Water should be collected from the source which should be well protected, available easily, un-contaminated. Sources can be anything viz. Bore well water Line, Closed Ring Well, Municipal Supply Line or Other source where treatment is possible.

Water is transferred to Raw Water Storage Tanks using proper pumping system and un-contaminating piping work. Either Submersible Pump or surface mounted Centrifugal pump can be used with good quality UPVC or CPVC or SS piping can be used for this application.

• 1. Raw Water feed Pump

• 2. Chlorine Dosing system

• 3. Multi Media Filtration for Coarse filtration

• 4. Activated Carbon Filtration

• 5. Water Softening / Anti Scalent Treatment Process

• 6. Reverse Osmosis Or Nano / Ultra Filtration

• 7. Purified Water Storage in Stainless Steel tank

• 8. Transfer Pump in stainless steel

• 9. Micron Cartridge Filtration (0.2 Micron)

• 10.UV Sterilization

• 11.Ozone Disinfection

Raw water is chlorinated or Ozonated to oxidize the organic impurities (kill bacteria and virus). This water is passed through Multi Media Filter with the help of Feed pump of suitable capacity to remove suspended impurities followed by Activated Carbon Filter to remove excess chlorine (de-chlorination), odour, colour and turbidity due to colloidal suspended impurities and organic impurities.

De chlorinated water is then dosed with Anti Scalent Solution to avoid scale formation on the membrane or passed through Softener to remove hardness. Softened water is further passed through 10-micron cartridge filter to remove micron particles to avoid clogging of the RO membrane and to improve the silt density index. Water further passed though RO Unit which is complete with High Pressure Pump, Membranes with Pressure tubes, Electrical control panel and wet panel, piping with valves and all the required accessories viz., pressure switch, solenoid valve etc. Reverse Osmosis unit will reduce the dissolved Salts up to 95% of the In feed TDS. Treated water from RO unit will be stored into SS tank.

This treated water is then passed through 0.2 micron cartridge filter before it is taken for the filling. Ozonator unit producing ozone gas is installed in series at the outlet of UV System to provide residual effect of ozone to the water.

Purified Water is tested using IN HOUSE Water Testing laboratory Where Chemical and Micro Biologically Water is tested for Chemical and Micro Biological parameters. For this, a complete full fledge Water Testing CHEMICAL and MICRO BIOLOGICAL Lab is required. However, water is also tested for Pesticide and Radio-nuclear parameters in outside Bureau of Indian standards approved laboratory.

FRIENDS AQUA EQUIPMENTS carries a complete range of Micron Filters housing in variety of colours and designs.

Micron Filters Housing are available in different modes of constructions, viz., Poly Propylene, HDPE, SS 304 and SS 316.

PP housings are available in to 1 BSP Female Threading sizes. Mounting brackets in SS 304 and fittings specially made for easy maintenance and handling.

SS 304 / 316 Filter Housings are available with Threading or Dairy End Fittings or TC Fittings. These Housings are available with Leg Supports.

Filters are either used alone or installed in series to obtain better results and optimum life.

We also provide SS housing for some special applications like Pharmaceutical and Food & Beverage use (Code & Cartridge and Housings)

FRIENDS AQUA EQUIPMENTS also makes a complete line of filter cartridge having varied porosity from 100 microns to 0.2 microns in great variety viz. Poly Propylene Wound and Spun, Melt Blown Spun, Resin bonded, Pleated and Activated Carbon Cartridges.

FRIENDS AQUA offers wide series of multimedia filters for removal of suspended solids and heavy metals. Filters are available FRP (Fibre Reinforced Polymer), Mild Steel and Stainless Steel.

Pressure Sand Filter is an ideal solution for the systems with high sediment, silt, sand, and turbidity. Our unique design ensures the maximum utilization of the surface area, lesser pressure drop across the pressure bed and effective elimination of the impurities. The strength, stability and micro-porous character of filtration media make sand filter suitable for virtually every application in the water treatment industry.

Activated carbon is the most common method of treatment for de-chlorination and removal of taste and odour from water, through adsorption. Adsorption is directly related to the surface area of the media.

Iron removal filter is processed catalytic filtration unit where the raw water passes through the layer of compressed air, processed catalyst & quartz filter media respectively. The dissolved ferrous iron salts are converted into insoluble ferric salt and precipitated over the filter bed and then the iron free filtered water comes out.

