We offer wide range of Bucket Elevator. Bucket Elevator used for vertical conveying of bulk material of various kinds and can be of belt type or chain type. Different types of bucket profiles are available for specific applications. Heights can be up to 60 mtrs. These Bucket Elevators are available with options chain and belt driven.

We offer wide range of Sector Gate. Curved blade valves are designed to shut off the flow of product from outlets of dry bulk storage bins, silos, conveyors, gravity flow chutes and other discharge points. These Sector Gate are available with options motorized and pneumatic operated.

Bucket Elevator used for vertical conveying of bulk material of various kinds and can be of belt type or chain type. Different types of bucket profiles are available for specific applications. Heights can be up to 60 mtrs. These Bucket Elevators are available with options chain and belt driven.

We offer wide range of Cyclone Separators This is a device to separate solids (in powder or granular form) from air/gases. When the material is moving as in pneumatic conveying, the solids are separated. In this device, air is made to flow at cyclonic speed and made to rotate in a cylindrical vessel of suitable design. When the solid material attains high speed, it picks up centrifugal force and choose to hold tightly to outer surface while air retains high speed it gets due to its velocity factor. Suddenly in the center, air outlet is provided for air to go out while due to centrifugal force the solid material is not able to change direction but goes downwards and gets separated. This device is capable of offering separation efficiency up to 90 %, of course depending upon design, material, bulk density etc. There is one collecting hopper where material gets collected.

Smaller the diameter better is the efficiency.

Diverters employ an axially mounted plate to control the flow of materials. Flow may be diverted to one of two tubes, which intersect at a fixed angle. These diverters are available with options motorized and pneumatic operated.

we offer wide range of multi- cyclone separators when volume of air flow is large, single cyclone tends to become inefficient. therefore it is recommended to use multiple numbers of cyclones thus called multi cyclone. it has a common body container wherein numbers of small cyclones are included, each handling small volumes, thus offering better efficiency. thus, number of cyclones operating together offer far better performance for larger volume than single one. of course dimensions are favorable too and so the cost.

We offer wide range of Slide Gates. Use at the bottom of Silo's, hoppers, material storage bin as an isolation gate or to control particle size.

AVAILABLE IN TYPES

* PNEUMATIC SLIDE GATES* MANUALSLIDE GATES* MOTORIZED SLIDE GATE* RACK & PINION SLIDE GATE* ROD GATE* KNIFE GATE.

Rotary Airlock Valve (RAV) is the equipment which is fitted below the Bag Filter, Cyclone, Multicyclone etc. The main function of the RAV is to lock the air and discharge the dust powder. In the Bag Filter system there is negative pressure in the Bag Filter. So at the powder discharge point if there is any air leakage the powder will not fall down. So to restrict the leakage we provide the Rotary Airlock Valve. RAV consists of a stator & rotor. The radial & axial clearance is between 0.1 to 0.3 mm. The rotor has vanes (6 or 8) welded on the shaft. The rotor is mounted on the bearings at both the ends of the stator. A Geared Motor is provided to rotate the rotor. Since the clearance between rotor & stator is so low. Because of this air leak is very minimum and it delivers only powder.

We offer wide range of Bucket Elevator. Bucket Elevator used for vertical conveying of bulk material of various kinds and can be of belt type or chain type. Different types of bucket profiles are available for specific applications. Heights can be up to 60 mtrs. These Bucket Elevators are available with options chain and belt driven.

We offer wide range of Sector Gate. Curved blade valves are designed to shut off the flow of product from outlets of dry bulk storage bins, silos, conveyors, gravity flow chutes and other discharge points. These Sector Gate are available with options motorized and pneumatic operated.

Bucket Elevator used for vertical conveying of bulk material of various kinds and can be of belt type or chain type. Different types of bucket profiles are available for specific applications. Heights can be up to 60 mtrs. These Bucket Elevators are available with options chain and belt driven.

