Our Products
Iron Ore
2 Products availableMetal Alloys
1 Products availableLeading Manufacturer, Supplier & Retailer of Cobalt Metal, Nickel Metal, Tin Metal, zinc metal and Silicon Metal.
Cobalt is a shiny, brittle metal that is used to produce strong, corrosion and heat resistant alloys, permanent magnets and hard metals. It is one of the three naturally occurring magnetic metals (Iron and Nickel being the other two) and retains its magnetism at a higher temperature (2012°F, 1100°C) than any other metal. In other words, Cobalt has the highest curie point in all metals. Cobalt also has valuable catalytic properties.
Super Alloys ( such as satellite), are the largest consumer of Cobalt Metal, accounting for about 20% of demand. Predominantly made of iron, cobalt and nickel, but containing smaller amounts of other metals, including chromium, tungsten, aluminum and titanium, these high-performance alloys are resistant to high temperatures, corrosion and wear, and are used to manufacture turbine blades for jet engines, hard facing machine parts, exhaust valves and gun barrels.
Cobalt is also used to produce permanent magnets, such as samarium-cobalt magnets. Magnets account for 7% of Cobalt Metal demand and are used in magnetic recording media, electric motors, as well as generators.
Cobalt | Co % Min | Cu PPM | Cd PPM | Fe PPM | Ni PPM | Pb PPM | Zn PPM | Ca PPM | Mg PPM | Na PPM | Packing |
Cobalt Metal | 99.95 | <50 | <50 | <50 | <50 | <10 | 10 | 10 | 10 | 10 | 50 KG Bags/Drum |
Nickel is a metal with a bright future as it is the main alloying metal needed in the production of certain types of stainless steel. Two third of all nickel produced goes into stainless steel, to promote a stable, ductile, austenitic structure as well as contribute to corrosion resistance.
The strength and life span of products manufactured using stainless steel are superior to the ones produced using non-stainless steels.
Nickel is used to manufacture stainless steel mainly & other items as (Other steel grades, non ferrous alloys, aerospace & military applications, coins, electronics.etc)
Nickel | Ni% Min | C% Max | Co% Max | Cu%Max | Fe% Max | Pb% Max | S% Max | Zn% Max | Size | Packing |
Nickel Plate | 99.97 | 0.0001 | 0.0001 | 0.0002 | 0.006 | 0.00002 | 0.0007 | 0.00005 |
5-13 mm, 4 X 4 inch cut |
Bags/Drums |
Tin is an important commodity in international trade and is used in hundreds of industrial processes throughout the world. The industrial application of tin is in the following sectors: Solders - 32 %, Tin Plate - 27 %, Others - 17 %, Alloys - 14 %, P C Stabilizers - 6%, Tinning - 4%.
Tin is also used as a coating on the surface of other metals to prevent corrosion and provide low toxicity.
Tin is used to coat a number of products, including cans, containers & Packages.
We are offering Tin Metal as
Tin | Sn% Min | Ag% Max | Al% Max | As% Max | Bi% Max | Cd% Max | Co% Max | Cu% Max | Fe% Max | Pb% Max | Sb% Max | Zn% Max |
Tin Ingots/Bar | 99.97 | 0.0001 | 0.0001 | 0.0044 | 0.0002 | 0.0001 | 0.0002 | 0.0004 | 0.0023 | 0.0023 | 0.0057 | 0.0002 |
Zinc (chemical symbol - Zn) is a bluish white lustrous metal. It is normally covered with a white coating on exposure to the atmosphere.
Zinc is the fourth most common metal in use, after iron, aluminium and copper in terms of the metals annual production. The primary end use of zinc is in the galvanizing and coating sectors, which currently account for an estimated 57% and 16% of the total production respectively.
Zinc can be recycled indefinitely, without loss of its physical or chemical properties & is used to produce batteries, fuel cells, die casting & making brass.
Zinc is used to produce batteries, fuel cells, die casting & making brass.
Zinc | Zn%Min | Lead% Max | Cadmium% Max | Iron(Fe) % Max | Tin% Max |
Zinc Ingots | 98.5 | 1.4 | 0.15 | 0.07 | 0.02 |
Silicon is the most common metalloid. It is a chemical element, which has the symbol Si and atomic number 14. As the eighth most common element in the universe by mass, Silicon very rarely occurs as the pure free element in nature, but is more widely distributed in dusts, planetoids and planets as various forms of Silicon Dioxide (Silica) or Silicates. On Earth, Silicon is the second most abundant element (after oxygen) in the crust, making up 25.7% of the crust by mass.
Silicon has many industrial uses. Silicon is widely used in semiconductors because it remains a semiconductor at higher temperatures than the semiconductor germanium and because its native oxide is easily grown in a furnace and forms a better semiconductor/dielectric interface than any other material. Silicon is alloyed with aluminium for use in engines as the presence of Silicon improves the metals castability.
Silicon can enhance irons magnetic properties. It is also an important component of steel, which is toughens
Silicon Metal | Si % Min | Fe% Max | Al% Max | Ca% Max | Size | Packing |
2202 Grade | 99 | 0.2 | 0.2. | 0.02 | 10-50/80/100 mm | 1MT Big Bag |
3303 Grade | 99 | 0.3 | 0.3 | 0.03 | 10-50/80/100 mm | 1MT Big Bag |
441 Grade | 99 | 0.4 | 0.4 | 0.1 | 10-50/80/100 mm | 1MT Big Bag |
553 Grade | 98.5 | 0.5 | 0.5 | 0.3 | 10-50/80/100 mm | 1MT Big Bag |
We bring a comprehensive range of high standard Chrome Manganese. These sturdy and corrosion resistant Chrome Manganese is used in stainless steel. The essential property of Chrome Manganese is their high fabricability and resistance to corrosion. Our range of Chrome Manganese is offered in different grades and compositions.
Chrome Manganese Metal | Cr % Min | Mn % Min | Si% Max | C % Max | P % Max | S % Max | Al % Max | N% Max | Size | Packing |
Cr46Mn17 Grade | 46 | 17 | 2 | 0.05 | 0.04 | 0.05 | 0.1 | 6 | 10-100 mm | 1MT Big Bag |
Cr53Mn23 Grade | 50/55 | 20/25 | 2/3 | 0.05 | 0.04 | 0.05 | 0.1 | - | 10-100 mm | 1MT Big Bag |
Magnesium is a chemical element with the symbol Mg, atomic number 12, atomic weight 24.3050 and common oxidation number +2. Magnesium Metal is an alkaline earth metal that has the symbol Mg in the periodic table of elements. Magnesium metal is a fairly strong, silvery-white, light-weight metal (one third lighter than aluminum) that slightly tarnishes when exposed to air. Magnesium is traditionally produced in ingot form of approximately 7kg each having the purity as 99.9%.The main applications of Magnesium is, in die casting (alloyed with Zinc), to remove sulfur in the production of iron and steel, the production of titanium in the Kroll process.