fuel instruments & engineers pvt ltd.

Kolhapur, Maharashtra

Loading Accuracy as high as  +  1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of  materials Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Easy change from plain to threaded and screwed specimens.  Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety devices. Fully enclosed and protected pendulum.

Loading Accuracy as high as  +  1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of  materials Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Easy change from plain to threaded and screwed specimens.  Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety devices. Fully enclosed and protected pendulum.   Application :       FIE Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted.     Principal of Operation :       Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.     Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen.     Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.       Machine consists of :       Straining Unit        This consists of a hydraulic cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross-head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured be reveling the cylinder and ram of of any possible side loading by the provision of ball seatings.     An elongation scale with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.     Tension test is conducted by gripping the test specimen between the upper and lower cross-heads,     Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.     The lower cross-head can be raised or lowered rapidly by operating the screwed columns thus facilitating ease of fixing of the test specimen. Control Panel :        The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder.     Power Pack :   The power pack generates the maximum pressure of 200 kgf/cm 2  the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.     Hydraulic Controls :       Hand operates wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of piston movement. Control by this valve allows extensometer readings to be taken.     Load Indicator System :   This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded.     Pendulum Dynamometer :    This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurised oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer  system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.     Autographic Continuous Roll Load-Elongation Recorder :   This unit is of the pen and drum type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ration of either 1:5 or 1:10.     Accuracy & Calibration :         AII FIE Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during  every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in  accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828 : (Part 1) : 1991.     FIE Universal Testing Machines comply with Grade "A" of BS : 1610 : Part 1:1992 and class 1 of IS 1828 : (Part1) : 1991 An accuracy of  +  1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.

Loading Accuracy as high as  +  1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of  materials Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Easy change from plain to threaded and screwed specimens.  Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety devices.   Fully enclosed and protected pendulum.   Application :       FIE Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted.     Principal of Operation :   Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.     Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen.     Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.     Machine consists of :        Straining Unit        This consists of a hydraulic cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross-head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured be reveling the cylinder and ram of of any possible side loading by the provision of ball seatings.     An elongation scale with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.     Tension test is conducted by gripping the test specimen between the upper and lower cross-heads.     Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.     The lower cross-head can be raised or lowered rapidly by operating the screwed columns thus facilitating ease of fixing of the test specimen.         Control Panel :    The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder. Power Pack :   The power pack generates the maximum pressure of 200 kgf/cm 2  the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth. Hydraulic Controls :   Hand operates wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of piston movement. Control by this valve allows extensometer readings to be taken.     Load Indicator System :   This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded.     Pendulum Dynamometer :    This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurised oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer  system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.     Autographic Continuous Roll Load-Elongation Recorder :       This unit is of the pen and drum type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ration of either 1:5 or 1:10.     Accuracy & Calibration :     AII FIE Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during  every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in  accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828 : (Part 1) : 1991.     FIE Universal Testing Machines comply with Grade "A" of BS : 1610 : Part 1:1992 and class 1 of IS 1828 : (Part1) : 1991 An accuracy of  +  1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.    Special Accessories : •  Load Stabilizer •  Printer •  Plotter •  Brinell Test Attachment •  Electronic Extensometer  • Piston Movement Resolution of 0.01 mm  • Electronic Load Pacer • Shear Test Attachment  •  Software Packages •  Mechanical Extensometer      A wide range accessories offered on request at additional cost.   Installation :   It is recommended that machines be erected on a foundation. Details on foundation can be given on request    