FRIENDS AQUA offers Bromide removal Filters for various capacity ranging from 10 M3/hr upto 250 M3/hr. Water containing Bromide when ozonated, produces Bromate which is carcinogenic. The level of bromate is allowed upto 20 ppb in Drinking Water. However, FRIENDS AQUA offers systems to reduce Bromide from water to avoid Bromate transformation post Ozonation. The removal is possible up to 5 ppb level.

Manganese produces a brownish colour in laundered clothing, leaves black particles on fixtures and as with iron, affects the taste of beverages, including coffee and tea. FRIENDS AQUA specializes in manganese removal systems to help water treatment plants deal with these problems.

1. Place of Origin: Mumbai, Maharashtra (INDIA)2. Brand Name: FRIENDS AQUA3. Condition: New4. After-sales Service Provided: YES5. Product name: Industrial Water Filter6. Type: Water Filter Parts7. Certificate: ISO90018. Use: Water Pre-filtration9. Material: 100% Pure Polypropylene; PVDF; PES; N610.OD: 2.5"11.Length: 10'/20"12.ID: 28 MM13.Micron Rate: 0.22, 0.45, 1, 5, 10, 25, 50, 75, 100, 150 micron

Grey Water is wastewater, which is produced from domestic activities like, clothes laundry, bathing and washing dishes. By using the Grey Water Treatment Plant one can recycle this waste water for landscape irrigation and flushing purposes. As a result of using these Grey Water Treatment Plants, you can reduce usage of freshwater.

Grey water can replace fresh water in many instances, saving money and increasing the effective water supply in regions where irrigation is needed.

Grey water use greatly extends the useful life and capacity of septic systems. For municipal treatment systems, decreased wastewater flow means higher treatment effectiveness and lower costs.

For sites with slow soil percolation or other problems, a grey water system can be a partial or complete substitute for a very costly, over-engineered system.

Less energy and chemicals are used due to the reduced amount of both freshwater and wastewater that needs pumping and treatment.

1. Easy installation

2. User-friendly consoles

3. Better effluent quality

4. Minimal maintenance

5. Consistent performance

6. Low power consumption

FRIENDS AQUA offers industrial reverse osmosis units with same configuration as of commercial range reverse osmosis, but with higher Flow Rates from 2000 LPH to 25000 LPH and more.

These units are also available in complete SS construction for long life use.

FRIENDS AQUA Offers commercial reverse osmosis Units which consists of 6 stages of Water Purification using Multi Media Filter unit, Activated Carbon Filter unit, Water Softening of Anti Scalent Dosing System, 5 Micron Cartridge Filter unit with RO Membrane purification through 0.0001 micron rating Membrane Filter and Post purification of UV Sterilization.

Systems are available in 100 LPH, 200 LPH, 500 LPH and more capacities with multiple of 250 LPH thereafter. (750/1000/1250.etc) Available up to 5000 LPH capacity in this range (Systems are available without RO)

Water purified using the System is free suspended impurities, Organic impurities, all unwanted salts, Heavy Metals, bacteria and virus, Pesticides etc. etc. (Widely used in for Bore well (Heavy salts) water applications.).

FRIENDS AQUA offers commercial range of Water Purification Systems which are widely used in for Hotels, Hospitals and offices etc. for purification of Water having less Salts (municipal water). These units are consists of Micron Bag and Cartridge Filter unit for removal of suspended impurities, Activated carbon cartridge Filter unit for removal of organic impurities and Ultra Violet Sterilization System of eliminate bacteria and virus. Used widely as a Point of Use application, these units are available in 200 LPH, 500 LPH, 1000 LPH, 1500 LPH and 2000 LPH capacities.

FRIENDS AQUA Offers Domestic Reverse osmosis Units which consists of 5-6 stages of Water Purification using Pre Micron, Activated carbon Granular and Activated carbon Block cartridge filtration, RO Membrane purification through 0.0001 micron rating Membrane Filter and Post Carbon for colour removal and taste improvement.

