Fluidics Engineers Private Limited

Saravanampatti, Coimbatore, Tamil Nadu

Pressure Line Filters

The Pressure Line Filters is an essential part in most hydraulic systems. When the hydraulic components are sophisticated, with close tolerances and a regulation function (not simply that of control) the use of filters in the pressure lines is a must.

Thanks to the advanced technological features of the filter materials and the controlled production system used to manifacture the filter elements, UFI pressure filters ensure the fluid cleanliness to be within the required values thus giving protection against faulty operation or machine downtime. For these reasons, the specification of UFI pressure filters represent the best protection for your investment.

OFF-LINE FILTERS

UFI Hydraulic Division OFF-LINE FILTERS take care of the efficiency and guarantee the long life of the system by keeping the oil at the desired cleanliness values.

Filtration Units are used to maintain “Roll-Off-Cleanliness” in the hydraulic- fluid circuit at the time a new vehicle leaves the manufacturing assembly-line or a vehicle undergoes repair or re-build.

The circuit can be cycled to flush out and remove harmful contamination to pre-condition the oil for longevity and improved service-life. Off-line filters maintain the desired cleanliness level.

TRANSMISSION FILTERS

In machines with a hydrostatic drive and combined working hydraulic system, return-suction filters replace the suction or pressure filters previously required for the feed pump of the closed-loop hydrostatic drive circuit as well as the return filter for the open-loop working hydraulic circuit. While each circuit operates independently with separate filters, the combination of the two circuits via the return-suction filter causes interaction between the circuits.

Tank Top Return Line Filter

 These tank top return line filters are used to improve the reliability of a lube or hydraulic system to eliminate failure due to contamination. This can be mounted directly on the tank top and they provide the optimum removal of contaminate from the system.

Features

• Built in by-pass check valve setting at 1.05 Kgf/cm2.
• Powerful ceramic magnets fixed on the filter head attracts
• iron particles, it increases pump and system life.
• Suitable for petroleum and mineral based oils.
• High grade impregnated paper element.

Filler Breather with Strainer

These filler breather with strainer are used to trap contaminates or a foreign particles enter in to hydraulic system from air and fluid while filling oil into hydraulic tank. This can be directly mounted either on tank top or side of tank.

Features

• Excellent dirt holding capacity due to special filtration media used.
• 40 micron element standard.
• Combination unit for filtering air passing in to the tank and straining oil while filling the tank.
• Synthetic element.