Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

FC

Flowway Corporation
location Vatva, Ahmedabad, Gujarat

Write a Review
Call Now Call Now

Our Products

  1. Industrial Seals 14 Products available
  2. Others Products 1 Products available

Industrial Seals

Our offered Product range includes Tungsten Carbide Seal, Cartridge Seal, Conical Spring Seal, Rubber Bellow Seals and Multiple Spring Seals.

Tungsten Carbide Seal

Tungsten Carbide Seal
Seal face: Silicon carbide, Carbon, Tungsten carbide, Secondary seals: FKM, EPDM, FFKM, PTFE, Shaft diameter: d1 = 25 . 100 mm(Other sizes on request), Temperature: t = -20 C . 200 C(Check O-Ring resistance), Sliding face material combination SicSic or TcSic .
View Complete Details
Ask Latest Price & Details
Cartridge Seal

Cartridge Seal
Seal face: Silicon carbide, Carbon, Tungsten carbide, Seat: Silicon carbide, Secondary seals: FKM, EPDM, FFKM, PTFE, Single seal, Balanced Cartridge seal, Independent of direction of rotation, Single seals without connections, with flush and with quench combined with lip seal or throttle ring
View Complete Details
Ask Latest Price & Details
Conical Spring Seal

Conical Spring Seal
  • Universal application opportunities No damage of the shaft by set screws
Seal face: Special cast steel, Silicon carbide , Ceramic, Seat: Carbon, Silicon carbide*, Ceramic, Special steel.Secondary seals: EPDM, NBR, FKM, FFKM, PTFE.For plain shafts, Unbalanced
View Complete Details
Ask Latest Price & Details
Rubber Bellow Seals

Rubber Bellow Seals
  • Shaft Diameter d1 = 10 … 100 mm
  • Pressure p1 = 14 bar
  • Seal face Carbon, Silicon carbide, Tungsten carbide
  • Seat Silicon carbide, Tungsten carbide, Special cast steel, Ceramic
  • Elastomer NBR, EPDM, FKM, HNBR
  • Temperature t = -20 °C … +140 °C
  • Sliding velocity vg = 12 m/s
Features
  • For plain shafts
  • Available in single seal and dual seal
  • Elastomer bellows rotating
  • Unbalanced
  • Independent of direction of rotation
  • No torsion on bellows
Advantages
  • Shaft protection over entire seal length
  • Protection of seal face during installation due to special bellows design
  • Insensitive to shaft deflections due to large axial movement ability
  • Universal application opportunities
  • High flexibility due to wide offer on materials
  • Dimension adaptions and additional seats available
  • Suitable for low-end sterile applications
Recommended applications
  • Process industry
  • Chemical industry
  • Pulp and paper industry
  • Water and waste water technology
  • Food and beverage industry
  • Sugar industry
  • Slurries (up to 5 % by weight)
  • Pulp (up to 4 % otro) Latex
  • Dairies, beverages
  • Sulfide slurries
  • Oil applications
  • Chemical standard pumps
  • Circulating pumps
  • Submersible pumps
  • Pressure: p1 = 14 bar
  • Temperature: t = -20 C +140 C
  • Sliding velocity: vg = 12 m/s

Material Temperature Recommendations
EPDM -40°C to +140°C General applications, especially hot water. Must not come into contact with Oils.
NBR -30°C to +120°C Standard Material. Suitable for medium duty applications. Not recommended for hot water.
FKM -30°C to +230°C Suitable for general chemical applications. Not recommended for hot water.
View Complete Details
Ask Latest Price & Details
Multiple Spring Seals

Multiple Spring Seals
  • Secondary Seal VITON, PTFE, GFT, TTV, EPDM, NBR (O-ring will be used for clean media application and wedges be used for corrosive media application )
  • Seal face Carbon, Silicon carbide, Tungsten carbide
  •   Seat
  • Silicon carbide,Tungsten carbide, Ceramic  
  •   Shaft diameter
  • d1 = 100 mm Pressure
  • p1 = 12 bar Temperature
  • t = -20 °C to 200 °C Sliding velocity
Features
  • Unbalanced
  • Available in single seal and dual seal
  • For plain shaft
  • Rotating multiple spring
  • Independent of direction of rotation
Advantages
  • Flexibility in torque transmission
  • Optimized, narrow width seal face design
  • Compact axial and radial dimensions
Recommended applications
  • Process industry
  • Chemical industry
  • Acids
  • Alkaline solution
  • Salt solution
  • Hydrocarbon
  • Process pump
  • Water and sea water
  • Low viscosity oil
View Complete Details
Ask Latest Price & Details
Conical Spring Seals