Water softening systems are available in 10 LPH, 20 LPH and 50 LPH capacities. Water purified using the System is free from suspended impurities, Organic impurities, all unwanted salts, Heavy Metals, bacteria and virus, Pesticides etc. etc. (Widely used in for Bore well (Heavy salts) water applications)

FRIENDS AQUA offers an effectual range of Effluent Treatment Plants for recycling of wastewater to reduce water demand. The comprehensive treatment solution works at various levels and involves various physical, chemical, biological and membrane processes. FRIENDS AQUA also provides effluent treatment solutions for various types of industrial waste water. Customized systems to suit the wide variety of effluents and to maintain efficiency are provided to industries. These systems include physic-chemical treatment, biological treatment, tertiary treatment and membrane separation process to achieve the zero-discharge standards laid by statutory authority. We provide innovative and economical systems for waste from industries like chemicals, drugs, pharmaceutical, refineries, dairy, ready mix plants & textile etc.

1. Screening/ Grit chamber: To remove floatable matter and sand, grit, stones in raw effluent.
2. Oil & grease trap: To remove floatable oil and grease from raw effluent.
3. Primary treatment: Includes chemical treatment (coagulation, flocculation, neutralization) and solid-liquid separation for removal of suspended solids.
4. Secondary Treatment: Includes biological treatment for reduction of BOD/COD and solid-liquid separation. Biological treatment can be aerobic or anaerobic depends on quality of raw effluent. Aerobic- ASP (Activated Sludge Process), MBBR/FAB (Moving Bed Bioreactor/ Fluidized Aerated Bioreactor), SAFF (Submerged Aerated Fixed Film Bioreactor), MBR (Membrane Bioreactor) Anaerobic- UASB (Up-flow anaerobic Sludge Blanket Reactor)
5. Tertiary treatment: Sand and carbon filtration for removal of suspended solids and organic material. Ultra-filtration and Reverse Osmosis are the advanced technologies to be implemented for zero-discharge system.

We are leading names in the field of offering competitive solutions for Ultra filtration systems. These are systems based on separation process using membranes having pore sizes in range of 0.1 to 0.001 micron and provide assistance in removing colloidal materials, high molecular-weight substances as well as organic & inorganic polymeric molecules. The Ultra filtration membranes used in these systems have flux varying between 50 and 200 GFD at operating pressure of about 50 psig.

In the filtration process, Ultra-Filtration (UF) utilizes trans-membrane pressure differential for separating particles as per molecular weights. The raw water particles are smaller than pore of UF membrane get permeate and particles larger than UF membrane pore size get separated as concentrate under applied pressure.

1. It is asymmetric semi-permeable membrane made using high molecular material

2. The hollow fiber tubes are covered by micro-pores that allow solutions flowing in/out the membranes under influence of pressure

3. UF membranes have pore sizes from 0.1 to 0.005 m for different applications

4. Normally, this process is utilized in removing-

- High molecular-weight substances

- Colloidal materials

- Bacteria

- Organic/inorganic polymeric molecules

The noted advantages of UF Filtration membranes include:

1. Require minimum pumping energy, thus providing saving on energy

2. Offering chemical resistance over wide PH range

3. Easy to operate & maintain with low investment costs

4. Recovery ratio up to 98%

1. Some of the industries these are used in include:

2. Surface Water Clarification

3. RO Pre-Treatment

4. Waste Water Treatment

GUAPURO offers complete Turnkey Swimming Pool Project as well as offers Pool Filters and accessories. Aguapuro have developed standard compact filters for swimming pools. Advantage of these type of filter is, they can be repeatedly used after backwash.

Turnkey Project covers complete Designing, Civil Construction, Plumbing and Filtration Plant supply and Pool operation on completion and Handover of the Pool.

Aguapuro Equipments offer various products required for Swimming Pool along with Filtration Plant, List of items are as follows :

1. Pool Filters FRP / MS / SS

2. Re- Circulation Pumps

3. Hair Catcher unit Dosing Systems

4. Under Water Lights

5. Overflow Gratings

6. Pool Cleaning Brush

7. Pool Chemicals

We are offering highly durable Water Softening Plant that is used for removing hard salts and providing suitable water. The water gets hard when it contains more of calcium and magnesium ions. Softening is the ion exchange process, which is done through resin, is preferred over others plant as it is one of the best possible method for removing from water. Here, undesirable ions are exchanged for ions that are more required. The process comprises of passing the unrefined water containing hardness through a bed of cation resin in sodium form. The hardness ions Ca & Mg are then up by resin and in exchange, the sodium ions are turned down from the resin. This is the service cycle, where the hard water is being softened in this plant.

