mm
Width of Table Top 520mm
Minimum Height (without Mattress) Min 750 mm
Maximum Height (without Mattress) Min 1000mm
Trendelenburg 25 degree
Reverse Trendelenburg 25 degree
Lateral Tilt +-20 degree
Back Section+-60 degree
Head Section+-60 degree
Leg Section 0-90 degree
Floor Locking System- Manual
Salient Features :
-Stainless Fitting
Detachable, head, leg & Pelvic section
In built kidney bridge
Five Sectional Radio - Translucent.
Base & Cover made of attractive, east to clean Stainless Steel.
Sophisticated mechanics provide smooth, step less articulation of the table Top for precise patient positioning.
Eccentric pillars