Jalandhar, Punjab, India
Verified
Add Review
Our Products
The company has firmly cemented its position in the domestic markets as a Manufacturer and Supplier of Graphite Water Based Die Coatings, which are marketed under the EFFKOTE brand. The Graphite Water Based Die Coatings have lubricating properties, and they are used for gravity and low-pressure die casting of a wide range of materials. Metals like copper, aluminum, and zinc as well as ferrous metals, and alloys like brass can casted using Graphite Water Based Die Coatings.
The Natural Graphite Flakes, offered by the company, have a fixed carbon content that varies between 40-80%. The mesh sizes for the Natural Graphite Flakes are 50, 70, 100, 120, and 150, with the purity and quality of the range being ensured. The company has emerged as a prominent Manufacturer and Supplier of Natural Graphite Flakes.
We have developed KOREKOTE 40 F RFU brand Graphite Alcohol Based Coatings, which are a graphite thinner base mold and core dressing/coating. As a Manufacturer and Supplier of Graphite Alcohol Based Coatings, we offer a range that is required by ferrous and non-ferrous foundries. The Graphite Alcohol Based Coatings can help in the production of castings with superior and clean surface finish without defects like sand wash, sand burn-on, sand fusion, and metal penetration etc. Our mold and core coatings are premixed with binders and suspension agents in order to give better bonding and uniform coating on sand surface. Suspension properties are excellent which ensure uniform coat of wash during application. Our Graphite Alcohol Based Coatings are based on selected refractory materials, which ensure that there is no metal and mold reaction during solidification. The Graphite Alcohol Based Coatings are blended with binder and suspension agents in such a way that they are readily mixed with carrier to form a homogeneous mix with good suspension properties. The Graphite Alcohol Based Coatings do not have tendency to ferment. In case of alcohol base coatings, after application, the surface of the mold/core is ignited for final drying.
Typical Properties :
Application : Product is used for all green sand, CO2 set and resin bonded sand moulds and cores. Suitable for spraying, brushing types of applications. Product is specially formulated to ensure high refractory, non wettable and non reactive coating layer with optimum application properties to ensure an excellent casting finish.
Advantages :
The company is a major Manufacturer and Supplier of Graphite Water Based Coatings. Korekote 13 GWB is Graphite Water Based Coating available in paste or ready-to-use forms. Based on high quality graphite, the Graphite Water Based Coatings impart excellent thixotropic properties resulting in superior suspension characteristics and grants excellent performance at high temperatures. Clean and smooth surface finish of casting is obtained by the use of Graphite Water Based Coatings.
Typical Properties
Application : Product is used for all Grey Cast Iron and can be applied on Cores and Moulds of Cold-Box, Hot-Box and shell resin process. Suitable for Dipping as supplied. Drying the coating has to be conducted in an oven at 150-180 degree for 1 hour, when a homogenous and dense coating film is formed.
Advantages : Less preparation time and fast deposit of the coating on the cores. As the product is supplied in ready for use form, thorough mixing of all the ingredients takes place at the time of manufacture. Product gives a complete and uniform coverage, which ensures a good casting finish, free from veining, fining, fusion and penetration and hence lowers the casting cleaning costs.
Storage and Handling : The product should be stored at a room temperature under roof and away from direct sunlight and moisture. Use of safety gears and gadgets is a must while handling the above product. Shelf life: 4 months from the date of manufacture. Standard Packing 25 kg in poly carboys.
Directions for Use : Korekote 13 GWB should be mixed with a pneumatic or an electric mixed. Material should be mixed thoroughly in its container before diluting with water. Ideally hardness should be below 90 ppm. Korekote 13 GWB must be torch or oven dried prior do casting.
We have come up as a major Manufacturer and Supplier of Zircon Water Based Coatings. The Effcol 100 ZWB is a zircon and water based coating that is offered in a paste or ready-to-use form. Based on high quality zircon, the Zircon Water Based Coatings impart excellent thixotropic properties, resulting in superior suspension characteristics. The Zircon Water Based Coatings grant excellent performance at high temperatures, and a clean and smooth surface finish of casting is obtained.
Typical Properties :
Application : Product is used for all Cast Iron and Steel grades as well as for Aluminum and can be applied on Cores and Moulds of Cold-Box, Hot-Box and shell resin process. Suitable for Brushing as it is, and optionally dipping/spraying after slight dilution. Drying the coating has to be conducted in an oven at 150-180 degree for 1 hour, when a homogenous and dense coating film is formed.
Advantages : Less preparation time and fast deposit of the coating on the cores. As the product is supplied in ready for use form, thorough mixing of all the ingredients takes place at the time of manufacture. Product gives a complete and uniform coverage, which ensures a good casting finish, free from veining, fining, fusion and penetration and hence lowers the casting cleaning costs.
Storage and Handling : The product should be stored at a room temperature under roof and away from direct sunlight and moisture. Use of safety gears and gadgets is a must while handling the above product.
Shelf life : 4 months from the date of manufacture.
Standard Packing : 40 kg in poly carboys. Directions for Use Effcol 100 ZWB should be mixed with a pneumatic or an electric mixed. Material should be mixed thoroughly in its container before diluting with water. Ideally hardness should be below 90 ppm. Effcol 100 ZWB is designed to be diluted by the customer to its proper specification according application. Effcol 100 ZWB must be torch or oven dried prior do casting.
Effcol 656 ZTB is a solvent-based zircon coating for spraying and brushing applications. The Zircon Alcohol Based Coatings are ready-to-use dressings having excellent suspension and coverage properties, which are suitable for casting high temperature alloys like steel and cast-iron. The company is a major Manufacturer and Supplier of Zircon Alcohol Based Coatings, which have numerous applications and advantages.
Typical Properties :
Application Viscosity : 14-16 seconds as per Ford B4 Cup Application Product is used for all green sand, CO2 set and resin bonded sand moulds and cores. Suitable for spraying, brushing
Types of Applications : Product is specially formulated to ensure high refractory, non wettable and non reactive coating layer with optimum application properties to ensure an excellent casting finish.
Advantages : Imparts excellent casting finish, free from sand burns and fusions. Coating inclusions are not caused. Product is easily re-mixable due to better suspension properties and gives uniform coverage, which ensure a good casting finish, free from veining, fins, fusion and penetration and hence lowers the casting cleaning costs.
Storage and Handling : The product should be stored at a room temperature under roof and away from direct sunlight and moisture. Use of safety gears and gadgets is a must while handling the above product. Shell Life 4 months from the date of manufacture.
Standard Packing : 30-35 kg in poly carboys.
Directions for Use : Effcol 656 ZTB should be mixed thoroughly before use. We recommend the use of an explosion-proof, motor-driven mixer. Effcol 656 ZTB is shipped as slurry produced to approximately specific gravity of 1.60 grams/cc. If necessary, the specific gravity can be reduced by reducing the Effcol 640 ZTB with FA-Thinner.
Caution : Solvent is highly flammable.
