Forview Engineering & Technology Pvt. Ltd.

Parel, Mumbai, Maharashtra

1. TheFully Automatic Shrink Wrap Machine with Duel / Twin outputare more useful for high productivity and high speed.As shrink-wrap machine name itself describes twin / duel output so there will be two pneumatic pushers for shrink wrap matrix forming.Size of pusher will be designed with respect to required matrix / collation and there will be shrinked outputs from shrink tunnel.
2. As in this duel output shrink wrap machine there will 4 shrink wrap film rolls 2 on upper feeder and 2 on lower feeder.The other operations remain same as that of single station shrink wrap machine with 90 degree OR of straight feeder option.
3. If the collation matrix of single line then 90 Degree OR straight horizontal type collation method will be used and if the required matrix of more in columns than vertical 90 Degree method or straight option will be used.
4. The products will travel in a single line for shrink wrapping operation, once both the sensors of pushers gets on the matrix forming operations initiates and accordingly the required matrixes started creating
5. A pneumatic pusher collates the boxes / containers into the pre-selected pack formation, which upon completion is transferred into the web sealer area of shrink wrapping unit for welding.
6. Once the cutting and welding operation completes in web-sealer area, the pusher returns to prepare the next collation of product.
7. As the welding bar ascends, the pusher advances to transfer the new collation into the welding position, at the same time displacing the previously wrapped collation onto continuously moving shrink tunnel conveyor.
8. The wrapped collation soon enters the shrink tunnel chamber where re-circulated hot air causes the wrap to shrink and tightly conform to the contours of the contents.
9. Once the pack is out of the hot chamber, forced air cooling is used to tighten sleeve wrap to achieve a strong, secure pack ready for stacking on pallet or a placing on a shipping carton.

1. 90 Deg feeding shrink wrap machine
2. Straight Feeding shrink wrap machine
3. Horizontal collator/ matrix forming Shrink Wrap Machine
4. Vertical collator /matrix forming Shrink Wrap Machine
5. Side sealing Shrink wrap machine

Fully Automatic Shrink Wrap Machine

Thefully automatic shrink-wrap machineis such a machine using such shrink-wrapping machine the products can be collect and can make proper matrix for the products manufactured in Pharma , non-pharma such as food and FMCG companies.

TheFully automatic shrink wrapping machinesare more applicable and are suitable for the high speed production filling and packing lines to complete the packing activities in short period.

The high speed filling and packing production lines can be seen in following companies and product lines:

1. Fully automatic Shrink wrapping machine for pharma companies product line
2. fully automatic Shrink wrap machine for syrup filling and packing lines
3. fully automatic Shrink wrap machine for tablet blisters packing line
4. Fully automatic Shrink Wrapping machine for FMCG and Food manufacturing companies
5. fully automatic Shrink Wrap machine for food packing lines line juice, souse , soup etc

fully automatic Shrink wrap machine is more useful for cold drinks , cola and mineral water packing lines and is more cost effective advantageous over shipper carton packing and also advantageous over packing timing

"Fully automatic shrink wrapping machines" work in following steps:

1. In pharma and non pharma products filling lines , after filling, capping and labeling the products will travel automatically on infeed conveyor of the wrapping station and continue moving in a single lane onto the collating table
2. A pneumatic pusher collates the boxes / containers into the pre-selected pack formation, which upon completion is transferred forward to welding position.
3. At this stage the pack is clamped, the welding bar descents to complete the wrap, and the pusher returns to prepare the next collation of product.
4. As the welding bar ascends, the pusher advances to transfer the new collation into the welding position, at the same time displacing the previously wrapped collation onto continuously moving shrink tunnel conveyor.
5. The wrapped collation soon enters the shrink tunnel chamber where re-circulated hot air causes the wrap to shrink and tightly conform to the contours of the contents.
6. Once the pack is out of the hot chamber, forced air cooling is used to tighten sleeve wrap to achieve a strong, secure pack ready for stacking on pallet or a placing on a shipping carton.

