Foreman Machine Tools Pvt. Ltd

Vavdi, Rajkot, Gujarat

We are a Manufacturer of "fmt: Brand Power Press Machines C-type & H-type from the Range of 05 Tons & 200 Tons. At "fmt". We Always Wel-come Orders for Any Press of Any Capacity & as per Your Drawing & Dimension. Kindly Contact Us.

Foreman Machine Tools Pvt. Ltd. Guillotine Shearing Machines have been designed & develop through structural analysis technique for continuous production, accuracy and repeatability.

FRAME:

Rigid Steel Frame of Kishan shears are optimally designed to avoid weak sections and is of interlocked design. The Ram is guided throughout its length by accurate machined guide ways ensuing proper clearance and clean out.

LUBRICATION:

All bearing parts and guide surfaces are lubricated through hand operated lubrication system.

CLUTCH, BRAKE & DRIVE:

Revolvig Key Cluth Iinked with the Main Gear engages every time when Fool Pedal Is pressed. Drive provided through V-Belt & all journals are fitted in Gun Metal Beanngs. Brake is adjustable and incorporated on end of Crack Shaft.

HOLD DOWN SYSTEM:

Hydraulic Hold Down Pads are actuated by Hydraulic Power Pake/ Cam Operated Pump. Hydraulic Hold Down Pads had the Sheet Securely to avoid slipping and bowing resulting in cean square cut .Hold Down this are Provided with oversize pads to avoid impressions on sheet metal on request.

BLADES:

Foreman Machine Tools Shears are provided with high qualty single segment (HcHc.r) Blades fa longer tool Life. Ease in assembIing of knife reduces down time, the shear Blades are four edged.

MECHANICAL BACKGAUGE:

This is a standard equipment proved Foreman Machine Tools Shears. Scale on the back gauge gives instantaneous reading of distance Between Shear and Back Gauge, thus avoiding was and maintenance encountered in electronic equipment.

POWER SUPPLY:

400/440 Volts, 3 Phase , 50 Cycles, All Dimensions Are in mm.

Foreman Machine Tools Pvt. Ltd. Guillotine Shearing Machines have been designed & develop through structural analysis technique for continuous production, accuracy and repeatability.FRAME:Rigid Steel Frame of Kishan shears are optimally designed to avoid weak sections and is of interlocked design. The Ram is guided throughout its length by accurate machined guide ways ensuing proper clearance and clean out.

foreman machine tools pvt. Ltd. Brand steel body geared & ungeared power operated shearing machine are designed and parallel sheet cutting. The machine is applicable to m. S., s. S., copper, brass, aluminum, crc, cr ngo, p. S. B. Etc.

cutting industries. It is also applicable to manufacturers of electric stamping, automobiles. Tin drum barrel, control panels and boards, steel furniture, tube light potties, fabricators & kitchenware items etc

side frames:

are of steel plates designed for maximum rigidity to eliminate deflection and to with stand continuous high speed performance atfull capacity

ram (upper beam):

is of solid steel plate and additional ribs on back side the ram adds to is strength, carrying the upper knife. Its maximum weight ensure lesser load on the bearing. The ram moves in accurate machined guide-woys to avoid deflection. For smooth running and maintains the proper strength of the upper knife.

table:

is of closed box type steel fabricated, which forms a rigid backbone for the shear and a solid backing for the lower knife. Additional ribs, under the table adds to its strength.

crank shaft & flywheel shaft:

is of best steel, accurately machined and runs in gun metal bearing and all other installed in gun metal bearings.

hold down:

is of steel fabricated spring loaded ensures uniform pressure through out the cutting length without any slipping irrespecti ve to the sheet.

rolling key clutch:

made of en-24 steel for positive engagements and continuous operation having three key way. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

drive:

is through "b" belts on the fly wheel and other chain of job cut gears for smooth running and longer life.

brake:

constant spring loaded adjustable brake is provided.

back gauge:

in ksml 5, 6, 7 &ksmh 4 to 7 are screw drive where as in ksug 1 to 4 &ksmh 1 to 3 am of rack pinion type designed to accuracy and easily.

standard equip:

side, back, front gauges and table extension, fly wheel and gear guards, foot pedal, mount and motor pulley, hold down divide, set of 4 edge hc hcr blade and manual oil pump for lubrication.

lubrication:

for sufficient lubrication oil cups and oil points are provided.

blade:

is four edged hc hcr provided for longer tool life.

Foreman Machine Tools Pvt. Ltd. Press Brakes ore designed and developed through years of experience in Sheet Metal working machines. Kishan Press Brakes are widely accepted in industries for continuous production runs and in areas requiring and repeatability coupled with high production.FRAME:Frame is of robust steel construction of rigid and interlocked design. It is strain-free and supports the Rom and Bed against undesired deflection under permissible load condition.