Write a Review
Our Products
Air Compressors, Accessories & Parts
2 Products availableJigs, Casting Dies, Die Casting Moulds & Moulding Tools
2 Products availableAir Compressor
2 Products availablePlastic Component
2 Products availableGaskets
2 Products availableIndustrial Seals
2 Products availableNatural And Synthetic Resin
1 Products availableValves & Valve Fittings
1 Products availablePistons
1 Products availableOur Complete range of products are Urethane Seals, PTFE FILLED PTFE MOULD/STOCK SHAPES, CARBON FILLED PTFE BEARING ELEMENT and TURCITE EQUIVALENT MATERIAL.
we are offering ptfe envelope gasket. Ptfe envelope gasket excels at sealing irregular surfaces and maintaining a tight seal under demanding processing and system conditions.
it excels at sealing irregular surfaces and maintaining a tight seal under demanding processing and system conditions.
typical applicationsthis material is recommended for gaskets used in flange sealing duties in steel pipes and equipment for pharmaceutical, food and beverage processing.
suitable for pharmaceutical, food and beverage processing duties.resistant to creep and cold flow.maintains a reliable, durable seal.dimensionally stable.conforms easily - seals irregular flanges.retains tightness - minimum re-torque.documented lot traceability.
specifications :usp class vl biocompatibility.us food contact compliance: fda 21 cfr 174.5(d).eu food contact compliance:
chemical properties :resistant to all media in the range ph 0-14, excludingalkali metals and elemental fluorine, particularlyat elevated temperatures.
notes:temperature stability: expanded ptfe is stable in temperature ranges typically found in food and pharmaceutical applications: -100c to +270c with excursions to +315c (-148f to +518f with excursions to +600f).
how supplied:standard thicknesses: 1.5mm & 3.0mm. Standard sheet size: 1524mm x 1524mm.
we offer ptfe gasket. Ptfe gaskets are available in raise face size & full face size. Ptfe gaskets are also available as per client drawing specification.gasket are available in 1.5 mm, 2 mm & 3 mm, 4 mm, 5 mm thick. Gaskets are manufactured to suite different flange standard like; e/f table, ansib-16.5-150, 300 & 600. Class flange, din standard flanges from 1/2 nb (15nb) to 28 nb. Ptfe gaskets are available in raise face size & full face size. Ptfe gaskets are also available as per client drawing specification.
We are one of the well-reputed and established manufacturers and suppliers of an high quality array of PTFE Compressor Parts. These are manufactured using superior quality material which ensures durability.The filled Teflon (PTFE) that we process are suitable for serving nearly every identifiable market at both the OEM and after-market levels. These can also beemployed by plastics distributors and machine shops thatserve OEM's. The Parts display exemplary performancecharacteristics and have a long service life even undercritical conditions.
Piston Rings
Wearing Rings
Rider Rings
Seal Rings
Bearing Rings
Gland Packing
Shaft Bearing
We are one of the well-reputed and established manufacturers and suppliers of an high quality array of PTFE Compressor Parts. These are manufactured using superior quality material which ensures durability.The filled Teflon (PTFE) that we process are suitable for serving nearly every identifiable market at both the OEM and after-market levels. These can also beemployed by plastics distributors and machine shops thatserve OEM's. The Parts display exemplary performancecharacteristics and have a long service life even undercritical conditions.
Piston Rings
Wearing Rings
Rider Rings
Seal Rings
Bearing Rings
Gland Packing
Shaft Bearing
PTFE Rod is often chosen to produce bearings because of its very low friction and also for its free running ability. Because of its ability to conform to shape otherwise known as flow, PTFE Rod is used for seals in valves, this is because it can conform to shape and create a high specification valve seal.
PTFE Rod can easily be machined but due to the surface softness, care must be taken in lathe jaws or high compressive loads, which may cause distortion
Another important element to remember regarding PTFE Rod is the coefficient of expansion due to heat changes; this can be uneven with PTFE and may cause distortion in components.
PTFE Rod is manufactured in two distinct ways, extruded PTFE Rod is the most popular and is relevant to smaller sizes, Molded PTFE Rod is relevant to the diameters over 100mm in size, smaller sizes are also available in extruded form.
Size : PTFE Rod is often made in diameters ranging from 3mm diameter up to a maximum diameter of 300mm diameter and is made in lengths which range from 100mm to 1000mm
PTFE Rod is often chosen to produce bearings because of its very low friction and also for its free running ability. Because of its ability to conform to shape otherwise known as flow, PTFE Rod is used for seals in valves, this is because it can conform to shape and create a high specification valve seal.
PTFE Rod can easily be machined but due to the surface softness, care must be taken in lathe jaws or high compressive loads, which may cause distortion
Another important element to remember regarding PTFE Rod is the coefficient of expansion due to heat changes; this can be uneven with PTFE and may cause distortion in components.
PTFE Rod is manufactured in two distinct ways, extruded PTFE Rod is the most popular and is relevant to smaller sizes, Molded PTFE Rod is relevant to the diameters over 100mm in size, smaller sizes are also available in extruded form.
Size : PTFE Rod is often made in diameters ranging from 3mm diameter up to a maximum diameter of 300mm diameter and is made in lengths which range from 100mm to 1000mm
MOULD PTFE ALSO FAMOUS AS PTFE STOCK SHAPES.
