Our Products
We are leaders in the market for providing best range of rotary twin gear pump, Rotary Gear Pump, Bitumen Jacketed Gear Pump, Lubrication Oil Gear Pump and Rotofluid Ms Gear Pumps
Pump Selection
Part | Material For FTRN / FTRX | Material For FTRB |
Pump Body | CI/CS | CI/CS |
Front Cover | CI/CS | CI/CS |
Back Cover | CI/CS | CI/CS |
Gland Cover | CI/CS | CI/CS |
Rotor & Stator Shaft | EN-19 | EN-19 |
Gear | EN-24/EN-353 | EN-24/EN-353 |
Bush/Needle Bearing | INA/IKO [Japan] | Non-Ferrous |
Wear Plate | Non-Ferrous | Non-Ferrous |
Lifting Hook | Mild Steel | Mild Steel |
R.V. Housing | Mild Steel | Mild Steel |
R.V. Piston | EN-8 | EN-8 |
R.V. Spring | Spring Steel | Spring Steel |
R.V. AD. Screw | EN-8 | EN-8 |
Sealing | 'GFO' Teflone/Mechnical Seal | "GFO" Teflone/Mechnical Seal |
Key | EN-8 | EN-8 |
Dowel Pin | EN-31 | EN-31 |
Hex - Bolt | Mild Steel | Mild Steel |
Fluid Tech Systems offer ROTOFLUID brand gear pump Model FT (Rotary Gear Pumps) which is self priming, foot mounting type positive displacement rotary gear pump. Model FT having simple two pieces Cast Iron construction which is single helical modified profile carton steel gear shrink fitted on alloy steel hardened and grind finished shaft as gear firmly supported 4 nos. of self lubricated sintered bronze bush bearing which ensure smooth running. These pumps can be run in either direction with change in inlet-outlet port position. The relief valve operations can be reversed by simply changing the R.V. parts on opposite side.
The suction and delivery connections are available in 1/4" to 3" sizes. These pumps can be operated up to pressure of 10 kg/cm with 5 LPM to 500 LPM flow capacity. These pumps are designed to run at 1440 RPM up to viscosity of 50, 000 to 1, 00, 000 SSU and maximum temperature up to 200c. It is desirable to reduce speed for size above 1" performance at low speed is always advantageous as it improves efficiency, reduce noise level and enhances operational life. The capacity will reduce in proportion to the speed.
Part | Material For Standard | Material For H.T. |
Body | IS.210 FG 220 C.I. Grade | IS.210 FG 220 C.I. Grade |
Back Cover | IS.210 FG 220 C.I. Grade | IS.210 FG 220 C.I. Grade |
Gland Cover | IS.210 FG 220 C.I. Grade | IS.210 FG 220 C.I. Grade |
R.H. & L.H. Gear | EN-8 | EN-24 [H. Nitrated] |
Rotor/Stator Shaft | EN-19 | EN-19 |
Bearing[Bushes] | Non Ferrous Sintered Bronze | Non Ferrous Sintered Bronze |
Sealing | Neoprene oil Seal / Mechanical seal | “GFO” Pack Teflon / Mechanical Seal |
R.V. Cap | Aluminum | Aluminum |
Key for coupling | EN-8 | EN-8 |
Fluid Tech Systems offers "ROTOFLUID" brand gear pump Model "FTDP" (Bitumen Jacketed Gear Pump , Bitumen Transfer Gear Pump , Jacketed Gear Pump) is a jacketed type foot mounted rotary gear pump. This model are specially designed for Bitumen. Model "FTDP" having S.G.I.N. cast jacketed construction of pump casing and gear & shaft are firmly supported 4 nos. Of self lubricated sintered bronze bush bearing which ensures smooth running. The sealing is done with "GFO" pack Teflon which can sustain high temperature up to 200C.This model should be selected for liquid which tend to solidify at room temperature, because it have jacketing construction to facilitate the heating of the pump by steam or thermic fluid. The pumps are available in size (1 " & 2") with thread end connection at suction & delivery. This pump are designed to run at 100 to 500 RPM.