Product / Services
Post Buy Requirement
FE

Fouress Engineering India Limited
Peenya, Bangalore, Karnataka

Add Review
Call Now Call Now

Our Products

  1. Industrial Valves 15 Products available
  2. Valves & Valve Fittings 11 Products available

  3. Furnace Parts

    1 Products available

  4. Separators & Strainers

    1 Products available

  5. Bags

    1 Products available

  6. Gearbox & Gear Parts

    1 Products available

  7. Bearings

    1 Products available
  8. Others Products 5 Products available

Industrial Valves

We offer the best product range of Septum Valves, Diverter Flap Valve, 4S V336L Knife Gate Valves, forged steel check valves and Turbine Inlet Butterfly Valve.

Septum Valves

Septum Valves
  • Body Carbon steel refractory lined
  • Disc Stainless steel
  • Shaft Alloy steel
This valve is an assembly of several butterfly valves with one body. It effectively controls the top pressure of the blast furnace for a wide range of flows at differential pressure. This valve is generally located after the gas cleaning plant. In case the valve is installed before GCP, water spraying arrangement can be provided.
View Complete Details
Ask Latest Price & Details
Diverter Flap Valve

Diverter Flap Valve
  • Frame IS 2062, BQ 2002, IS 2062 Internal Insulation
  • Blade IS 2062, BQ 2002, Alloy Steel /SS 304/ SS 316/
Most gas handling systems have a requirement to change the gas flow direction to allow access to critical components, without shutting down the whole plant. With traditional dampers there is the danger of an upset, or explosion, if the two dampers do not act simultaneously. The FOURESS Diverter Valves was developed to handle such a situation in gas-turbine installations which incorporates a heat recovery boiler. Subsequently the concept has been used in a wide variety of industrial applications, such as refinery heat recovery plants, pollution control and nuclear ventilation systems and D.G Sets.
View Complete Details
Ask Latest Price & Details
4S V336L Knife Gate Valves

4S V336L Knife Gate Valves
The Sharp Solution to Heavy Fluid Shutoff Problems Sludges, slurries, powders. Problem fluids that challenge todays pulp and paper, chemical, textile and sewage plants. FOURESS meets this challenge, by refining the Knife Gate Valves. A precision-buffed knife plate cuts even the heaviest Sludges, sharply and without erosion. One-piece trim provides corrosion-resistant, wear-resistant, high-performance shutoff over a long service life. FOURESSs compact, lightweight Knife Gate Valves have been handling the industrys problem fluids dependably for over 30 years.
View Complete Details
Ask Latest Price & Details
forged steel check valves

Forged Steel Check Valves
  • Body ASTM A 105 /F304/F316/F304L/F316L
  • SEATRING 13% Cr. Steel/SS304/SS316
  • DISC / WEDGE 13% Cr. Steel/SS304/SS316
FOURESS forged check valves have set their own standards in many industries, much like our super-specialty valves. Available in sizes, from 14 to 2 for pressure #800 & #1500 with forged carbon steel (ASTM A105); forged alloy steel (ASTM A 182 Gr. FSF11F22);forged stainless steel (ASTM A 182 Gr. F304F304L);forged stainless steel (ASTM A 182 Gr. F316F316L). The raw materials are sourced through reputed foundries and forge shops approved by major consultants in India. Rotary table surface grinding and imported lapping machines ensure a fine surface finish of 100% leak-tightness. The trim materials is hardened and tempered for higher durability and performance. Further satellite trim can also be provided. The valves offer can meet both API and BS Standards requirements.
View Complete Details
Ask Latest Price & Details
Turbine Inlet Butterfly Valve

Turbine Inlet Butterfly Valve
These specialized Butterfly valves are installed to protect hydro-electric installations against the possibility of penstock rupture. Valves are designed to close against turbine runaway during an emergency condition. These valves act as isolating devices for inspection of penstock without dewatering entire head race tunnel. Yet another important application is for large water supply schemes fed from reservoirs through long pipelines, failure of which can cause disastrous floods. Valves, by virtue of their design and robust construction, close down automatically and instantaneously in the event of the downstream pipeline failure. These valves close during over velocity condition occurring due to turbine trip or runaway condition. Further, these special design Butterfly Valves can also be used for turbine inlet application instead of Spherical Valves.
View Complete Details
Ask Latest Price & Details
Pressure Relief Valves

Pressure Relief Valves
  • Construction Fabricated design
  • Body Carbon steel
  • Disc Carbon steel / IS 1030
Used for bleeding gas to the atmosphere in steel plants at the locations like furnace bleeder valves and dust catcher bleeder valves.
View Complete Details
Ask Latest Price & Details
Double Eccentric Butterfly Valves

Double Eccentric Butterfly Valves
  • Construction Fabricated design
  • Shell Carbon steel / Stainless Steel
  • Bonnet Carbon steel / Stainless Steel
  • Shaft Alloy Steel
These are used for isolation of mains carrying gaseous media such as combustion air, cold blast, fuel gas, B.F. gas, nitrogen etc. Used in metallurgical, chemical and power plants.
View Complete Details
Ask Latest Price & Details
Contacting Butterfly Valves

Contacting Butterfly Valves
  • Body Carbon steel / Stainless Steel
  • Disc Carbon steel / Stainless Steel
Widely used in the process industries for flow isolation, where minor leakage within the process are permissible
View Complete Details
Ask Latest Price & Details
Triple Eccentric Butterfly Valves

