A boom barrier is a bar, or pole pivoted in such a way as to allow the boom to block vehicular access through a controlled point. Typically the tip of a boom gate rises in a vertical arc to a near vertical position. Boom gates are often counterweighted, so the pole is easily tipped. Boom gates are often paired either end to end, or offset appropriately to block traffic in both directions.

We are leading supplier of huge range of Swing Gate.

We deals in supplying of wide range of Sliding Door.

We are well known for supplying of wide variety of Sliding Gate.

Finding the correct style of gate that is going to compliment your application is very important when you are considering an Automatic Gate System. Design options will include Swinging Gates verses Sliding Gates, Chain Link Gates to Wood Gates, Steel Gates to Aluminum Gates, Solid Gates to Open Gates. The options are endless and finding the one that meets your requirements will have a first impression that will last a life time.

Loops
Automatic Gate Systems often have detection loops installed in the infrastructure for various reasons. The first reason is for safety so that your Automatic Gate will detect vehicles entering and exiting your facility as they travel over the loops. There location, size and construction needs to be determined by the site as well as functions.

ElectricalAutomatic Gate System requires power to operate the system. They range depending on the system; solar systems are available, low voltage, high voltage ranging from 110vac to 480vac. Most of the components to Automatic Access System require low voltage to power them.

Biometrics comprises methods for uniquely recognizing humans based upon one or more intrinsic physical or behavioral traits. In computer science, in particular, biometrics is used as a form of identity access management and access control. It is also used to identify individuals in groups that are under surveillance.

Biometric characteristics can be divided in two main classes[citation needed]:
* Physiological are related to the shape of the body. Examples include, but are not limited to fingerprint, face recognition, DNA, Palm print, hand geometry, iris recognition, which has largely replaced retina, and odor/scent.
*Behavioral are related to the behavior of a person. Examples include, but are not limited to typing rhythm, gait, and voice. Some researchers[1] have coined the term behaviometrics for this class of biometrics.
Strictly speaking, voice is also a physiological trait because every person has a different vocal tract, but voice recognition is mainly based on the study of the way a person speaks, commonly classified as behavioral.

Closed-circuit television (CCTV) is the use of video cameras to transmit a signal to a specific place, on a limited set of monitors.
It differs from broadcast television in that the signal is not openly transmitted, though it may employ point to point, point to multipoint, or mesh wireless links. CCTV is often used for surveillance in areas that may need monitoring such as banks, casinos, airports, military installations, and convenience stores. It is also an important tool of distance education.
In industrial plants, CCTV equipment may be used to observe parts of a process from a central control room, for example when the environment is not suitable for humans. CCTV systems may operate continuously or only as required to monitor a particular event. A more advanced form of CCTV, utilizing Digital Video Recorders (DVRs), provides recording for possibly many years, with a variety of quality and performance options and extra features (such as motion-detection and email alerts). More recently, decentralized IP-based CCTV cameras, some equipped with megapixel sensors, support recording directly to network-attached storage devices, or internal flash for completely stand-alone operation.
Surveillance of the public using CCTV is particularly common in the UK, where there are reportedly more cameras per person than in any other country in the world.[1] There and elsewhere, its increasing use has triggered a debate about security versus privacy

Burglar (or intrusion), fire, and safety alarms are electronic alarms designed to alert the user to a specific danger. Sensors are connected to a control unit via low-voltage wiring or a narrowband RF signal which is used to interact with a response device. The most common security sensors are used to indicate the opening of a door or window or detect motion via passive infrared (PIR). New construction systems are predominately hardwired for economy. Retrofit installations often use wireless systems for a faster, more economical installation. Some systems serve a single purpose of burglar or fire protection. Combination systems provide both fire and intrusion protection. Systems range from small, self-contained noisemakers, to complicated, multi-zoned systems with color-coded computer monitor outputs. Many of these concepts also apply to portable alarms for protecting cars, trucks or other vehicles and their contents (i.e., "car alarms").

Door Interlocking System has Master-Slave Configuration and can be configured upto maximum 8 doors in one loop. It has the provision for emergency situation like fire etc. so as to release the door and also other provision like "door Open too long" and "Door Force Open".

We are offering video door phones are essential security solution for apartments, building, residential complexes, villas and bungalows. Audio video door entry systems are can be integrated with electronic entry systems, video entry and access control systems.

We are offering an automatic fire alarm system is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion. In general, a fire alarm system is either classified as automatically actuated, manually actuated, or both.

We are offering the simplest form of a metal detector consists of an oscillator producing an alternating current that passes through a coil producing an alternating magnetic field. If a piece of electrically conductive metal is close to the coil, eddy currents will be induced in the metal, and this produces an alternating magnetic field of its own. If another coil is used to measure the magnetic field (acting as a magnetometer), the change in the magnetic field due to the metallic object can be detected.

we are offering a public address systems (pa system) is an electronic amplification system with a mixer, amplifier and loudspeakers, used to reinforce a sound source, e.g., a person giving a speech, a dj playing prerecorded music, and distributing the sound throughout a venue or building.

