Forebros Tools Pvt Ltd.

Chhapraula, Ghaziabad, Uttar Pradesh

Bonded Abrasive is composed of an abrasive material contained within a matrix. Our range of Bonded Abrasives is widely used to cut ordinary metals, carbon steel, and hard bronze as per requirements. With a high tensile strength, these Bonded Abrasives are appreciated for having such great bending resistance. We are manufacturing and supplying Bonded Abrasives in India.

Non Woven Abrasives is a web of nylon fibers impregnated with abrasive grain that are bonded together with synthetic resins. These Non Woven Abrasives can be availed in different colors like red, black, etc. and ensure proper smoothening of metallic work pieces. Ideally these Non Woven Abrasives are preferred for industrial applications like cleaning, polishing and surface finishing.

Coated Abrasive Flap Wheels are wheel made from abrasives flaps radiating from centre metal hub. It has an increased flap count and is consequently used in aggressive cutting. Larger diameter of Coated Abrasive Flap Wheels also produces higher peripheral speeds that added to the stiffness and aggressive cutting and better contour finish. Coated Abrasive Flap Wheels are used by mounting in double sided or single sided bench grinder.

Warning & Safety Guide

• Extreme care should be used when operating any flap wheel.
• If a wheel disengages during use, it could cause serious injury to any unprotected body parts.
• Improper use of running flanges can cause a flap wheel to disengage and cause injury.
• All flap wheels must be run with a proper sized pair of running flanges one running flange on each flap wheel
• Do not use running flanges that are too small or too big!
• Running flanges should be the same diameter as the flapwheel center flange.
• Prior to installation examine product for defects.
• Arrows on side of the flapwheel should point in the direction of spindle rotation
• Excessive or unusual vibration would indicate the need for corrective action. Shut the   machine down immediately, determine the cause and correct the situation.
• Always use protective glasses and or face shields and hand gloves nb. For flap wheel operational speed, please contact our service engineer.

We are one of the most renowned Manufacturers and Suppliers of Coated Abrasive MOP Wheels in India. Coated Abrasive MOP Wheels are manufactured from improved abrasive cloth flaps bonded at the centre with a strong, flexible, resilient adhesive along with a metal spindle. Coated Abrasive MOP Wheels are also used by portable hand grinder.

Coated Abrasive Velcro Disc is circular in shape with or without holes. The backing of Coated Abrasive Velcro Disc is interlined with Velcro fabric. Coated Abrasive Velcro Disc is available in sizes of 127mm and 178mm in diameter. These Coated Abrasive Velcro Disc are used by high speed portable sanding tool.

We are one of the most prestigious Manufacturers and Suppliers of Coated Abrasive Rolls in India. These Coated Abrasive Rolls are considered fit for making abrasive belts. In addition, these Coated Abrasive Rolls are a specialty for WOD and steel grinding. Clients can avail these Coated Abrasive Rolls in different specifications (size, diameters, etc.) and grades as per their requirements.

Coated Abrasive Sanding Disc has a fiber backing and circular shape with a centre hole. The standard sizes of Coated Abrasive Sanding Disc are 100mm d x 16mm ch, 127mm d x 22mm ch, 178mm d x 22mm ch. Coated Abrasive Sanding Disc are effectively used by bolting to a rubber support pad on a right angle high speed portable grinder.

Safety Guide

• Start the tool just off the work piece and bring it up to full operating speed before you begin to grind or sand.
• Ease the disc into the work piece at a 5- to 10-degree angle to the work piece surface.
• Temperature and humidity are two very important environmental factors that influence fiber disc performance and safety. So do not store the disc in highly humid area or in excessive dry area.
• Look for and avoid any areas on the work piece where the disc may become caught or jammed.
• When grinding or sanding small, movable work pieces, secure these pieces to prevent them from moving when the disc makes contact with them.
• Grind or sand in well-ventilated areas.
• Direct away from your body and away from bystanders.
• Do not grind near flammable materials.
• Do not wear loose-fitting clothing. Use hand gloves
• Do not store or rest the grinder sander on the disc and pad.
• Do not put the grinder sander down until the disc has stopped rotating.
• If grinder sander is dropped, replace the backup pad and disc before using it again.
• Avoid body or any other unintended contact with the rotating disc or backup pad.
• If chatter or vibration occurs during use, stop the tool at once. Determine the cause of the problem and correct it before continuing.