1. Capacity (m3/hr) : 1000

2. Material : Alloy Steel

3. Working pressure : 0.15-0.5 Mpa

FRIENDS AQUA offers complete solution for Sewage Water Treatment Plants and Recycle. The Sewage from the residential and commercial buildings is treated for reduction in BOD, COD & TSS in order to comply with the pollution control board standards for disposal, gardening, flushing and other non-potable purposes.

The sewage treatment plants are based on the Latest FAB (Floating Aerobic Biomedia) or SAFF (Submerged Aerobic Fixed Film) treatment followed by clarification by a tube settler. Lime is dosed in for suppression of foaming tendencies. The clarified water is then further filtered in a Multi media Sand Filter after dosing of coagulant (alum) for removal of unsettled suspended impurities followed by Sand Filter and Activated Carbon Filter for removal of organics. The filtered water from ACF is then chlorinated & stored in the treated water tank.

These sewage treatment plants are available in RCC constructed designs for commercial and residential buildings as well as Mild Steel FRP Lined and Fibre constructed tanks for easy installation and commissioning.

Sewage treatment systems are available from 50 M3 per day to 1000 M3/day and more.Water thus obtained can be used for gardening, flushing, car washing, etc.

Systems are offered for achieving zero discharge using UF and RO systems further to treat sewage.

Desalination Plant is used for precise pretreatment process for removal of salts and minerals from the seawater using Reverse Osmosis.

We have gained expertise in offering high quality Desalination Plant to the esteemed customers, as per their requirements. These plants are fabricated using genuine quality raw material, procured from some of the most trusted sources. Moreover, we check these plants on certain well-defined parameters to gauge their flawless nature.

The OS Series steel Coalescing Oil Water Separators are designed for applications where a high performance coalescing oil water separator design is desired using coalescing media. The industrial duty OS design has many features such as solids V-hopper, adjustable water weir, integral inlet diffuser, A-36 carbon steel or stainless steel construction and many options to provide engineers, system integrators and end users with convenience and flexibility in oil separator system configuration choices.

Customization & modifications to fit your project needs are offered. Typical performance is 10 ppm or less, 30 micron oil droplet.

Products removed: motor oils, fuels (vehicle/jet), fuel oils, hydraulic fluids, immiscible machining oils, lube oil, transmission fluid, bunker c, DNAPL, LNAPL, vegetable based oils, crude, air compressor lube & other hydrocarbon based derivatives (BTEX etc.). Model sizing is based on the oil/fuel specific gravity, droplet size removal desired and other parameters of the waste stream

Portable chillers use mechanical refrigeration to cool recirculated fluids that support industrial process cooling applications.

2. Portable chillers include an internal pumping system and reservoir system.

3. Portable chillers can be moved between use points as needed.

4. Air-Cooled chillers use indoor ambient air to dissipate the heat from the refrigeration system.

UV sterilizers are a highly effective, reasonably priced, and low maintenance approach to deal with harmful pathogens in your water without the need to use potentially harmful chemicals like chlorine.

FRIENDS AQUA carries a complete range Ultra Violet Sterilization System made of SS 316 designed to disinfect potable drinking water, Process water and wastewater without the use of heat or chemicals.

Our Standard features of UV sterilization system includes individual lamp indicator, ballast, drain, test port etc. while Optional features include wiper system either manual or programmable automatic, UV monitoring, intensity meter.

Our modular design allows for a wide range of flow rate ranging from 200 LPH to 50000 LPH and larger flows can be handled by mainfolding units together.

UV Sterilization systems are also available with Pre Micron Filtration units to avail the best results by avoiding shadow effect.

All of our systems are designed using the state-of-the-art Quartz Technology which gives the best penetration of UV rays through Silica Quartz Jacket and the lamp used is also of hard glass for obtaining more UV output of > 50000 micro watts sec/cm2.

1. chemical free approach - no harmful chemicals added to your water and no harmful bi-products are created

2. effectively kills bacteria, viruses, mold spores, fungi, oocysts and other microbiological contaminants

3. easy to install, operate, and maintain

4. cheaper than other treatment methods like chlorination and ozone

5. excellent price point relative to UV sterilizers of similar quality

Water should be collected from the source which should be well protected, available easily, un-contaminated. Sources can be anything viz. Bore well water Line, Closed Ring Well, Municipal Supply Line or Other source where treatment is possible.