A boom barrier is a bar, or pole pivoted in such a way as to allow the boom to block vehicular access through a controlled point. Typically the tip of a boom gate rises in a vertical arc to a near vertical position. Boom gates are often counterweighted, so the pole is easily tipped. Boom gates are often paired either end to end, or offset appropriately to block traffic in both directions.

We are leading supplier of huge range of Swing Gate.

We deals in supplying of wide range of Sliding Door.

We are well known for supplying of wide variety of Sliding Gate.

Finding the correct style of gate that is going to compliment your application is very important when you are considering an Automatic Gate System. Design options will include Swinging Gates verses Sliding Gates, Chain Link Gates to Wood Gates, Steel Gates to Aluminum Gates, Solid Gates to Open Gates. The options are endless and finding the one that meets your requirements will have a first impression that will last a life time.

Loops
Automatic Gate Systems often have detection loops installed in the infrastructure for various reasons. The first reason is for safety so that your Automatic Gate will detect vehicles entering and exiting your facility as they travel over the loops. There location, size and construction needs to be determined by the site as well as functions.

ElectricalAutomatic Gate System requires power to operate the system. They range depending on the system; solar systems are available, low voltage, high voltage ranging from 110vac to 480vac. Most of the components to Automatic Access System require low voltage to power them.

Biometrics comprises methods for uniquely recognizing humans based upon one or more intrinsic physical or behavioral traits. In computer science, in particular, biometrics is used as a form of identity access management and access control. It is also used to identify individuals in groups that are under surveillance.

Biometric characteristics can be divided in two main classes[citation needed]:
* Physiological are related to the shape of the body. Examples include, but are not limited to fingerprint, face recognition, DNA, Palm print, hand geometry, iris recognition, which has largely replaced retina, and odor/scent.
*Behavioral are related to the behavior of a person. Examples include, but are not limited to typing rhythm, gait, and voice. Some researchers[1] have coined the term behaviometrics for this class of biometrics.
Strictly speaking, voice is also a physiological trait because every person has a different vocal tract, but voice recognition is mainly based on the study of the way a person speaks, commonly classified as behavioral.

Closed-circuit television (CCTV) is the use of video cameras to transmit a signal to a specific place, on a limited set of monitors.
It differs from broadcast television in that the signal is not openly transmitted, though it may employ point to point, point to multipoint, or mesh wireless links. CCTV is often used for surveillance in areas that may need monitoring such as banks, casinos, airports, military installations, and convenience stores. It is also an important tool of distance education.
In industrial plants, CCTV equipment may be used to observe parts of a process from a central control room, for example when the environment is not suitable for humans. CCTV systems may operate continuously or only as required to monitor a particular event. A more advanced form of CCTV, utilizing Digital Video Recorders (DVRs), provides recording for possibly many years, with a variety of quality and performance options and extra features (such as motion-detection and email alerts). More recently, decentralized IP-based CCTV cameras, some equipped with megapixel sensors, support recording directly to network-attached storage devices, or internal flash for completely stand-alone operation.
Surveillance of the public using CCTV is particularly common in the UK, where there are reportedly more cameras per person than in any other country in the world.[1] There and elsewhere, its increasing use has triggered a debate about security versus privacy

Burglar (or intrusion), fire, and safety alarms are electronic alarms designed to alert the user to a specific danger. Sensors are connected to a control unit via low-voltage wiring or a narrowband RF signal which is used to interact with a response device. The most common security sensors are used to indicate the opening of a door or window or detect motion via passive infrared (PIR). New construction systems are predominately hardwired for economy. Retrofit installations often use wireless systems for a faster, more economical installation. Some systems serve a single purpose of burglar or fire protection. Combination systems provide both fire and intrusion protection. Systems range from small, self-contained noisemakers, to complicated, multi-zoned systems with color-coded computer monitor outputs. Many of these concepts also apply to portable alarms for protecting cars, trucks or other vehicles and their contents (i.e., "car alarms").

Door Interlocking System has Master-Slave Configuration and can be configured upto maximum 8 doors in one loop. It has the provision for emergency situation like fire etc. so as to release the door and also other provision like "door Open too long" and "Door Force Open".

We are offering video door phones are essential security solution for apartments, building, residential complexes, villas and bungalows. Audio video door entry systems are can be integrated with electronic entry systems, video entry and access control systems.

We are offering an automatic fire alarm system is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion. In general, a fire alarm system is either classified as automatically actuated, manually actuated, or both.

We are offering the simplest form of a metal detector consists of an oscillator producing an alternating current that passes through a coil producing an alternating magnetic field. If a piece of electrically conductive metal is close to the coil, eddy currents will be induced in the metal, and this produces an alternating magnetic field of its own. If another coil is used to measure the magnetic field (acting as a magnetometer), the change in the magnetic field due to the metallic object can be detected.

we are offering a public address systems (pa system) is an electronic amplification system with a mixer, amplifier and loudspeakers, used to reinforce a sound source, e.g., a person giving a speech, a dj playing prerecorded music, and distributing the sound throughout a venue or building.