Conical Spring Seals
  • Seal face Special cast steel, Silicon carbide , Ceramic
  • Seat Carbon, Silicon carbide*, Ceramic, Special steel.
  • Secondary seals EPDM, NBR, FKM, FFKM, PTFE.
Features
  • For plain shafts
  • Single seal
  • Unbalanced
  • Rotating conical spring
  • Dependent on direction of rotation
Operating Range
  • Shaft diameter: d1 = upto 80 mm
  • Pressure: p1 = 12 bar
  • Temperature: t = -20 C to +140 C
  • Sliding velocity: vg = 15 m/s
Advantages
  • Universal application opportunities
  • Insensitive to low solids contents
  • No damage of the shaft by set screws
  • Large choice of materials
  • Short installation lengths possible (G16)
  • Variants with shrink-fitted seal face available
Recommended applications
  • Chemical industry
  • Pulp and paper industry
  • Water and waste water technology
  • Building services industry
  • Food and beverage industry
  • Sugar industry
  • Low solids content media Water
  • and sewage water pumps
  • Submersible pumps
  • Chemical standard pumps
  • Eccentric screw pumps
  • Cooling water pumps Basic Sterile applications
View Complete Details
Ask Latest Price & Details
Dry Running Seals

Dry Running Seals
  • Seal face FDA conform carbon
  • Seat Silicon carbide
  • Secondary seals According to application and customer's specifications.
Features
  • For top entry drives, on request side drive possible
  • Dry-running
  • Available in single seal and dual seals
  • Balanced
  • Outboard
  • Multiple springs rotating
  • Independent of direction of rotation
Operating Range
  • Shaft diameter: d1 = 25 . 160 mm
  • Pressure: p1 = vacuum . 6 bar
  • Temperature: t = -30 C . +140 (250) C
  • Sliding velocity: vg = 2 m/s
Advantages
  • Available as components or as cartridge units
  • Suitable for pressure reversals
  • Due to the hydraulic conditions, product pressure as well overlaying barrier pressure closes the seal
  • Friction-locked connection to the shaft
Recommended applications
  • Chemical industry
  • Pharmaceutical industry
  • Food and beverage industry
  • Non-toxic media with single seal
  • Toxic media with double seal
  • Agitators
  • Reactors
View Complete Details
Ask Latest Price & Details
Split Seals

Split Seals
  • Seal face Carbon , Silicon carbide
  • Seat Silicon carbide
  • Secondary Seals FKM, EPDM, NBR
Features
  • Fully split single seal, 2 x 2 segments, pre-assembled
  • Semi-cartridge
  • Balanced
  • Stationary springs
  • Bi-directional
  • External pressurization
  • Built-in flushing connections Installation and wear control
Operating Range
  • Shaft diameter:d1 = 50 150 mm
  • Pressure: p1 = 12 bar
  • Temperature:t = -20 . +130 C , (above 80 C flush is recommended)
  • Sliding velocity: vg = 10 m/s
Advantages
  • Reduced repair and downtime: 2 x 2 pre-assembled design speeds up and simplifies installation installation because pump does not have to be disassembled.
  • Long service life: precise pre-alignment because of pre-assembled segments.
  • Stationary springs which are protected from the product prevent clogging.
  • Greater flexibility during installation: no modification necessary because the seal is located outside of the stuffing box.
  • Shaft protection: uniform torque transmission via clamping ring prevents damage caused by set screws.
Recommended applications
  • Process industry
  • Chemical industry and Petrochemical industry
  • Power plant technology
  • Pulp and paper industry
  • Centrifugal pumps and Displacement pumps
  • Agitators
  • Conveying pulp with stock pumps
  • Conveying timber to refiners with pumping screws
  • Circulation of pulp-and-water mixtures in storage vessels
  • Pump stations for waste water treatment
  • Cooling water pumps for energy generation
View Complete Details
Ask Latest Price & Details
Cartridge Seals

Cartridge Seals
  • Seal face Silicon carbide, Carbon, Tungsten carbide
  • Seat Silicon carbide
  • Secondary seals FKM, EPDM, FFKM, PTFE
Features
  • Single seal
  • Balanced Cartridge seal
  • Independent of direction of rotation
  • Single seals without connections, with flush and with quench combined with lip seal or throttle ring
Operating Range
  • Shaft diameter: d1 = 25 . 100 mm(Other sizes on request)
  • Temperature: t = -20 C . 200 C(Check O-Ring resistance)
  • Sliding face material combination Car/SicPressure: p1 = 25 bar
  • Sliding velocity: vg = 14 m/s
  • Sliding face material combination Sic/Sic or Tc/SicPressure: p1 = 12 barSliding velocity: vg = 10 m/s
Advantages
  • Ideal seal for standardization
  • Universal applicable for packing conversions, retrofits or original equipment
  • No dimensional modification of the seal chamber (centrifugal pumps) necessary, small radial installation height
  • No damage of the shaft by dynamically
    • loaded O-Ring
  • Extended service life
  • Easy installation due to pre-assembled unit
  • Individual adaptation to pump design possible
  • Customer specific versions available
Recommended applications
  • Refining technology
  • Petrochemical industry
  • Chemical industry
  • Pharmaceutical industry
  • Food and beverage industry
  • Non-toxic media with single seal
  • Toxic media with double seal
  • Agitators
  • Reactors
View Complete Details
Ask Latest Price & Details
Metal Bellow Seals