Manual Collation and feeding shrink wrapping machine

1. Semi Automatic Shrink Wrap Machineis more suitable to any form or type or design like box, bottles irrespective of shape.
2. Thesemi automatic shrink wrap machineis more suitable for low speed production lines for both pharma and food industries and for other respective applications.
3. The required collation and matrix forming will take place on collation plate which placed near to web sealer section.
4. Once the required matrix formation gets completed , manually push the matrix pusher on to welding area and take back the pusher .
5. The delay signal gets activated by sensor and gives the signal to seal bar accordingly seal bar comes down and sealing and cutting operation gets completed
6. After the sealing and cutting operation seal bar ascends, the manual pusher advances to transfer the collation into the welding position, at the same time displacing the previously wrapped collation onto continuously moving shrink tunnel conveyor.
7. The wrapped collation soon enters the shrink tunnel chamber where recirclulated hot air causes the wrap to shrink and tightly conform to the contours of the contents.
8. Once the pack is out of the hot chamber , forced air cooling is used to tighten sleeve wrap to achieve a strong, secure pack ready for stacking on pallet or a placing on a shipping carton.

Automatic Sleeve Shrink Wrapping Machine" is distinguishable from other types of shrink wrapping equipment in that the two ends of the package have an opening (often called "bulls eyes") such as commonly seen for water bottle packaging where the openings can act a handles. In point of fact a sleeve wrapper is an excellent solution for bundling a wide variety of products and is often called a "bundler".

OurSleeve Wrappersare available in a wide range of size capabilities and configurations from manual feed to fully automatic with collating. Speeds generally decrease between cased product

The Wraps manual two reel sleevewrapping machineis the lowest cost method of producing a shrink wrap for transit purposes. The system consists of the FE sleeve wrapper and the M25.40T shrink tunnel. Each machine uses a 13 amp single phase electricity supply making it an extremely mobile wrapping solution.

Shrink wrapping for transit purposes uses Polytheneshrink film, the lowest cost shrink wrapping film available. One reel of film is mounted at a high level and the other is mounted at a low level. The two reels are joined by the sealing head, forming a curtain of film through which the product is pushed.

The product to be wrapped is manually pushed through the curtain of film, enveloping the product. The sealing jaw is then brought down by hand, cutting and sealing the film producing a loose sleeve of film around the product.

The next product to be wrapped then pushes the wrapped product into the heat shrink tunnel. In the tunnel the heat shrinks the film around the product leaving two open ends at the sides. The width of the film used compared to the width of the product determines how much of an open end is created.

TheAutomatic Sleeve Shrink Wrapping Machineis suitable for products up to 550mm wide and 400mm high. Speed of operation is up to 400 products per hour.

Additional features available with side feed sleeve wrap machines:

• Easy access and easy change of pusher - the pusher takes seconds to replace thanks to excellent access to the relevant part of the sleeve wrap machine. Its also incredibly flexible; as many pusher plates as required are provided free of charge at the point of ordering
• Out-feed belt - the powered out-feed belt drives the pack automatically into the shrink tunnel, again useful for heavy or unstable collations.

If it's anAutomatic sleeve shrink wrapping machinethat you need, then YPS can help. We supply a wide variety of sleeve sealers. We offer a range ofhigh-speed sleeve wrappersaimed at the mineral water and soft drinks industry and specialist machines to wrap large items. Click start button below to view Video.

All sleeve wrappers benefit from the following features:

• Fully safety guarded to exceed C.E. Marking regulations
• Heavy duty build quality to provide years of service
• Available in a variety of sealing sizes and in-feed arrangements
• Easy and intuitive to operate
• Best in Class, Heavy duty Teflon blade: this sealing system is more effective than a wire as it provides consistently strong seals and requires less maintenance than a three wire sealing system
• Pack clamp: fitted as standard on our sleeve wrap machines. This device clamps the pack securely in place while the film seals absolutely critical for collation and unstable packs.
• Programmable pack counters to provide accurate shrink wrapping production and efficiency data, fitted as standard.

All of our high speed sleeve wrappers offer the following benefits:

• High production speeds to reduce production time
• A heavy duty sealing blade for consistently strong seals
• Jaw / product safety device to protect the operator
• Perfect shrink tunnel air distribution for consistent, high quality results
• Automatic shrink film feed to both rolls for ease of use
• Automatic and manual cycle controls for convenience
• Programmable computer controlled memory for faster and effective operation
• Print registration options to enhance operations
• Variety of infeed arrangements for complete flexibility
• Heavy duty frame construction for years of continued use
• Side chains in the shrink tunnel for improved strength

Sleeve wrap machines are more used in

1. Mineral water manufacturing company
2. Food industries like juice and jam making
3. Pharma syrups bottle sleeve insertions
4. Edilbe oil manufacturing companies
5. And all pharma and non pharma companies