Post Buy Requirement
FE

Fouress Engg India Limited

Add Review

Other Products / Services

Our Complete range of products are Slide Plate, Bleeder Valves (Cap Type), Flap Isolators, Twin Seal Flap Isolators and Dust Extraction Valves.

Slide Plate

  • Shell Carbon steel
  • Shaft Alloy Steel
  • Seat Nitrile / Silicon Seal
Isolation of gas air pipelines. Used in steel plants for isolation of gas air for coke oven by-product plants like Benzol, H2SO4 plants, nitrates fertilizer, naptha, tar, ammonia liquior lines, reheating furnaces, power plants and inter plant pipelines.
View Complete Details

Bleeder Valves (Cap Type)

  • Construction Fabricated design
  • Body Carbon steel
  • Flanges Carbon steel
Used for bleeding gas to atmosphere in steel plants at the locations like furnace bleeder valves and dust catcher bleeder valves.Used for bleeding gas to the atmosphere in steel plants at the locations like Furnace bleeder valves, Dust catcher bleeder valves.
View Complete Details

Hot Blast Valve

  • Sizes 500mm to 3000mm
  • Temperature Up to 1550°C
  • Pressure Up to 600 Kpa
Effectively used to isolate the blast furnace from hot blast stove in integrated steel plants and pig iron making facilities using stoves. Also are used as a stove shut-off valve and back draughting valve. For a burner shut-off valve the same design is adopted with wedge arrangements to achieve isolation of gas lines from stoves.
View Complete Details

Coffee Pot Valve

  • Construction Fabricated design
  • Body Carbon steel refractory lined
  • Disc Stainless steel
Used for gas venting and pressure releasing applications in steel plants. It is back drafting, bringing down the hanging burdens and for furnace bleeding application.
View Complete Details

Flap Isolators

Most systems, handling gas, require sections to be isolated for maintenance without shutting down the complete plant, Hitherto, in sophisticated plants, this has been achieved by using gate valves. Fouress flap isolators now offer a simpler and cheaper solutions without any loss in sealing efficiency. In particular they require less external space and no special precautions against wind loading, can be supplied in modular form, allowing easy installation in large ducts, need no external supports when installed in vertical or horizontal ducts.
View Complete Details

Twin Seal Flap Isolators

Safety and reliability have been a challenge in todays coal fired boilers at thermal power stations. FOURESS, in technical consultation with a few discerning customers have developed the perfect solution to the pressing problem of effective isolation of PF mills. This has been done with the ingenious concept of TWIN SEAL FLAP (TSF) Isolator, which guarantees 100% sealing efficiency for safe access to on-load maintenance of PF mills. Majority of the coal fired boilers in India use guillotine gates as Isolating equipment for PF mills. This technology has become out dated owing to its ill-equipped provisions. As such, Maintenance Engineers on the site face a host of problems, some of which are as follows : Existing guillotine gates do not use an effective sealing system. This results in leakage of gas to the downstream. High velocity coal laden gas further aggravates the leakage making it virtually impossible for maintenance personnel to take up on-load maintenance. Thus an additional blanking plate becomes essential.The entire operational area gets polluted due to transit leakage during operation of the guillotine gate.There is frequent failure of cylinder seals owing to heat radiation during operation.
View Complete Details

Gas Turbine Exhaust System

Fouress Engineering (India) Limited, is a part of Fouress Group of Companies, one of the leading manufactures of Industries Valves for over 40 Years in India. We were the first to introduce 100% gas tight Isolators (High Integrity Dampers) to the Indian Power Industry way back in 1977 and have the distinction of having supplied around 5000 gas-tight isolators (dampers) of various design and sizes up to 6000 mm x 6000 mm to thermal, Gas Turbine to Thermal, Gas Turbine based Combined Cycle Power Plants, Steel Mills, Cement Plants, Fertilizer Plants, Refineries etc. We have supplied around 100 Diverter Flap Valves and 200 Guillotine Isolators for installation at various sites in India. We are the first in this country to supply the Biggest Diverter and Guillotines of size 5900 mm x 5900 mm to NTPC, Faridabad Combined Cycle Power Project for Siemens V94.2 Turbines through BHEL, Hardware and the same is a land mark event in Fouress history. We had earlier supplied Diverters to Essar Power, GIPCL and NTPC Kavamkulam for GE Frame 9E Gas Turbines. In fact, the supply of Kavamkulam project was the beginning of our supplies to NTPC and we are the only Indian manufactures to have been qualifies by NTPC for the supply of Diverters and Guillotines for Large Gas Turbines.
View Complete Details

Dust Extraction Valves

Used for isolation of screw conveyor from the dust catcher, located above the screw conveyor.Used for isolation of screw conveyor from the dust catcher. located above the screw conveyor.
View Complete Details

Valve Gear Operators

Bombay Engineering Industries (BEI) is the leading manufacturer of Quarter turn gear operators with proven design and time tested indigenous technology backed by two decades of engineering expertise. These gear operators are flawless in turning the valve disc from Open to Close position and vice versa by 90 degrees. The output torque of these rugged, accurate and reliable quarter turn gear operators, range from 12 Kg-m unto 14, 000 Kg-m with suitable reduction designed for both Manual (M) and Motorised (E) operations.
View Complete Details

Low Friction Bearing

Bei, a pioneer in gear boxes poised to set trends by grindingptfe lined low friction , low maintenance bearing indian industry.Imagine the benefits this product can offer in selection of gear boxes and actuators in valve business, by reducing friction at bearing contract area, wherever conventional bush bearings are used.Needless to say, there are many application areas outside valve business like in automobile linkages, kingpin assembly, crane boom foot, mast pivot etc., where the need for low maintenance, low friction bearings can be addressed.ptfe lined on ms, ss or bronze backing material in split bush formation, made to your exacting size requirements.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us