Technical Description :       'FIE' Universal Testing Machine series Unitek 9400 are microprocessor based electromechanical machines with Servo drive designed for testing & studying mechanical behavior of various materials like metals, polymers, elastomers etc. These machines offer good built in features to offer excellent stand alone performance for standard tests & great flexibility for complex analysis.  These machines confirm to IS, BS & ASTM standards. Main Features       Precision DC servo motor & Drive with ball lead screw given an advanced drive systems with 1 to 1000 standard speed range.     Provision for load cell inchargiability & thereby automatic selection of load full scale & units (kN or N).      Facility for mounting different load cells & clamping devices to suit different tests & materials such as thin wires, metalsheets, fiberglass, leathers, springs, cardboards etc     Built-in parallel interface to connect Dot matrix printer for data & curve print-out. Safety interlock for overload & limit switch sensing to ensure protection during test.     Universal applications in R & D, education, quality control & production for test like tensile, compression, bending etc.     Electronic Control Panel (Series Universal 2001)       Microprocessor based panel incorporating state of art technology with following features.     Front panel membrane type keyboard for machine operation with numeric keys for data entry.     7 sigment display.     Auto load cell identification.     Data entry with numeric keyboard of test parameters including speeds, rupture % peak,   preload, modulus data, test data, specimen data etc.     20 input data set storage, 50 result storage. maintains data & results during power off.     Batch test facility for generating batch & statistics result. Using same data set.     Optional remote to ease specimen loading/unloading.     RS232C serial port. Optional windows based software a for.........     On line graph on PC.- Data analysis, statistics with point tracing, superimposing graphs to compare with standard, zooming graph etc.     Printer port for printer interface with       Graph & result printout.     Test certificate printout.     Batch certificate printout.     Simple statistics printout.     Optional accessories         FIE offers wide range of optional accessories along with Unitek 9400 machines to cover almost every material test requirement.     Loaded Cells       FIE offers Strain gauge type Universal load cells in different capacities in the following nominal ranges :     100N, 250N, 500N, 1 kN, 2.5 kN, 5 kN, 10kN, 25kN, 50kN, 100kN Load cells of different capacity can be offered as per customers equirements.     Grip & Clamping Device         A wide range of grips are available from FIE such as      Wedge type grips for flat & round specmens with different inserts.     Vise type grips.     Single threaded grips     Pneumatic grips     Compression plates     Bending fixtures     Shearing attachment     Extenso   meters  :       Electronic analogue extensometers are offered along with interface card on the control panel to measure extension       Model 1 : EE2 - STRAIN GAUGE ( with 1 micron resolution )     Model2  : LTE800 - DIGITAL TYPE ( with l Omicronresolution )     SERIAL COMMUNICATION & SOFTWARE PACKAGE ON PC       The Universal 2001 series control panel can be hoked to any PC using RS-232 communication port. FIE offers different window based software packages with real time graph on PC to enable the user to effective evaluate different parameters.     The features include :       Real time graph, User friendly software.     Extensive graphics on screen for curve plotting, magnification and zooming.     Software features includes Graph comparison, point tracing facility. Different units selection   for load & displacement.     Statistical evaluation with water fall dig., Mean deviation, frequency distribution, Skew dig.,   Histogram. Also calculates    max. value, min. value, mean value, Variance, Standard Deviation. ( Other statistical parameters on request ). Selectable batch & statistical printouts.     Evaluation of wide range of user selectable parameters such as % elongation, % reduction in   area, young's modules, yield stress, proof stress etc.     Software packages for Shear, Bend, Torsion, Rubber, Testing etc.     Customer built application software to suit customer requirements.

Features       The FIE Compression Testing Machine Incorporates design features to enable high accuracy testing with economy, speed & versatility.       Loading Accuracy as high as  +  1%     Straining at variable speeds to suit a wide range of materials.     Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials     Motor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen.     High reading accuracy due to large size and design of dial.     Wide range of standard and special accessories, including load stabilizer.     Large effective clearance between columns enables testing of standards specimens as well as structures.     Simple controls for easy of operation.     Robust staining frame of an extremely rigid construction.     Safe operation ensured be means of safety devices.     Application :       FIE Compression Testing Machine is designed for test materials under compression bending, transverse and shear loads. Hardness test on metals can also be conducted.         Principal of Operation :       Operation of the machines is by hydraulic transmission of load from the test specimen to separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.     Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The piston of the dynamometer is constantly rotated to eliminate friction. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen.     Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.         Machine consists of :          Straining Unit      This consists of a hydraulmic cylinder and a table coupled with the ram of hydraulic cylinder, mounted on robust base. The cylinder and the ram are individually lapped to eliminate friction. The cross-head is connected to two screwed columns and is driven by a motor, for rapid adjustment of test height.     An elongation scale with a minimum graduation of 1.0 mm, is provided to measure the deformation of the specimen.     Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.     Control Panel :      The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder.     Power Pack :     The power pack generates the maximum pressure of 200 kgf/cm 2  the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.     Hydraulic Controls :     Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of table movement.     Load Indicator System :     This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded.     Pendulum Dynamometer :      This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurised oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer  system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.     Autographic Continuous Roll Load-Elongation Recorder :     This unit is of the pen and drum type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ration of either 1:5 or 1:10. A continuous roll of graph paper is stored inside the drum and is easily replaced.     Accuracy & Calibration :       AII FIE Compression Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828.  An accuracy of  +  1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.    

  Fie  Erichsen Testing Machines  is designed to carry out Erichsen Cupping test on metals. Quick clamping and manual operation facilitates faster and trouble free working of the machine.