fluid-o-matic

Sector 60, Noida, Uttar Pradesh

The Single Stage Battery Cutting Machine, which we offer, is known for its sturdy make and long-life. We offer the Single Stage Battery Cutting Machine at the market leading to the clients. Low maintenance cost and ease-of-installation are the high points of these Single Stage Battery Cutting Machines. Construction : This machine has an automatic conveyor. Battery is placed on the conveyor. Width of Battery, need not to be set. It can accommodate Battery up to Max. Width of 305mm. Most of Batteries are below this. Cutting height can be set by turning Rotary wheel. This wheel is visible in picture of machine. Scale is provided to set the height of cutting from bottom. Conveyor takes the Battery in machine for cutting. During Cutting of Battery dust is confined inside of covers because cutter is enclosed. Operation : Normally Cutting is set at sealing line of lid. Max. of Automotive Batteries have approximately same height, say +-10 mm. Remaining Battery will come out of machine on Conveyor. This saves exposure of workman from Lead Dust; increases efficiency of organization reduces lead time as well as increases liquidity of Funds. Plastic Containers can be sent for immediate disposal/recycling facility. Lead Dust is confined inside enclosure at the same time water jets are provided by pre-fitted Pump. Water is collected in the bottom tank. This helps to separate Plastic Dust from Lead dust. Plastic dust floats and lead dust is precipitated at the bottom. Hence, it becomes environmentally Sound Method to cut the Battery for further separation. Remember this Cut Battery can directly go to another attachment; we call it Acid Draining.

 

We, hailing from Noida (Uttar Pradesh, India), are the credible Manufacturer, Supplier and Exporter of the best-in-class Single Stage Battery Cutting Machines worldwide. Engineered in compliance with the industry-stated standards, the Battery Slicer (Single Station) is acclaimed for its innovative designing and never-failing function. The durability is lifted up by using graded material in the fabrication. Available in diverse specifications, these Machines are nominally priced by us.

 

Specifications :

• Out Put Capacity : Two to Two and Half Ton/ Hour.
• Power Requirement : 6 Kw, 440 Volt, 3 Phases, 50 Hz.
• Man Power Requirement : Two no. unskilled Labor
• Operational Expenses for battery Breaking per ton : $ 1.75/ Ton approx

 

Description :

• This Machine has One Conveyor, One Cutting Stations with one Bend Saw Blade. Conveyor is used to feed the batteries into machine and Cuts off batteries at required height, as set by the operator. Blade is water cooled. After Cutting operation, Cut batteries are transported out of the machine by conveyor. Cut (Sliced Off) Top of battery is ejected out automatically.
• Maximum Height of batteries can be fed to the machine is 600mm and width being 305mm.
• Fume are collected and restricted by the Enclosed Body of Machine. No human exposure is involved in Cutting operation.
• Exposure of acid fumes and lead meet best environmental practices in the world
• No. Adjustment of Width is required.

 

Operation of Machine :

• Batteries are placed on the moving conveyor. Top of Batteries is sliced off by high Speed Bend Saw. There is one Bend Saw with height adjustment to set Cutting (Slicing) Height. Height is set manually.
• Output of Machine is one Slice of Battery Top and Remaining part of Battery. Acid Drained out in to Acid tank.

 

Size of Machine : 2200 mm (H) X 2200 mm (B) X 3650 mm (L) Approx.

We offer the clients premium Double Stage Battery Cutting Machine at the best. Also, these Double Stage Battery Cutting Machines are manufactured in confirmation to the defined industrial standards. We are among the trusted sources to procure these Double Stage Battery Cutting Machines. Construction : This machine has an automatic conveyor. Battery is placed on the conveyor. Width of Battery, need not to be set. It can accommodate Battery up to Max. Width of 305mm. Most of Batteries are below this. This machine has two Blades for Cutting. Cutting heights of both the blades can be set at independent height by turning Rotary wheel. This wheel is visible in picture of machine. Scale is provided to set the height of cutting from bottom. Conveyor takes the Battery into machine for cutting. First cutting is set normally at sealing line of lid and Second cutting is set below strap. Operations : During Cutting of Battery dust is confined inside of covers because cutter is enclosed. Maximum of Automotive Batteries have approximately same height, say +-10 mm. Cut Lid ejected out of first window and Strap portion of battery ejects out form second window. Remaining Battery will come out of machine on Conveyor. Machine can be provided with wheels so machine is used to unload battery at the same time cutting is performed. This saves exposure of workman from Lead Dust; increases efficiency of organization reduces lead time as well as increases liquidity of Funds. Plastic Containers can be sent for immediate disposal/recycling facility. Lead Dust is confined inside enclosure at the same time water jets are provided by pre-fitted Pump. Water is collected in the bottom tank. This helps to separate Plastic Dust from Lead dust. Plastic dust floats and lead dust is precipitated at the bottom. Hence it becomes environmentally Sound Method to cut the Battery for further separation. Remember this Cut Battery can directly go to another attachment; we call it Acid Draining.