We offer wide range of Cyclone Separators This is a device to separate solids (in powder or granular form) from air/gases. When the material is moving as in pneumatic conveying, the solids are separated. In this device, air is made to flow at cyclonic speed and made to rotate in a cylindrical vessel of suitable design. When the solid material attains high speed, it picks up centrifugal force and choose to hold tightly to outer surface while air retains high speed it gets due to its velocity factor. Suddenly in the center, air outlet is provided for air to go out while due to centrifugal force the solid material is not able to change direction but goes downwards and gets separated. This device is capable of offering separation efficiency up to 90 %, of course depending upon design, material, bulk density etc. There is one collecting hopper where material gets collected.

Smaller the diameter better is the efficiency.

Diverters employ an axially mounted plate to control the flow of materials. Flow may be diverted to one of two tubes, which intersect at a fixed angle. These diverters are available with options motorized and pneumatic operated.

we offer wide range of multi- cyclone separators when volume of air flow is large, single cyclone tends to become inefficient. therefore it is recommended to use multiple numbers of cyclones thus called multi cyclone. it has a common body container wherein numbers of small cyclones are included, each handling small volumes, thus offering better efficiency. thus, number of cyclones operating together offer far better performance for larger volume than single one. of course dimensions are favorable too and so the cost.

We offer wide range of Slide Gates. Use at the bottom of Silo's, hoppers, material storage bin as an isolation gate or to control particle size.

AVAILABLE IN TYPES

* PNEUMATIC SLIDE GATES* MANUALSLIDE GATES* MOTORIZED SLIDE GATE* RACK & PINION SLIDE GATE* ROD GATE* KNIFE GATE.

Rotary Airlock Valve (RAV) is the equipment which is fitted below the Bag Filter, Cyclone, Multicyclone etc. The main function of the RAV is to lock the air and discharge the dust powder. In the Bag Filter system there is negative pressure in the Bag Filter. So at the powder discharge point if there is any air leakage the powder will not fall down. So to restrict the leakage we provide the Rotary Airlock Valve. RAV consists of a stator & rotor. The radial & axial clearance is between 0.1 to 0.3 mm. The rotor has vanes (6 or 8) welded on the shaft. The rotor is mounted on the bearings at both the ends of the stator. A Geared Motor is provided to rotate the rotor. Since the clearance between rotor & stator is so low. Because of this air leak is very minimum and it delivers only powder.

Dust Collector system consists of a blower, dust filter, a filter-cleaning system and a dust receptacle or dust removal system. It is distinguished from air cleaners which use disposable filters to remove dust. The dust-laden air enters the Bag Filter. The dust powder separates inside the bag air filter chamber. The air is uniformly distributed avoiding channeling while the powder is separated. Initially a coat of material forms on the bags. Subsequently, the coat acts as the filtering medium. The dust is accumulated on filter elements while the air passes through the filter bags from outside to inside. The accumulated powder is dislodged from the bags by reverse pulse jet air intermittently. The dislodged powder falls on bottom cone and is discharged through powder discharge valves. The dust free air is sucked by induced draft fan and is exhausted to atmosphere.

We offer wide range of Bag Filter Designed to handle heavy dust loads, a Dust Collector system consists of a blower, dust filter, a filter-cleaning system and a dust receptacle or dust removal system. It is distinguished from air cleaners which use disposable filters to remove dust. The dust-laden air enters the Bag Filter. The dust / powder separates inside the bag air filter chamber. The air is uniformly distributed avoiding channeling while the powder is separated. Initially a coat of material forms on the bags. Subsequently, the coat acts as thefiltering medium. The dust is accumulated on filter elements while the air passes through the filter bags from outside to inside. The accumulated powder is dislodged from the bags by reverse pulse jet air intermittently. The dislodged powder falls on bottom cone and is discharged through powder discharge valves. The dust free air is sucked by induced draft fan and is exhausted to atmosphere.