Water is transferred to Raw Water Storage Tanks using proper pumping system and un-contaminating piping work. Either Submersible Pump or surface mounted Centrifugal pump can be used with good quality UPVC or CPVC or SS piping can be used for this application.

• 1. Raw Water feed Pump

• 2. Chlorine Dosing system

• 3. Multi Media Filtration for Coarse filtration

• 4. Activated Carbon Filtration

• 5. Water Softening / Anti Scalent Treatment Process

• 6. Reverse Osmosis Or Nano / Ultra Filtration

• 7. Purified Water Storage in Stainless Steel tank

• 8. Transfer Pump in stainless steel

• 9. Micron Cartridge Filtration (0.2 Micron)

• 10.UV Sterilization

• 11.Ozone Disinfection

Raw water is chlorinated or Ozonated to oxidize the organic impurities (kill bacteria and virus). This water is passed through Multi Media Filter with the help of Feed pump of suitable capacity to remove suspended impurities followed by Activated Carbon Filter to remove excess chlorine (de-chlorination), odour, colour and turbidity due to colloidal suspended impurities and organic impurities.

De chlorinated water is then dosed with Anti Scalent Solution to avoid scale formation on the membrane or passed through Softener to remove hardness. Softened water is further passed through 10-micron cartridge filter to remove micron particles to avoid clogging of the RO membrane and to improve the silt density index. Water further passed though RO Unit which is complete with High Pressure Pump, Membranes with Pressure tubes, Electrical control panel and wet panel, piping with valves and all the required accessories viz., pressure switch, solenoid valve etc. Reverse Osmosis unit will reduce the dissolved Salts up to 95% of the In feed TDS. Treated water from RO unit will be stored into SS tank.

This treated water is then passed through 0.2 micron cartridge filter before it is taken for the filling. Ozonator unit producing ozone gas is installed in series at the outlet of UV System to provide residual effect of ozone to the water.

Purified Water is tested using IN HOUSE Water Testing laboratory Where Chemical and Micro Biologically Water is tested for Chemical and Micro Biological parameters. For this, a complete full fledge Water Testing CHEMICAL and MICRO BIOLOGICAL Lab is required. However, water is also tested for Pesticide and Radio-nuclear parameters in outside Bureau of Indian standards approved laboratory.

FRIENDS AQUA EQUIPMENTS carries a complete range of Micron Filters housing in variety of colours and designs.

Micron Filters Housing are available in different modes of constructions, viz., Poly Propylene, HDPE, SS 304 and SS 316.

PP housings are available in to 1 BSP Female Threading sizes. Mounting brackets in SS 304 and fittings specially made for easy maintenance and handling.

SS 304 / 316 Filter Housings are available with Threading or Dairy End Fittings or TC Fittings. These Housings are available with Leg Supports.

Filters are either used alone or installed in series to obtain better results and optimum life.

We also provide SS housing for some special applications like Pharmaceutical and Food & Beverage use (Code & Cartridge and Housings)

FRIENDS AQUA EQUIPMENTS also makes a complete line of filter cartridge having varied porosity from 100 microns to 0.2 microns in great variety viz. Poly Propylene Wound and Spun, Melt Blown Spun, Resin bonded, Pleated and Activated Carbon Cartridges.

FRIENDS AQUA offers wide series of multimedia filters for removal of suspended solids and heavy metals. Filters are available FRP (Fibre Reinforced Polymer), Mild Steel and Stainless Steel.

Pressure Sand Filter is an ideal solution for the systems with high sediment, silt, sand, and turbidity. Our unique design ensures the maximum utilization of the surface area, lesser pressure drop across the pressure bed and effective elimination of the impurities. The strength, stability and micro-porous character of filtration media make sand filter suitable for virtually every application in the water treatment industry.

Activated carbon is the most common method of treatment for de-chlorination and removal of taste and odour from water, through adsorption. Adsorption is directly related to the surface area of the media.

Iron removal filter is processed catalytic filtration unit where the raw water passes through the layer of compressed air, processed catalyst & quartz filter media respectively. The dissolved ferrous iron salts are converted into insoluble ferric salt and precipitated over the filter bed and then the iron free filtered water comes out.