Metal Bellow Seals
  • Seal face Carbon , Silicon carbide
  • Seat Silicon carbide
  • Bellows Inconel® 718 hardened, Hastelloy® C-276
  • Metal parts CrNiMo steel, Duplex, Carpenter® 42, Hastelloy® C-4
Features
  • For unstepped shafts
  • Single Seal
  • Balanced
  • Independent of direction of rotation
  • Metal bellows rotating
Operating Range
  • Shaft diameter:d1 = 16 150 mm
  • Externally pressurized:: p1 = 12 bar
  • Internally pressurized:
  • p1
View Complete Details
Ask Latest Price & Details
High Pressure Cartridge Seals

High Pressure Cartridge Seals
  • Seal face Carbon
  • Seat Silicon carbide
  • Secondary seals EPDM, NBR, FKM, FFKM
Features
  • Available in single seal and dual seal
  • Cartridge unit
  • Independent of direction of rotation
  • Rotating multiple springs
Operating Range
  • Shaft diameter:d1 = 20 110 mm
  • Pressure: p1 = 35 bar
  • Temperature:t = -20 C . +200 C
  • Sliding velocity: vg = 20 m/sOther Sizes on request
Advantages
  • "Low-Emission-Seal" acc. to the American STLE-limits
  • Universally applicable both for retrofits or original equipment
  • Efficient stock-keeping due to standardized components
  • Extended selection of materials
  • Extended field of operation in terms of temperature and pressure
  • Metal parts also in special materials available
Recommended applications
  • Process industry
  • Oil and gas industry
  • Refining technology
  • Petrochemical industry
  • Power plant technology
  • Light hydrocarbons
  • Hot water
  • Process pumps
View Complete Details
Ask Latest Price & Details
Wave Spring Seals

Wave Spring Seals
  • Seal face Special cast steel, Silicon carbide , Ceramic
  • SeatG9 Carbon, Silicon carbide
  • Seat G4 & G6 Silicon carbide
  • Seat G13 Carbon
  • Secondary seals EPDM, NBR, FKM, FFKM
Features
  • For plain shafts
  • Single seal
  • Unbalanced
  • Wave spring or multiple springs rotating
  • Independent of direction of rotation Variant
  • With PTFE secondary seals for high chemical resistance
Operating Range
  • Shaft diameter: d1 = 14 . 100 mm
  • Pressure: p1 = 20 bar
  • Temperature: t = -40 C to +200 C
  • Sliding velocity: vg = 20 m/s
Advantages
  • Universal application opportunities
  • Efficient stock keeping due to easily interchangeable faces
  • Extended selection of materials
  • Insensitive to low solids contents
  • Flexibility in torque transmissions
  • Self cleaning effect
  • Pumping screw for media with higher viscosity
  • Short Installation Length Possible (G16)
Recommended applications
  • Process industry
  • Chemical industry
  • Pulp and paper industry
  • Water and waste water technology
  • Lube oils
  • Low solids content media
  • Water / sewage water pumps
  • Chemical standard pumps
  • Vertical screw pumps
  • Gear wheel feed pumps
  • Multistage pumps (drive side)
  • Circulation of printing colors with 2 viscosity500 . 15, 000 mm /s.
View Complete Details
Ask Latest Price & Details
Silicon Carbide Seals

Silicon Carbide Seals
Shaft diameter: d1 = 25 . 100 mm(Check O-Ring resistance)Sliding face material combination CarSic , Sliding face material combination SicSic or TcSic , Sliding velocity: vg = 10 ms
View Complete Details
Ask Latest Price & Details

Agitator Seals

Materials
  • According to application and customer's specification.
Features
  • For top entry drives
  • Available in single seal and dual seals
  • Unbalanced
  • Independent of direction of rotation
  • Multiple springs rotating
  • Outboard
  • Liquid-lubricated
  • Cartridge unit
Operating Range
  • Shaft diameter: d3 = 40 . 220 mm
  • Single Seals:Pressure:p1 = Vacuum . 6 bar , p3 = Pressure lessTemperature: t1* = -30 C . +150 (250) C
  • Double Seals:Pressure: p1 = Vacuum . 16 bar, p3 = max. 18 barTemperature: t1* = -30 C . +200 (350) C
  • Sliding velocity: vg = 0.5 m/sFor applications beyond this range, please inquire. * Higher or lower temperatures on request
Advantages
  • Ready-to-fit and factory-tested units
  • Available with or without floating bearing
  • Suitable for standardizations
  • Double seals can be applied at higher
  • pressure and rotating speed.
  • Due to the hydraulic conditions, product
  • pressure as well overlaying barrier
  • pressure closes the seal
Recommended applications
  • Refining technology
  • Petrochemical industry
  • Chemical industry
  • Pharmaceutical industry
  • Food and beverage industry
  • Non-toxic media with single seal
  • Toxic media with double seal
  • Agitators
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.