Triple Eccentric Butterfly Valves
  • Body Carbon steel / Stainless Steel
  • Disc Carbon steel / Stainless Steel
  • Seat Ring Carbon Steel
  • Shaft Alloy Steel
Used in gas lines of stoves, gas cleaning plants, flare stacks etc. Features laminated seal to handle high temperature and dusty medium.
View Complete Details
Ask Latest Price & Details
Non Contacting Butterfly Valves

Non Contacting Butterfly Valves
  • Construction: Fabricated design
  • Shaft Alloy Steel
Widely used in the process industries for flow and pressure regulation applications. These valves can also be offered with special drive arrangements for continuous regulation duties.
View Complete Details
Ask Latest Price & Details
Forged Steel Gate Valves

Forged Steel Gate Valves
  • Body ASTM A 105 /F304/F316/F304L/F316L
  • SEATRING 13% Cr. Steel/SS304/SS316
  • DISC / WEDGE 13% Cr. Steel/SS304/SS316
  • STEM AISI410/AISI304/AISI316
FOURESS forged steel gate, globe & Check valves have set their own standards in many industries, much like our super-specialty valves. Available in sizes, from 14 to 2 for pressure #800 & #1500 with forged carbon steel (ASTM A105); forged alloy steel (ASTM A 182 Gr. FSF11F22);forged stainless steel (ASTM A 182 Gr. F304F304L);forged stainless steel (ASTM A 182 Gr. F316F316L). The raw materials for gate, globe & Check valves are sourced through reputed foundries and forge shops approved by major consultants in India. Rotary table surface grinding and imported lapping machines ensure a fine surface finish of 100% leak-tightness. The trim materials is hardened and tempered for higher durability and performance. Further stellited trim can also be provided. The valves offered can meet both API and BS Standards requirements.
View Complete Details
Ask Latest Price & Details
Forged Steel Globe Valves

Forged Steel Globe Valves
  • Body ASTM A 105 /F304/F316/F304L/F316L
  • STEM AISI410/AISI304/AISI316
  • BONNET / COVER BOLT ASTM A 193 Gr. B-7
FOURESS forged globe valves have set their own standards in many industries, much like our super-specialty valves. Available in sizes, from 14 to 2 for pressure #800 & #1500 with forged carbon steel (ASTM A105); forged alloy steel (ASTM A 182 Gr. FSF11F22);forged stainless steel (ASTM A 182 Gr. F304F304L);forged stainless steel (ASTM A 182 Gr. F316F316L). The raw materials are sourced through reputed foundries and forge shops approved by major consultants in India. Rotary table surface grinding and imported lapping machines ensure a fine surface finish of 100% leak-tightness. The trim materials is hardened and tempered for higher durability and performance. Further satellite trim can also be provided. The valves offer can meet both API and BS Standards requirements.
View Complete Details
Ask Latest Price & Details
4S-V515A Compact Seal Butterfly Valves

4S-V515A Compact Seal Butterfly Valves
  • APPLICABLE FLANGES BS: 4504 PN 10, ANSI 125ib/150lb
  • MAX. SERVICE PRESSURE 10 Kg / Cm2
  • SERVICE TEMPERATURE NBR (-10°C to +80°C), EPDM (-20°C to 120°C)
Compact Seal Butterfly Valve excels over other conventional valves such as gate valve and globe valve in all aspects, especially in terms of light weight (13 -15 of conventional valves), less number of component parts, no flange gaskets required and economical operation and maintenance costs. The valve seats are constructed by a strong replaceable synthetic rubber, Fouress own seating mechanism of pressure-touch system offer a very low torque, tight shut-off with Ni leakage, compact actuator selection and long service life. Typically application of this valves are in pump rooms of large air-conditioning plants, as well as cooling towers; at heat exchanger inlet outlet, as a control butterfly valve; in ships, for engine room cooling water, ballast control; for smoke discharge and desulphurization in power plants or in denigration plants; in paper and pulp industry, oil refineries, steel and fertilizer plants; in sewage treatment plants; for water supply schemes; in air and gas lines etc.
View Complete Details
Ask Latest Price & Details
4S-V5422 High Performance Butterfly Valves

4S-V5422 High Performance Butterfly Valves
  • APPLICABLE FLANGES JIS 10K, 16K, 20K / ANSI 125lb, 150 lb / BS NP16,
  • MAX. SERVICE PRESSURE 20 Kg /Cm2
  • SERVICE TEMPERATURE -50°C TO +230°C
Fouress have introduced the unrivalled 4S-V5422 high performance butterfly valve that replaces the general valves like Ball Valves and Gate Valves. The innovative design is compact, light in weight and economical. As illustrated, fluid pressure to the disk and seatring ensures a secure seal for flow directions from both A & B. the L shaped seatring absorbs the fluid pressure tightly against the disc, creating a complete seal. The teflon seatring is designed to withstand extremely corrosive chemical solutions and high temperature fluids up to 2300 C (Eg. dematerialized water, air-conditioning chilledhot water, white liquor, formal dehyde solution, organic solvent, compressed air, oxygen, exhaust gas, coke oven gas etc.)
View Complete Details
Ask Latest Price & Details
Double Disc Gate Valve

Double Disc Gate Valve
Isolation of gas air pipelines. Used in steel plants for isolation of gas air for coke oven by-product plants like Benzol, H2SO4 plants, nitrates fertilizer, naptha, tar, ammonia liquior lines, reheating furnaces, power plants and inter plant pipelines.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.