FRIENDS AQUA offers Bromide removal Filters for various capacity ranging from 10 M3/hr upto 250 M3/hr. Water containing Bromide when ozonated, produces Bromate which is carcinogenic. The level of bromate is allowed upto 20 ppb in Drinking Water. However, FRIENDS AQUA offers systems to reduce Bromide from water to avoid Bromate transformation post Ozonation. The removal is possible up to 5 ppb level.

Manganese produces a brownish colour in laundered clothing, leaves black particles on fixtures and as with iron, affects the taste of beverages, including coffee and tea. FRIENDS AQUA specializes in manganese removal systems to help water treatment plants deal with these problems.

1. Place of Origin: Mumbai, Maharashtra (INDIA)2. Brand Name: FRIENDS AQUA3. Condition: New4. After-sales Service Provided: YES5. Product name: Industrial Water Filter6. Type: Water Filter Parts7. Certificate: ISO90018. Use: Water Pre-filtration9. Material: 100% Pure Polypropylene; PVDF; PES; N610.OD: 2.5"11.Length: 10'/20"12.ID: 28 MM13.Micron Rate: 0.22, 0.45, 1, 5, 10, 25, 50, 75, 100, 150 micron

Grey Water is wastewater, which is produced from domestic activities like, clothes laundry, bathing and washing dishes. By using the Grey Water Treatment Plant one can recycle this waste water for landscape irrigation and flushing purposes. As a result of using these Grey Water Treatment Plants, you can reduce usage of freshwater.

Grey water can replace fresh water in many instances, saving money and increasing the effective water supply in regions where irrigation is needed.

Grey water use greatly extends the useful life and capacity of septic systems. For municipal treatment systems, decreased wastewater flow means higher treatment effectiveness and lower costs.

For sites with slow soil percolation or other problems, a grey water system can be a partial or complete substitute for a very costly, over-engineered system.

Less energy and chemicals are used due to the reduced amount of both freshwater and wastewater that needs pumping and treatment.

1. Easy installation

2. User-friendly consoles

3. Better effluent quality

4. Minimal maintenance

5. Consistent performance

6. Low power consumption

FRIENDS AQUA offers industrial reverse osmosis units with same configuration as of commercial range reverse osmosis, but with higher Flow Rates from 2000 LPH to 25000 LPH and more.

These units are also available in complete SS construction for long life use.

FRIENDS AQUA Offers commercial reverse osmosis Units which consists of 6 stages of Water Purification using Multi Media Filter unit, Activated Carbon Filter unit, Water Softening of Anti Scalent Dosing System, 5 Micron Cartridge Filter unit with RO Membrane purification through 0.0001 micron rating Membrane Filter and Post purification of UV Sterilization.

Systems are available in 100 LPH, 200 LPH, 500 LPH and more capacities with multiple of 250 LPH thereafter. (750/1000/1250.etc) Available up to 5000 LPH capacity in this range (Systems are available without RO)

Water purified using the System is free suspended impurities, Organic impurities, all unwanted salts, Heavy Metals, bacteria and virus, Pesticides etc. etc. (Widely used in for Bore well (Heavy salts) water applications.).

FRIENDS AQUA offers commercial range of Water Purification Systems which are widely used in for Hotels, Hospitals and offices etc. for purification of Water having less Salts (municipal water). These units are consists of Micron Bag and Cartridge Filter unit for removal of suspended impurities, Activated carbon cartridge Filter unit for removal of organic impurities and Ultra Violet Sterilization System of eliminate bacteria and virus. Used widely as a Point of Use application, these units are available in 200 LPH, 500 LPH, 1000 LPH, 1500 LPH and 2000 LPH capacities.

FRIENDS AQUA Offers Domestic Reverse osmosis Units which consists of 5-6 stages of Water Purification using Pre Micron, Activated carbon Granular and Activated carbon Block cartridge filtration, RO Membrane purification through 0.0001 micron rating Membrane Filter and Post Carbon for colour removal and taste improvement.