WE CAN PROVIDE PTFE MOULDS/MOULDING RANING FROM 10MM ID TO 1000MM OD.
WE CAN PROVIDE PTFE MOULDS/MOULDING RANGING FROM UPTO 300MM HEIGHT.
VIRGIN PTFE
VIGIN PTFE (MODIFIED)
15% GLASS FIELD PTFE
25% GLASS FIELD PTFE
25% CARBON FIELD PTFE
35% CARBON FIELD PTFE
40% BRONZE FIELD PTFE
60% BRONZE FIELD PTFE
55% BRONZE + 5% MOLY. FIELD PTFE
MANY GRADES EQUIVALENT TO ROLON.
GRADES EQUIVALENT TO TURCITE, TURCON ETC.
MOULD PTFE ALSO FAMOUS AS PTFE STOCK SHAPES.
WE CAN PROVIDE PTFE MOULDS/MOULDING RANING FROM 10MM ID TO 1000MM OD.
WE CAN PROVIDE PTFE MOULDS/MOULDING RANGING FROM UPTO 300MM HEIGHT.
MATERIALS WHICH WE CAN SERVE ARE AS PER BELOWVIRGIN PTFE
VIGIN PTFE (MODIFIED)
15% GLASS FIELD PTFE
25% GLASS FIELD PTFE
25% CARBON FIELD PTFE
35% CARBON FIELD PTFE
40% BRONZE FIELD PTFE
60% BRONZE FIELD PTFE
55% BRONZE + 5% MOLY. FIELD PTFE
MANY GRADES EQUIVALENT TO ROLON.
GRADES EQUIVALENT TO TURCITE, TURCON ETC.
>PTFE Sheet is often chosen for very low friction sideways and wears blocks.
PTFE Sheets can provide very low resistance with mating components to offer a free running sideway surface requiring minimal momentum to move products or components.
PTFE Sheet is also used in lining of cryogenic chambers due to its excellent and rare ability with very low temperatures.
applications include shims or gaskets for external use; this is because PTFE Sheet is highly resistant to weathering and any environmental long term effects.
PTFE Sheets are available in two form Molded & Skived. Molded Sheets are commonly known as Rigid Sheets and Skived sheets are known as flexible or thin sheets.
Molded PTFE Sheet is generally available in sheet sizes of 300mm, 400mm, 450mm, 600mm, 1000mm, 1200mm, and 1500mm and in thickness ranging from 0.25mm up to a usual maximum of 100mm with many interspaced range of sizes to suit customers requirements.
carbon has good chemical resistance to corrosive environments. It exhibits good initial wear and rubbing or sliding contact characteristics, both dry and water applications. It is frequently used in piston rings to reduce cylinder wall wear by entrapping abrasive foreign particles in their relatively soft surfaces.
application
pump housings
valve seats
gaskets
roller coverings
shaft bearings
filter housings
etching plates
shaft seals
slide runners
Manufacturer & Exporter of a wide range of products which include Air Compressors such as Air Cooled Compressors, Lubricated Compressor, Screw Air Compressors, High Pressure Air Compressors, Reciprocating Air Compressors, Piston AirCompressors and many more items.
Air compressors are the equipments which are used in several mechanical systems to convert the power from electric motor or diesel motor into kinetic energy by compressing the air to highly pressurized levels. These aircompressors are being manufactured at our company using very tough andtensile quality raw materials and in an excellent finishing which retains itsreliability for a long term use. We are offering these air compressors to ourclients at a very reasonable and conventional range of prices in each and everypart of the country as well as in several other countries also.
Easily affordable
Reliable and trusted
Superb efficiency
Long lasting
Low consumption
Manufacturer & Exporter of a wide range of products which include Air Compressors such as Air Cooled Compressors, Lubricated Compressor, Screw Air Compressors, High Pressure Air Compressors, Reciprocating Air Compressors, Piston AirCompressors and many more items.
Air compressors are the equipments which are used in several mechanical systems to convert the power from electric motor or diesel motor into kinetic energy by compressing the air to highly pressurized levels. These aircompressors are being manufactured at our company using very tough andtensile quality raw materials and in an excellent finishing which retains itsreliability for a long term use. We are offering these air compressors to ourclients at a very reasonable and conventional range of prices in each and everypart of the country as well as in several other countries also.
Features:Easily affordable
Reliable and trusted
Superb efficiency
Long lasting
Low consumption
quite simply turcite is ptfe impregnated with fillers and additives that serve to enhance the wear properties of the material.
it is used, most often in a sheet form, in thicknesses ranging from 0.5mm (0.02) to 4mm (0.16), although in some applications, it is also used as a bush and in more rare applications it is used as a thick plate.
being based on ptfe, the material cannot be extruded like a normal plastic sheet and instead needs to be skived the process most commonly used to make thin ptfe sheets.
also, the material will not easily adhere to other surfaces another feature resulting from its ptfe base.
therefore a chemical etching is required on one surface of the material, so the sheet can be bonded to other articles.
planers,
milling machines
spms
sharper's, horizontal & vertical boring machines,
hydraulic & pneumatic power presses,
press brakes,
all types of grinders,
radial drills,
automatic screw machines,
gear hobbers,
gear shapers.
Keyur Shah (Fluoroplast Engineers Private Limited)
5/2, Dashrath Estate, Nr. Revabhai Estate, C.T.M. Cross Road, CTM, Ahmedabad, Gujarat - 380026, India
Share us via