The Triple Stage Battery Cutting Machine, which we offer, is manufactured in confirmation to the established industrial standards. We are amongst the reliable Sources to source these Triple Stage Battery Cutting Machines. Also, this Triple Stage Battery Cutting Machine is manufactured using the leading-edge technology. Details

• This machine has an automatic conveyor
• Battery is placed on the conveyor
• Width of Battery, need not to be set
• It can accommodate Battery up to Max. Width of 305mm (Most of Batteries are less than this)
• This machine has three Blades for Cutting
• Cutting heights of all the three blades can be set at independent heights by turning Rotary wheel (This wheel is visible in picture of machine)
• Scale is provided to set the height of cutting from bottom. Conveyor takes the Battery into machine for cutting.
  • First Cutting is set above lid so any battery which has more height than normal automotive batteries like Standby Batteries i.e. IT-500, Jumbo, etc. will be cut and that portion ejects out from first window
  • Second Cutting is set normally at sealing line of automotive battery lid and third cutting is set below strap. During Cutting of Battery dust is confined inside of covers because cutter is enclosed. Max. Of Automotive Batteries have approximately same height, say +-10 mm. Cut Lid ejected out of first window and Strap portion of battery ejects out form second window. Remaining Battery will come out of machine on Conveyor. Machine can be provided with wheels so machine is used to unload battery at the same time cutting is performed.
• This saves exposure of workman from Lead Dust; increases efficiency of organization reduces lead time as well as increases liquidity of Funds. Plastic Containers can be sent for immediate disposal/recycling facility.
• Lead Dust is confined inside enclosure at the same time water jets are provided by pre-fitted Pump.
• Water is collected in the bottom tank
• This helps to separate Plastic Dust from Lead dust. Plastic dust floats and lead dust is precipitated at the bottom. Hence it becomes environmentally Sound Method to cut the Battery for further separation. Remember this Cut Battery can directly go to another attachment; we call it Acid Draining.

 

Situated in Noida (Uttar Pradesh), we have built a wealth of reputation for manufacturing, supplying and exporting the superior-grade Triple Stage Battery Cutting Machines across the globe. Attainable at market-leading prices, the Battery Slicer (Triple Stage) is distinguished for its hassle free functions for a long span without much upkeep. For utmost gratification of the clients, we dole out quality-tested Battery Cutting Machines in tailored specifications.

 

Specifications :

• Out Put Capacity : Two to Two and Half Ton/ Hour.
• Power Requirement : 16 Kw, 440 Volt, 3 Phases, 50 Hz.
• Man Power Requirement : Two no. unskilled Labor
• Operational Expenses for battery Breaking per ton : $ 2.10/ Ton approx

 

Description :

• This Machine has One Conveyor, Three Cutting Stations with one Bend Saw Blade each. Conveyor is used to feed the batteries into machine and Cuts off batteries at three respective set heights, as set by the operator. Blades are water cooled. After Cutting operation, Cut batteries are transported out of the machine by conveyor. Cut (Sliced Off) Top of battery is ejected out automatically from first window and Connection Strap and part of Container from Second Window and third blade as stand by so during slicing off if one of the blade become blunt then another station is utilized and production is not interrupted. Other option is if Bigger battery with more height is fed then it can be sliced off into four Pieces.
• Maximum Height of batteries can be fed to the machine is 600 mm and width being 305 mm.
• Fume are collected and restricted by the Enclosed Body of Machine. No human exposure is involved in Cutting operation.
• Exposure of acid fumes and lead meet best environmental practices in the world
• No. Adjustment of Width is required.

 

Operation of Machine : Batteries are placed on the moving conveyor. Top of Batteries is sliced off by high Speed Bend Saw. There is one Bend Saw with height adjustment to set Cutting (Slicing) Height. Height is set manually. Sliced off Lid from first window is ejected out.  Then battery moves to second cutting Blade, here Connection Strap and Part of Container is Sliced off which is also ejected out from Second Window. If more height battery is sliced off then part of Plates and Container is also sliced off and Remaining Part of battery is transported by the conveyor to other end of the machine, where it is toppled into Acid Draining Attachment.

 

Output of Machine :

• Battery Top
• Connection Strap with Container Part
• Part of Plates and Container
• Remaining part of Battery.
• Acid Drained out in to Acid tank.

This machine has a automatic conveyor. Battery is placed on the conveyor. Width of Battery, need not to be set. It can accommodate Battery up to Max. Width of 305mm. Most of Batteries are below this. Cutting height can be set by turning Rotary wheel. This wheel is visible in picture of machine. Scale is provided to set the height of cutting from bottom. Conveyor takes the Battery in machine for cutting. During Cutting of Battery dust is confined inside of covers because cutter is enclosed. Normally Cutting is set at sealing line of lid. Max. of Automotive Batteries have approximately same height, say +-10 mm. Remaining Battery will come out of machine on Conveyor.