Water softening systems are available in 10 LPH, 20 LPH and 50 LPH capacities. Water purified using the System is free from suspended impurities, Organic impurities, all unwanted salts, Heavy Metals, bacteria and virus, Pesticides etc. etc. (Widely used in for Bore well (Heavy salts) water applications)

FRIENDS AQUA offers an effectual range of Effluent Treatment Plants for recycling of wastewater to reduce water demand. The comprehensive treatment solution works at various levels and involves various physical, chemical, biological and membrane processes. FRIENDS AQUA also provides effluent treatment solutions for various types of industrial waste water. Customized systems to suit the wide variety of effluents and to maintain efficiency are provided to industries. These systems include physic-chemical treatment, biological treatment, tertiary treatment and membrane separation process to achieve the zero-discharge standards laid by statutory authority. We provide innovative and economical systems for waste from industries like chemicals, drugs, pharmaceutical, refineries, dairy, ready mix plants & textile etc.

1. Screening/ Grit chamber: To remove floatable matter and sand, grit, stones in raw effluent.
2. Oil & grease trap: To remove floatable oil and grease from raw effluent.
3. Primary treatment: Includes chemical treatment (coagulation, flocculation, neutralization) and solid-liquid separation for removal of suspended solids.
4. Secondary Treatment: Includes biological treatment for reduction of BOD/COD and solid-liquid separation. Biological treatment can be aerobic or anaerobic depends on quality of raw effluent. Aerobic- ASP (Activated Sludge Process), MBBR/FAB (Moving Bed Bioreactor/ Fluidized Aerated Bioreactor), SAFF (Submerged Aerated Fixed Film Bioreactor), MBR (Membrane Bioreactor) Anaerobic- UASB (Up-flow anaerobic Sludge Blanket Reactor)
5. Tertiary treatment: Sand and carbon filtration for removal of suspended solids and organic material. Ultra-filtration and Reverse Osmosis are the advanced technologies to be implemented for zero-discharge system.

We are leading names in the field of offering competitive solutions for Ultra filtration systems. These are systems based on separation process using membranes having pore sizes in range of 0.1 to 0.001 micron and provide assistance in removing colloidal materials, high molecular-weight substances as well as organic & inorganic polymeric molecules. The Ultra filtration membranes used in these systems have flux varying between 50 and 200 GFD at operating pressure of about 50 psig.

In the filtration process, Ultra-Filtration (UF) utilizes trans-membrane pressure differential for separating particles as per molecular weights. The raw water particles are smaller than pore of UF membrane get permeate and particles larger than UF membrane pore size get separated as concentrate under applied pressure.

1. It is asymmetric semi-permeable membrane made using high molecular material

2. The hollow fiber tubes are covered by micro-pores that allow solutions flowing in/out the membranes under influence of pressure

3. UF membranes have pore sizes from 0.1 to 0.005 m for different applications

4. Normally, this process is utilized in removing-

- High molecular-weight substances

- Colloidal materials

- Bacteria

- Organic/inorganic polymeric molecules

The noted advantages of UF Filtration membranes include:

1. Require minimum pumping energy, thus providing saving on energy

2. Offering chemical resistance over wide PH range

3. Easy to operate & maintain with low investment costs

4. Recovery ratio up to 98%

1. Some of the industries these are used in include:

2. Surface Water Clarification

3. RO Pre-Treatment

4. Waste Water Treatment

GUAPURO offers complete Turnkey Swimming Pool Project as well as offers Pool Filters and accessories. Aguapuro have developed standard compact filters for swimming pools. Advantage of these type of filter is, they can be repeatedly used after backwash.

Turnkey Project covers complete Designing, Civil Construction, Plumbing and Filtration Plant supply and Pool operation on completion and Handover of the Pool.

Aguapuro Equipments offer various products required for Swimming Pool along with Filtration Plant, List of items are as follows :

1. Pool Filters FRP / MS / SS

2. Re- Circulation Pumps

3. Hair Catcher unit Dosing Systems

4. Under Water Lights

5. Overflow Gratings

6. Pool Cleaning Brush

7. Pool Chemicals

We are offering highly durable Water Softening Plant that is used for removing hard salts and providing suitable water. The water gets hard when it contains more of calcium and magnesium ions. Softening is the ion exchange process, which is done through resin, is preferred over others plant as it is one of the best possible method for removing from water. Here, undesirable ions are exchanged for ions that are more required. The process comprises of passing the unrefined water containing hardness through a bed of cation resin in sodium form. The hardness ions Ca & Mg are then up by resin and in exchange, the sodium ions are turned down from the resin. This is the service cycle, where the hard water is being softened in this plant.

