Our Products
Wires
1 Products availableNuts Bolts And Fasteners
1 Products availableWe are leaders in the market for providing best range of DCS Single Band Booster, 3G Single Band Booster, CDMA single Band Booster, GSM Dual Band Booster (900MHZ & 3G 2100) and Dual Band Booster (1800MHZ & 3G 2100)
The DCS Single Band Booster is used to meet the demands of boosting signals in areas where there is little to no coverage. The boosters that are available with us help with issues such as call clarity and helps boost transmission levels. They are long lasting and the components used are original. These can be used in offices, factories and homes and provide relief to consumers who are in areas of poor connectivity.
Features :
Application : To expand signal coverage or fill signal blind area, where signal is weak or unavailable.
Indoor Applications :
Technical Specifications Model: FT103A
Description | Specifications |
---|---|
Frequency Range (Customers to Choose) | Uplink |
-- | Downlink |
Frequency Bandwidth (3dB Bandwidth) | 60MHz |
Gain | ≥ 65dB |
Automatic gain control (Step Attenuation) | 31dB @ 1dB/ Step |
Auto Gain Control | 20dB Min. |
Output Power(Customers to Choose) | 17~23dBm±2 |
Spurious Emission | ≤ -15dBm/30kHz |
-- | 9kHz~1GHz: ≤ -36dBm/30kHz |
-- | 1GHz~12.75GHz: ≤ -30dBm/30kHz |
Inter-Modulation Attenuation ACPR | ≤ -40dBc / 30kHz (measured under rated output power) |
In-band Ripple | ≤ 3dB |
VSWR | <=2 |
I/O Impedance | 50 Ω |
Noise Figure | ≤ 5dB |
System Delay | ≤ 5μs |
RF Connector(Customers to Choose) | SMA (Female) |
Operating Temperature | Operation: - 10oC ~ + 55oC / Storage: -20°C ~ +60oC |
Power Supply | AC 220V±20%, 50/60HzïAC 220V/ DC9V/9A power adapter |
Dimensions | 110*150*40 (mm) |
Weight | ≤0.5 kg(Net) |
Alarm Monitoring System | Alarm for uplink self-oscillation |
Indication LED | Power supply |
The 3G Single Band Booster picks up the strongest signal from the donor antenna and amplifies it. The amplified signal is then retransmitted to areas where there is weak coverage. Our 3G Single Band Booster is the solution to weak signals that get attenuated or faded in certain areas. It is also easy to install, provides a considerably high gain and requires little to no maintenance.
Features :
Application : To expand signal coverage or fill signal blind area, where signal is weak or unavailable.
Indoor Applications :
Specifications
Description | Specifications |
---|---|
Frequency Range (Customers to Choose) | Uplink |
-- | Downlink |
Frequency Bandwidth (3dB Bandwidth) | 60MHz |
Gain | ≥ 65dB |
Automatic gain control (Step Attenuation) | 31dB @ 1dB/ Step |
Auto Gain Control | 20dB Min. |
Output Power(Customers to Choose) | 17~23dBm±2 |
Spurious Emission | ≤ -15dBm/30kHz |
-- | 9kHz~1GHz: ≤ -36dBm/30kHz |
-- | 1GHz~12.75GHz: ≤ -30dBm/30kHz |
Inter-Modulation Attenuation ACPR | ≤ -40dBc / 30kHz (measured under rated output power) |
In-band Ripple | ≤ 3dB |
VSWR | <=2 |
I/O Impedance | 50 Ω |
Noise Figure | ≤ 5dB |
System Delay | ≤ 5μs |
RF Connector(Customers to Choose) | SMA (Female) |
Operating Temperature | Operation: - 10oC ~ + 55oC / Storage: -20°C ~ +60oC |
Power Supply | AC 220V±20%, 50/60HzAC 220V/ DC9V/9A power adapter |
Dimensions | 110*150*40 (mm) |
Weight | 1 kg(Net) |
Alarm Monitoring System | Alarm for uplink self-oscillation |
Indication LED | Power supply |
The CDMA Single Band Booster is also another effective booster which helps boost network strength. Our booster has two signal ports with a duplex design and is very affordable. It is also very effective in tackling coverage problems and helps boost indoor signals to a great extent. The installation process is very simple and inter-modulation emission can be supressed due to the linear power amplification.
Features :
Application : To expand signal coverage or fill signal blind area, where signal is weak or unavailable.
