GST : 33AADFF1640A1ZB
Verified
Write a Review
Our Products
Solar Water Heater
2 Products availableDryers
2 Products availableWater Heaters
2 Products availableIndustrial Heaters
1 Products availableFreeze Drying Equipment
1 Products availableSolar Lightings
1 Products availableSolar Pump
1 Products availableSolar Power Plants
1 Products availablePower Plant
1 Products available
Evacuated tubes are the absorber of the solar water heater. They absorb solar energy converting it into heat for use in water heating. Evacuated tubes have already been used for years in Germany, Canada, China and UK. There are several types of evacuated tubes in use in the solar industry. At Sunlit, we use the "Twin-Glass Tube" technology. This type of tube is chosen for its reliability and better performance.
Usage
| Capacity | No.of Persons | Utility Points |
|---|---|---|
| 100 LPD | 3-4 Persons | 1-2 points |
| 200 LPD | 5-6 Persons | 3-4 points |
| 300 LPD | 6-8 Persons | 5-6 points |
| 500 LPD | 10-12 Persons | 7-8 points |
Catalogue
Solar hot water system is based on the principle of black body absorption. The black surface of the collector absorbs the heat energy from the sun rays and transfer it to the water passing through the copper tubes. Hot water being lighter in density, raised to the insulated storage tank and equal amount of cold water replaces this hot water from the copper tubes.
Insulated Storage Tank
| Inner Tank Material | Stainless Steel 304 / GI |
|---|---|
| Outer Tank material | Aluminum Stucco |
| Tank Capacity | Customized to Customer Requirement |
| Inlet/Outlet Pipe | Stainless Steel |
| Tank Welding | Tig Welding / Mig Welding |
| Filler Material | Stainless Steel |
| Thermal Insulation | Rock Wool / PUF |
| Heat Retention | 72 hours |
Catalogue
Sunlit Solar is an experience solution provider for Solar pumping systems. Pumping water is in great demand by farmers or in remote areas where there is no power grid systems. It is one of the sensible and effective uses of solar electric power. With our engineering expertise, Sunlit Solar is ready to take on your water pumping needs, with the use of green energy and affordable cost. Solar PV pumping systems are widely used in remote areas and islands for water supply, agriculture irrigation, they can also be used in industry, agriculture industry, and water treatment works. The PV pumping system consists of solar panel array, an inverter PCU and submersible pump. And solar pumping inverter PCU is the controlling center.
PV arrays absorb sunlight radiation energy, convert it into electricity. Pumping inverter control and regulate the operation of the System. It transforms DC power generated by PV arrays into 3- phase AC power, and then drives the submersible pump. In accordance with changes of real-time solar radiation intensity, the inverter can adjust the output frequency, to achieve the Maximum Power Point Tracking function(MPPT).
Available Models
| Model | 3 HP | 5 HP | 7.5 HP | 10 HP |
|---|---|---|---|---|
| Watts of Module | 3000 W | 5000 W | 7500 W | 10000 W |
| Pump Inverter | 2.2 KW | 3 KW | 5 KW | 7.5 KW |
| Module Type | Poly Crystalline IEC Certificated | |||
| Connector | MC-4 Connectors | |||
| Mounting Structure | Mild Steel with Automatic Painted | |||
Technical Specifications
| Motor Pump | 2.2kw / 3 hp / 400v | 3kw / 5 hp / 400v | 5kw / 7.5 hp / 400v | 7.5kw / 10 hp / 400v |
|---|---|---|---|---|
| VFD Capacity | 2.2kv / 400v | 3kv / 400v | 5kv / 400v | 7.5kv / 400v |
| AMPS | 7 AMPS | 10 AMPS | 13 AMPS | 18 AMPS |
| Operating DC Voltage | 500 - 800v DC | |||
| Recommended PV Rating | 700v DC | |||
Catalogue
Solar hot water system is based on the principle of back body absorption. The black surface of the collector absorbs the heat energy from the sun rays and transfer it to the water passing through The copper tubes. Hot water being lighter in density, raised to the insulated storage tank And equal amount of cold water replaces this hot water from the copper tubes.
Catalogue
Available Models
| Models | 100LPD | 200LPD | 250LPD | 300LPD | 500LPD |
|---|---|---|---|---|---|
| No. of Collector | 1 Nos | 2 Nos | 2 Nos | 3 Nos | 4 Nos |
| Heater Coil | Optional | ||||
| Utility Points | 1-2 | 4 | 5 | 6 | 8 |
| No. of Persons | 3-4 | 6-8 | 8-10 | 10-12 | 12-15 |
| Temperature | 50-60 Deg. C | ||||
SUNLIT Solar tunnel Drier is an enclosed chamber which is used for drying of various crops using Green House effect. It helps to preserve the food and also increase the shelf life of the product. It is covered with multi wall Polycarbonate sheet which traps solar energy and has an insulation effect, thereby maintaining high temperature for a longer period of time. Further solar tunnel drier filters out the UV radiations which help products to retain the nutrients, hygiene and colour.