1. Capacity (m3/hr) : 1000

2. Material : Alloy Steel

3. Working pressure : 0.15-0.5 Mpa

FRIENDS AQUA offers complete solution for Sewage Water Treatment Plants and Recycle. The Sewage from the residential and commercial buildings is treated for reduction in BOD, COD & TSS in order to comply with the pollution control board standards for disposal, gardening, flushing and other non-potable purposes.

The sewage treatment plants are based on the Latest FAB (Floating Aerobic Biomedia) or SAFF (Submerged Aerobic Fixed Film) treatment followed by clarification by a tube settler. Lime is dosed in for suppression of foaming tendencies. The clarified water is then further filtered in a Multi media Sand Filter after dosing of coagulant (alum) for removal of unsettled suspended impurities followed by Sand Filter and Activated Carbon Filter for removal of organics. The filtered water from ACF is then chlorinated & stored in the treated water tank.

These sewage treatment plants are available in RCC constructed designs for commercial and residential buildings as well as Mild Steel FRP Lined and Fibre constructed tanks for easy installation and commissioning.

Sewage treatment systems are available from 50 M3 per day to 1000 M3/day and more.Water thus obtained can be used for gardening, flushing, car washing, etc.

Systems are offered for achieving zero discharge using UF and RO systems further to treat sewage.

Desalination Plant is used for precise pretreatment process for removal of salts and minerals from the seawater using Reverse Osmosis.

We have gained expertise in offering high quality Desalination Plant to the esteemed customers, as per their requirements. These plants are fabricated using genuine quality raw material, procured from some of the most trusted sources. Moreover, we check these plants on certain well-defined parameters to gauge their flawless nature.

The OS Series steel Coalescing Oil Water Separators are designed for applications where a high performance coalescing oil water separator design is desired using coalescing media. The industrial duty OS design has many features such as solids V-hopper, adjustable water weir, integral inlet diffuser, A-36 carbon steel or stainless steel construction and many options to provide engineers, system integrators and end users with convenience and flexibility in oil separator system configuration choices.

Customization & modifications to fit your project needs are offered. Typical performance is 10 ppm or less, 30 micron oil droplet.

Products removed: motor oils, fuels (vehicle/jet), fuel oils, hydraulic fluids, immiscible machining oils, lube oil, transmission fluid, bunker c, DNAPL, LNAPL, vegetable based oils, crude, air compressor lube & other hydrocarbon based derivatives (BTEX etc.). Model sizing is based on the oil/fuel specific gravity, droplet size removal desired and other parameters of the waste stream

Portable chillers use mechanical refrigeration to cool recirculated fluids that support industrial process cooling applications.

2. Portable chillers include an internal pumping system and reservoir system.

3. Portable chillers can be moved between use points as needed.

4. Air-Cooled chillers use indoor ambient air to dissipate the heat from the refrigeration system.

UV sterilizers are a highly effective, reasonably priced, and low maintenance approach to deal with harmful pathogens in your water without the need to use potentially harmful chemicals like chlorine.

FRIENDS AQUA carries a complete range Ultra Violet Sterilization System made of SS 316 designed to disinfect potable drinking water, Process water and wastewater without the use of heat or chemicals.

Our Standard features of UV sterilization system includes individual lamp indicator, ballast, drain, test port etc. while Optional features include wiper system either manual or programmable automatic, UV monitoring, intensity meter.

Our modular design allows for a wide range of flow rate ranging from 200 LPH to 50000 LPH and larger flows can be handled by mainfolding units together.

UV Sterilization systems are also available with Pre Micron Filtration units to avail the best results by avoiding shadow effect.

All of our systems are designed using the state-of-the-art Quartz Technology which gives the best penetration of UV rays through Silica Quartz Jacket and the lamp used is also of hard glass for obtaining more UV output of > 50000 micro watts sec/cm2.

1. chemical free approach - no harmful chemicals added to your water and no harmful bi-products are created

2. effectively kills bacteria, viruses, mold spores, fungi, oocysts and other microbiological contaminants

3. easy to install, operate, and maintain

4. cheaper than other treatment methods like chlorination and ozone

5. excellent price point relative to UV sterilizers of similar quality