Ahmedabad, Gujarat, India
Our Products
Automatic Air Vent Vlaveis a reliable automatic venting device and is suitable for venting of air or gas from heating systems or heat process installations.
E121-3/8A= Standard version, Connection size R 3/8"
E121-1/2A= Standard version, Connection size R 1/2"
Honeywell VCBM series FCU balancing modulating valve is a new type of valve for FCU temperature control in HVAC hydronic system. It combines the dynamic balancing and electric modulating functions in one unit, It has a coherent structure, high flow control precision and stability. VCBM series FCU balancing modulating valve can also be used in zoning control and other applications when it has the same demand. VCBM series FCU balancing modulating valve is a self balanced flow and modulating control valve, used in 2-way modulating controls, of flow rate 0.28 to 2.3 m3/h. It consists of a VC79 series actuator and a VCBM series flow control valve with a replaceable modulating valve insert and a constant flow balancing cartridge.
VCBM Series Control ValveIntegrated dynamic balancing and electric modulatingcontrols in one unitHigh accuracy constant flow control. Within controlrange, differential pressure fluctuation across thevalve will not affect flow rate.No calibration requiredQuick and easy installationIntegrated valve body reduced installation spaceBrass (Chrome) plated dynamic cartridge resistscorrosion & long service lifeTwist lock mount for actuator head. Actuator can beinstalled after plumbing work has been completed toprevent damageValve body is made of cast bronze which is not subjectto dezincification (due to oxygen dissolved inwater)The actuator provides sinusoidal piston travel actionfor perfect flow characteristic curve, to eliminate waterhammer synchronously in most applications.
VC79 series ActuatorAll actuators are interchangeable and suitable forvalves from through 1 providing installation flexibilitywith minimum stocking requirement.Actuator is powered by a unidirectional motor andcrank arm mechanism.Locking tab secures actuator to valve body. To removethe head, the tab must be depressed and actuatorrotated 45.Complete actuator is constructed for moisture andhumidity resistant material.
The V5013P is a three-way threaded globe valve that controls hot water, cold water, and glycol solutions (up to 50 percent concentration) in heating or cooling HVAC applications. The valve is used for mixing service to direct flow from one of two inlets to a common outlet in twoposition or modulating control systems.
FEATURESRed brass body with BSPT-threaded connections.Stainless steel stem and brass plug.Low seat leakage rate (0.05 percent of Cv).Spring-loaded, self-adjusting packing.50:1 rangeability per VDI/VDE 2173.Constant total flow throughout full stem travel.Accurate positioning to ensure state of the arttemperature control.Sizes range from 1-1/4 in. to 2 in.Suitable for pneumatic or electric/electronic actuation.Repack and rebuild kits available for field servicing.
SPECIFICATIONS
IMPORTANTThe specifications given in this publication do notinclude normal manufacturing tolerances. Therefore, an individual unit may not exactly match the listedspecifications. Also, this product is tested andcalibrated under closely controlled conditions andsome minor differences in performance can beexpected if those conditions are changed.
Models:V5013P Valve: Three-way mixing valve for water or glycol.BSPT-threaded pipe connections. Constant total flow. Pushdown valve stem to close bottom (B) port.Pipe Connections: Internal BSPT-threaded connections.Seat:1-1/4 in. to 2 in.: Integral brass (upper), replaceable brass(lower).ANSI Body Class: 300 psi.Stem: Stainless steel.Plug: BrassStroke: 3/4 in. (20 mm).Approximate Leakage Rate: 0.05 percent Cv.Rangeability: 50:1 per VDI/VDE 2173.Body Material: Red brass.Packing: Spring-loaded, carbon fiber reinforced PTFE Vrings.
Pressure-Temperature Ratings:Water: 36F to 248F, 217 psi (15 bar).248F to 337F, 185 psi (12.8 bar).Maximum Water Differential Pressure: 230 psid (15.8 bar).Maximum Differential for Quiet Water Service: 20 psid.Valve Flow Characteristics:Port A-AB: Equal percentage.Port B-AB: Linear.NOTE: Movement of the valve stem at any point of the flowrange does not significantly change the total flowrate at the AB outlet port (constant total flow).Valve Design Life: 250, 000 full cycles at maximum ratedtemperature.
Type miniature compact design needle valves are ideal for bubble tight shut-off in applications where spaceis at a premium. The mini series are available with metal to metal low torque seating (Stem Type MNV). Available with end connections in sizes 1/8 to 1/2 and as pipe connections.