Solar hot water system is based on the principle of black body absorption. The black surface of the collector absorbs the heat energy from the sun rays and transfer it to the water passing through the copper tubes. Hot water being lighter in density, raised to the insulated storage tank and equal amount of cold water replaces this hot water from the copper tubes. From solar water heater, we can increase the temperature to the maximum of 95 deg. Industries like Textile, Hotel, Rubber and Dairy industries as already in use of boiler for generating steam. The hot water can be used as a pre heated water for boiler. Conventional fuels like LPG, Diesel, Firewood, etc., can be saved at 30% to 40% on their daily consumption.
Evacuated tubes are the absorber of the solar water heater. They absorb solar energy converting it into heat for use in water heating. Evacuated tubes have already been used for years in Germany, Canada, China and UK. There are several types of evacuated tubes in use in the solar industry. At Sunlit, we use the "Twin-Glass Tube" technology. This type of tube is chosen for its reliability and better performance.
A heat pump is an electrical device that extracts heat from one place and transfers it to another. A compressor pumps the refrigerant between two heat exchanger coils. In one coil, the refrigerant is evaporated at low pressure and absorbs heat from its surroundings.
Dehydration means the process of removal of moisture by the application of artificial heat under controlled conditions of temperature, humidity, and an flow. Dehydration is a complex mechanism as this involves simultaneous exchange of moisture and heat. The relationship between the moisture content and temperature of the air during the drying process is referred to as 'psychometric' relation.
Drying or dehydration removes biologically active water thus stopping the growth of micro organisms. This also results in a reduced rate of enzyme activity and chemical reactions. The processing should be done in such a way that the food value, natural flavor, and characteristic cooking quality of the fresh material are retained after drying. Fruits are considered to be dry when they show no sign of moisture or stickiness when held firmly in the hands. Vegetables is considered to be dry when they become brittle. The residual moisture in the vegetables should not be more than 6 to 8 percent and in fruits 'I 0 to 20 percent.
Benefits : Accurate temperature control Energy saving. Even Heating 70%° Cheaper than any other sources of heating No Toxic gases
Details
| Model | FES-50 | FES-100 | FES-300 | FES-500 |
|---|---|---|---|---|
| Capacity | 50 kg/Batch | 100 kg/Batch | 300 kg/Batch | 500 kg/Batch |
| Moisture Removal | 8-10 kg/hr | 6-8 kg/hr | 18-25 kg/hr | 30-40 kg/hr |
| Power | 2 Kw | 3 kW | 7 kW | 10 kW |
Catalogue
SUNLIT Solar tunnel dryer is an enclosed chamber which is used for drying of various crops using Green House effect. It helps to preserve the food and also increase the shelf life of the product. It is covered with multi layer Polycarbonate sheet which rraps solar energy and has an insulation effect, thereby maintaining high temperature for a longer period of time. Furter solar tunnel dryer filters out the UV radiations which help products to retain the nutrients, hygiene and colour.
Features
• Auto Exhaust Fan
• Simple In Fabrication And Installation.
• Maximum Mean Temperature Inside The Dryer Is 55-60 Deg C With Mean Temperature At 30 Deg C.
• Dryingtime Is 40% Lesserthan Normal Open Sun Dry Method.
• The Product Is Protected From Rain, Insect, Dust, Birds And Rodent Proof.
• The Product Can Be Left In The Dryer Overnight Or During Rain.
Electrical back provided on request for rainy and cloudy days.
Product Can Be Dryed
• Copra
• Spices
• Vegetables And Fruits
• Chillies
• Amla - Nuts
• Herbal Raw Materials
Additional Information:
Payment Terms : T/T
Packaging Details : CUSTOMIZED ACCORDING THE SIZE
Delivery Time : 15 TO 30 DAYS
SUNLIT Solar LED Street Lights comes with inbuilt charge controller. It is driven with latest technology LED driver with charge controller which enables dimming and auto dusk to dawn operation. The product is indigenously designed with Cast Aluminium Fixture which also act as a heat sink enabling faster head dissipation and longer LED life. The luminary is designed for ingress protection and it confirms to IP 66 Rating.
Technical Data
| Models / Watts | 15 | 25 | 40 |
|---|---|---|---|
| Watts of Module | 75 | 100 | 150 |
| Battery Capacity / WH | 20 AH | 30 AH | 50 AH |
| Pole | 15 Feet | 20 Feet | |
| Working Hours | 12 Hrs (Dusk to Dawn) 5 Hrs Full Bright / 7 Hrs Dimming | ||
Catalogue
Mr. Jagdish Kumar (Focusun Energy Systems)
No. 27, Dr Jaganathan Nagar, Opp. To CMC, Avinashi Road, Coimbatore, Tamil Nadu - 641014
https://www.focusunsolar.co.in
Share us via
View Contact Number 
