Our Products
Refrigeration Parts
1 Products availableProduct Line OverviewWide range of twin screw compressor models with displacement from 199 to 1085 m3/h (50Hz) for refrigeration applications, air conditioning, heat pumps.Appropriate for traditional HFC and HCFC-based refrigerants, HFOs and Hydrocarbons.The whole range can operate with inverter.
Wide choice of configurationsEasy installation and accessibilityWide operational fieldFor HFC, HFO and Hydrocarbon refrigerantsHigh specific and seasonal efficiencyReduced oil carry-overLow noise in all working conditionsElectronic protection systemStep or stepless capacity controlAll models compatible with VFDModels with integrated VFD (CX-IT series)Wide selection of accessories2-year standard warranty
Product Line OverviewWide range of twin screw compressor models with displacement from 120 to 538 m3/h (50Hz) for refrigeration applications, air conditioning, heat pumps.Appropriate for traditional HFC and HCFC-based refrigerants, HFO blands and Hydrocarbons.The whole range can operate with inverter.
Easy installation and accessibilityWide operational fieldFor HFC, HFO blends and Hydrocarbon refrigerantsHigh specific and seasonal efficiencyLow noise in all working conditionsBuilt-in electronic protection systemStep capacity control and unloaded startAll models compatible with VFDConnection for economizer circuitWide selection of accessories2-year standard warranty
Frascold's patented Reduced SuctionHead technology allows our reciprocating compressors to run unloaded indefinitely. Unlike standard capacity control, RSH capacity clets the compressor run without overheading while energized. This revolutionary feature prvides application flexibility while reducing heat, vibration and damage from unloading stress.
Product line overviewOpen-drive screw compressors ATS series is designed to provide a high cooling capacity, with or without economizer, operating with any HFC, HCFC, HFO refrigerant and also Ammonia.The main use is in marine/industrial cooling and process cooling, but they have also good performance in heat pump and air conditioning systems. The compressors can operate in parall installation with common oil separator.All compressors fit a high quality mechanical sealer suitable to all refrigerants, the operation is silent and vibration-free, besides, the ATS can be easily coupled to standard IEC electric motors, by means of optional coupling joints for direct connection.
Wide operational fieldFor HFC, HCFC, HFO blends and AmmoniaLow noise and no vibrations at all operating conditionsStep capacity controlEasy installation and accessibilityMinimal and essential maintenanceHigh quality mechanical sealer suitable to operate with any refrigerantDirect coupling with any IEC electrical motorWide selection of accessories2-year standard warranty
Frascold's patented Reduced SuctionHead technology allows our reciprocating compressors to run unloaded indefinitely. Unlike standard capacity control, RSH capacity clets the compressor run without overheading while energized. This revolutionary feature prvides application flexibility while reducing heat, vibration and damage from unloading stress.
FRASCOLD offers a full range of compressors able to cover a variety of applications in the areas such as Commercial and Industrial refrigeration, Mobile refrigeration, Air conditioning, Heat pump.
Over the years, different product ranges have been developed and enlarged to meet the requirements dictated from the evolution of the market, both at application level and at normative level. The current product portfolio is undoubtedly one of the widest on the market.
Frascold compressors distinguish themselves, in addition to higher efficiency and quietness compared to market standards, also for several and unique innovative solutions.
With the current range of compressors, Frascold can meet various needs and is ready to deal with new challenges of the market, by offering dedicated solutions for: Natural Refrigerants (CO2, NH3, hydrocarbons). HFO Refrigerants. New refrigerant mixtures and "low GWP".
Constantly Frascold is engaged in developing products and technical solutions for the near future, in collaboration with the main players in the refrigeration market
Accessory | Accessory code |
Phase cut control for single phase fan motor[1][2] | T00ECA1485 |
Oil separator | USOS16 |
Package (sight glass, filter dryer, shut-off valve, high/low pressure switch, high pressure switch for condensing control, electric box only for certain models) | Con scatola elettrica |
Protective housing: mounted on the unit[3] | USHAOU17-LB |
Protective housing: shipped stand alone[3] | USHAOU17 |
Check valve on the discharge line | T00EC1351LB |
Solenoid valve on the liquid line (24Vac)[4] | T00ECA1297LB |
Note | |
[1] | The phase cut control regulator is available only with single-phase fan motor; if You need it, please choose units with single phase fan motor (that ends with "M") or request the "M" version even for units that are has the final letter "T" (three phase fan motor) as default. |
[2] | In case of package, with this optional, the high pressure switch is not supplied |
[3] | For the units with compressors models A, B, D VS series (with integrated inverter) it's not possible to use protective housing |
[4] | In case of package, with this optional, the liquid line valve is not supplied |
SI | IP | |
Compressor | A07-5Y | A07-5Y |
Weight (without housing) | 79 kg | 174.16 lb |
Housing weight | 27 kg | 59.52 lb |
Total length (without housing) | 987 mm | 38.89 inch |
Total width (without housing) | 700 mm | 27.58 inch |
Total height (without housing) | 506 mm | 19.94 inch |
Total length (with housing) | 987 mm | 38.89 inch |
Total width (with housing) | 723 mm | 28.49 inch |
Total height (with housing) | 531 mm | 20.92 inch |
Suction line connection | 15.8 mm - 5/8" | 15.8 mm - 5/8" |
Liquid line connection | 12.7 mm - 1/2" | 12.7 mm - 1/2" |
Number of fan | 2 | 2 |
Fan motor voltage at 50 Hz (others on request) | 220-240V/1/50Hz V/ph/Hz | 220-240V/1/50Hz V/ph/Hz |
Current for one fan at 50 Hz | 0.69 A | 0.69 A |
Power for one fan at 50 Hz | 165 W | 165 W |
Air flow to condenser at 50 Hz | 5000 m3/h [50Hz] | 176,600.00 CFH [50Hz] |
Fan motor voltage at 60 Hz (others on request) | 220-240V/1/60Hz V/ph/Hz | 220-240V/1/60Hz V/ph/Hz |
Current for one fan | 0.91 | 0.91 |
Power for one fan | 215 | 215 |
Air flow to condenser at 60 Hz | 6000 m3/h [60Hz] | 211,920.00 CFH [60Hz] |
Condenser volume | 3.12 l | 105.50 fl oz |
Liquid Receiver | USLR03-M | USLR03-M |
Receiver volume | 2.2 l | 74.39 fl oz |
R134a | 2.3 kg | 5.07 lb |
R404A - R507A | 2.2 kg | 4.85 lb |
R22 | 2.3 kg | 5.07 lb |
R407C | 2.3 kg | 5.07 lb |