APPLICATION:
TheBSV4-CWD Dual Plate Check Valvesis designed for Chilled & Hot Water for purpose non-return valve that is stronger, lighter in weight and smaller in size as compared to other Check valve.
TheBSV4-CWD Dual Plate Check Valvesis designed for Chilled & Hot Water for purpose non-return valve that is stronger, lighter in weight and smaller in size as compared to other Check valve.
FEATURES
Wide Size range (DN50DN300)
Cast iron Body
Lapped Ductile Iron disc
Wafer type and flange type Connection
Wide Size range (DN50DN200)
Operated by Lever
90 deg opening/closing operation
Cast iron Body
SS304 disc
Wafer type Connection
TM 50 thermostatic mixing valves provide control of the water temperature and are used: For centralised control on hot water supply units or for localised control adjacent to point-use outlets. Or for use with solar-heated hot water units with dual energy source. In heating systems with underfloor heating or for limiting boiler return temperatures. Where a system includes a hot water circulation circuit, a KB 191 return flow retarder unit (see accessories) must be fitted to prevent cold water backfeeding and cooling the mixed water at the outlets.
Special Features! Highly sensitive thermal element with good all-roundwater temperature sensing, even at low flow rates! Simple setting of the required water temperature! Scald protection - the hot water inlet is automatically cutoff if the cold supply fails provided that the hot water inlettemperature is at least 10 K higher than that of mixedwater setting! The cold water inlet is automatically cut off if the hot supplyfails! Inner components are of scale-resistant materials! Complies with KTW requirements
Range of ApplicationFlow medium: WaterOperating pressure Maximum: 10 barMaximum pressuredifference between hotand cold inlet supplies: 2.5 bar
These series class A gas valves are used for control and regulation of gaseous fluids in gas power burners, atmospheric gas boilers, melting furnaces, incinerators and other gas consuming appliances.
The VE series gas valves offer a series offunctionalities:Gas valves, Normaly Closed, consistingof a direct ON/OFF operator for opening/closing of the valve.Gas valves for use with HoneywellV4055, V4062 and V9055 fluid poweractuators.Relief valves with or without position indicationswitch, Normaly Open, consistingof direct electric ON/OFF operatorfor opening/closing of the valve.
The VE series gas valves are suitable forthe control of gaseous fluids in gas consumingappliances according to internationalstandards.The VE series gas valves meet the class Aspecification according EN 161.The VE series gas valves cover a widerange of pipe sizes from 3/8" (DN 10) upto and including 3" (DN 80).The VE series gas valves have threadedconnections from 3/8" (DN 10) up to andincluding 21/2" (DN 65).
The VE series gas valves with pipe sizes21/2" (DN 65) and 4" (DN 100) have flangeconnection.The VE series gas valves 3/8" (DN 10) and1/2" (DN 15) have an maximum supplypressure of 350 mbar.The VE series gas valves 3/4" (DN 20) upto and including 4" (DN 100) have an maximumsupply pressure of 200 mbar or360mbar on request.The VE series gas valves have test pointsfor inlet and outlet gas pressure. The VEseries gas valves have an inlet screen forprotecting the valve against ingress ofdirt
The VQ400 Series class A safety combination valves are used for control and regulation of gaseous fluids in gas power burners, atmospheric gas boilers, melting furnaces, incinerators and other gas consuming appliances. These combination valves are available in two versions: model VQ420/25 (pipe sizes 3/4 and 1) and model VQ440/50 (pipe sizes 1 1/2 and 2). The 1 1/4 connection is obtained by using a DN32 flange kit on a VQ440 body. The features and specifications of both models are identical (unless specified otherwise).
The Slam Shut Off Valve are safety devices normally open type. The automatic mechanism is triggered once the shut off plenum detects an inlet pressure greater than the calibration value, it releases the closure device which stops the gas flow.
Features:
Maximum Working Pressure : 6 BarEnd Connections: Flanged as per EN 1092-4 (PN16) or ThreadedResponse Pressure Range: Settable between 30-550mbar depending on spring.Ambient Temperature: -10 to 60CBody : Die Cast AluminumInner Parts: Aluminium, steel, brass and synthetic materialsDiaphragm and Gaskets: Nitrile Butadiene RubberSuitable for Natural Gas, LPG, Propane and other Non Aggressive Gases