Indoor Applications :
Specifications
Description | Specifications |
---|---|
Frequency Range (Customers to Choose) | Uplink |
-- | Downlink |
Frequency Bandwidth (3dB Bandwidth) | 25MHz |
Gain | ≥ 65dB |
Automatic gain control (Step Attenuation) | 31dB @ 1dB/ Step |
Auto Gain Control | 20dB Min. |
Output Power(Customers to Choose) | 17~23dBm±2 |
Spurious Emission | ≤ -15dBm/30kHz |
-- | 9kHz~1GHz: ≤ -36dBm/30kHz |
-- | 1GHz~12.75GHz: ≤ -30dBm/30kHz |
Inter-Modulation Attenuation ACPR | ≤ -40dBc / 30kHz (measured under rated output power) |
In-band Ripple | ≤ 3dB |
VSWR | <=2 |
I/O Impedance | 50 Ω |
Noise Figure | ≤ 5dB |
System Delay | ≤ 5μs |
RF Connector(Customers to Choose) | SMA (Female) |
Operating Temperature | Operation: - 10oC ~ + 55oC / Storage: -20oC ~ +60°C |
Power Supply | AC 220V±20%, 50/60HzAC 220V/ DC9V/9A power adapter |
Dimensions | 110*150*40 (mm) |
Weight | ≤0.5 kg(Net) |
Alarm Monitoring System | Alarm for uplink self-oscillation |
Indication LED | Power supply |
Graphical Image 01
Graphical Image 02
The GSM Dual Band Booster (900MHz and 3G 2100) helps boost mobile networks, 3G and LAN networks. When there is any signal fading or attenuation, the booster picks up strong signals, amplifies them and transmits them to boost the signal. It also provides a high signal gain. We supply compact and wireless boosters that are priced at reasonable rates and require little or no effort to install.
Features :
Application : To expand signal coverage or fill signal blind area, where signal is weak or unavailable.
Indoor Applications :
Technical Specification
Description | Specification | |
---|---|---|
Frequency Range (Customers to Choose) | Uplink | |
Downlink | ||
Frequency Bandwidth (3dB Bandwidth) | 25MHz | |
Gain | ≥ 65dB | |
Automatic gain control (Step Attenuation) | ≥30dB @ 1dB/ Step | |
Auto Gain Control | 20dB Min. | |
Output Power(Customers to Choose) | 17 dBm±2 | |
Spurious Emission | ≤ -15dBm/30kHz | |
9kHz~1GHz: ≤ -36dBm/30kHz | ||
1GHz~12.75GHz: ≤ -30dBm/30kHz | ||
Inter-Modulation Attenuation ACPR | ≤ -38dBc / 30kHz (measured under rated output power) | |
In-band Ripple | ≤ 3dB | |
VSWR | <=2 | |
I/O Impedance | 50 Ω | |
Noise Figure | ≤ 5dB | |
System Delay | ≤ 5μs | |
RF Connector(Customers to Choose) | SMA (Female) | |
Operating Temperature | Operation: - 10oC ~ + 55oC / Storage: -20oC ~ +60oC | |
Power Supply | AC 220V±20%, 50/60HzAC 220V/ DC9V/9A power adapter | |
Dimensions | 195*140*29 (mm) | |
Weight | 1 kg(Net) | |
Alarm Monitoring System | Alarm for uplink self-oscillation | |
Indication LED | Power supply |
The Dual Band Booster (1800MHz & 3G 2100) picks up the strongest signals from those areas that have high coverage and amplifies it. The amplified signal is then retransmitted in order to boost the signal in areas that lack coverage. We provide Dual Band Boosters (1800MHz & 3G 2100) that are the strongest and most reliable to our client base. They are the most efficient in the market due to its wireless feature and strong signal output.
Features :
Application : To expand signal coverage or fill signal blind area, where signal is weak or unavailable.
Indoor Applications :
Technical Specification
Description | Specification | |
---|---|---|
Frequency Range (Customers to Choose) | Uplink | |
Downlink | ||
Frequency Bandwidth (3dB Bandwidth) | 25MHz | |
Gain | ≥ 65dB | |
Automatic gain control (Step Attenuation) | ≥30dB @ 1dB/ Step | |
Auto Gain Control | 20dB Min. | |
Output Power(Customers to Choose) | 17 dBm±2 | |
Spurious Emission | ≤ -15dBm/30kHz | |
9kHz~1GHz: ≤ -36dBm/30kHz | ||
1GHz~12.75GHz: ≤ -30dBm/30kHz | ||
Inter-Modulation Attenuation ACPR | ≤ -38dBc / 30kHz (measured under rated output power) | |
In-band Ripple | ≤ 3dB | |
VSWR | <=2 | |
I/O Impedance | 50 Ω | |
Noise Figure | ≤ 5dB | |
System Delay | ≤ 5μs | |
RF Connector(Customers to Choose) | SMA (Female) | |
Operating Temperature | Operation: - 10oC ~ + 55oC / Storage: -20oC ~ +60oC | |
Power Supply | AC 220V±20%, 50/60HzAC 220V/ DC9V/9A power adapter | |
Dimensions | 195*140*29 (mm) | |
Weight | 1 kg(Net) | |
Alarm Monitoring System | Alarm for uplink self-oscillation | |
Indication LED | Power supply |
The Digital GSM Single Band Booster is used for a moderate frequency range and boosts cellular network signals by avoiding any signal fading or attenuation due to obstacles. It helps pick up strong signals, amplifies them and transmits it in the opposite direction. We provide these boosters with a high gain and maximum efficiency. They do not get damaged by an external conditions and works great in indoor environments.
Features :
Application : To expand signal coverage or fill signal blind area, where signal is weak or unavailable.
Indoor Applications :
Specifications
Description | Specifications | |
---|---|---|
Frequency Range (Customers to Choose) | Uplink | |
Downlink | ||
Frequency Bandwidth (3dB Bandwidth) | 25MHz | |
Gain | ≥ 65dB | |
Automatic gain control (Step Attenuation) | ≥30dB @ 1dB/ Step | |
Auto Gain Control | 20dB Min. | |
Output Power(Customers to Choose) | 17 dBm±2 | |
Spurious Emission | ≤ -15dBm/30kHz | |
9kHz~1GHz: ≤ -36dBm/30kHz | ||
1GHz~12.75GHz: ≤ -30dBm/30kHz | ||
Inter-Modulation Attenuation ACPR | ≤ -38dBc / 30kHz (measured under rated output power) | |
In-band Ripple | ≤ 3dB | |
VSWR | <=2 | |
I/O Impedance | 50 Ω | |
Noise Figure | ≤ 5dB | |
System Delay | ≤ 5μs | |
RF Connector(Customers to Choose) | SMA (Female) | |
Operating Temperature | Operation: - 10oC ~ + 55oC / Storage: -20oC ~ +60oC | |
Power Supply | AC 220V±20%, 50/60HzAC 220V/ DC9V/9A power adapter | |
Dimensions | 195*140*29 (mm) | |
Weight | 1 kg(Net) | |
Alarm Monitoring System | Alarm for uplink self-oscillation | |
Indication LED | Power supply |
yes
The Cell Phone Coaxial Cable is used for cell phone signal boosters and repeaters. We supply top grade coaxial cables that are widely used in radio transmission and other communication systems. Our Cell Phone Coaxial Cables have an aluminium foil coating that acts as a shield. These work very effectively in high frequency ranges. These cables can be customized to your choice of cable colour, windings etc. to suit your needs.
Features :
Specifications
Inner conductor |
Bare copper/Copper clad steel |
Φ1.07 mm |
Dielectric
|
Foam /Solid PE |
Φ3.0±0.02 mm |
Shield |
Bonded aluminium foil |
Φ3.2 mm |
Outer conductor |
Tinned copper braid |
Φ3.6 mm |
Shield coverage
|
-- |
85% |
Sheath |
PVC/PE |
Φ5.4 mm |
Electrical and Mechanical Characteristics
Impedance |
50±3 Ohm
|
---|---|
Nominal capacitance |
82 pF/m |
Velocity of propagation
|
81%
|
Insulation resistance
|
>5000M ohm.Km
|
Inner conductor resistance
|
19.2(65.2) Ohm/Km
|
Outer conductor resistance
|
16.3 Ohm/Km
|
Operating temperature range
|
-40°C - +85 °C
|
Min.bending radius
|
27 mm
|
The GSM Dual Band Booster (900MHz & DCS 1800MHz) works very effectively in the frequency range of 900 MHz. It is used to boost cellular network, LAN and GSM networks. We provide easy to install GSM dual band boosters that provide the desired output in a very short interval of time. They are simple, yet practical and are one of the best boosters in the market.
Features :
Application : To expand signal coverage or fill signal blind area, where signal is weak or unavailable.
Indoor Applications :
Technical Specification
Description | Specification | |
---|---|---|
Frequency Range (Customers to Choose) | Uplink | |
Downlink | ||
Frequency Bandwidth (3dB Bandwidth) | 25MHz | |
Gain | ≥ 65dB | |
Automatic gain control (Step Attenuation) | ≥30dB @ 1dB/ Step | |
Auto Gain Control | 20dB Min. | |
Output Power(Customers to Choose) | 17 dBm±2 | |
Spurious Emission | ≤ -15dBm/30kHz | |
9kHz~1GHz: ≤ -36dBm/30kHz | ||
1GHz~12.75GHz: ≤ -30dBm/30kHz | ||
Inter-Modulation Attenuation ACPR | ≤ -38dBc / 30kHz (measured under rated output power) | |
In-band Ripple | ≤ 3dB | |
VSWR | <=2 | |
I/O Impedance | 50 Ω | |
Noise Figure | ≤ 5dB | |
System Delay | ≤ 5μs | |
RF Connector(Customers to Choose) | SMA (Female) | |
Operating Temperature | Operation: - 10oC ~ + 55oC / Storage: -20oC ~ +60oC | |
Power Supply | AC 220V±20%, 50/60HzAC 220V/ DC9V/9A power adapter | |
Dimensions | 195*140*29 (mm) | |
Weight | 1 kg(Net) | |
Alarm Monitoring System | Alarm for uplink self-oscillation | |
Indication LED | Power supply |