Flow tech Instruments Services

Makarpura, Vadodara, Gujarat

We are offering orifice plates and flange assemblies. Description : flowtech make orifice plates & flange assemblies. suitable for creating differential pressure in a pipe line for flow transmitter etc. orifice flange assemblies consist of weld neck type flanges with studs, nuts, and gaskets. Available in ss-316/p.p.material. Design standard confirm to bs 1042 fowtech make orifice flange assemblies are used for measuring flow of various liquids, gases & steam from1 to 24 line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of differential pressure created when an obstruction is placed in the fluid flow, due to increase in fluid velocity. design standards design - confirming to isa rp 3.2, dn 1952, bs 1042, iso-5167orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age 3accuracy - within +/- 1 %vent / drain - vent or drain holes are provided as per customers requirement. Not drilled for orifice bore smaller than 25.4 mm.

We are offering orifice plate flange. Description : flowtech make orifice plates & flange assemblies. suitable for creating differential pressure in a pipe line for flow transmitter etc. orifice flange assemblies consist of weld neck type flanges with studs, nuts, and gaskets. Available in ss-316/p.p.material. Design standard confirm to bs 1042 fowtech make orifice flange assemblies are used for measuring flow of various liquids, gases & steam from1 to 24 line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of differential pressure created when an obstruction is placed in the fluid flow, due to increase in fluid velocity. design standards design - confirming to isa rp 3.2, dn 1952, bs 1042, iso-5167orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age 3accuracy - within +/- 1 %vent / drain - vent or drain holes are provided as per customers requirement. Not drilled for orifice bore smaller than 25.4 mm.

We are offering reflex transparent level gauge. description of reflex type level gauge :- flowtech instrument offers reflex level gauge for the measurement of liquid level at a glance in tank. This is particularly using for high pressure or high temperature or toxic liquid storage tanks. these gauges have a prism glass window that uses the basic optical principles of light refraction & reflection to enhance the indication of the liquid level. In brief when the light strikes the area of glass covered by the liquid is allow passing to the interior of the gauge. So that the area appears dark (black). While the light strikes the open space, above the liquid level is reflected back to the observer so that the area appears silver-white. We can clearly see the actual liquid level in the systems. description of transparent type level gauge :- in this type of level gauge the liquid level is discriminated in the form of different specifications : type : reflex / transparentvisibility : full visibility / partial visibilityliquid chamber : carbon steel , s.s.304, s.s.304 (l) , s.s.316 , s.s.316 (l), p.pcover plate : carbon steel , s.s.304, s.s.304 (l) , s.s.316 , s.s.316 (l), p.pgasket : caf , ptfe , graphoil , other on request glass : borosilicate toughened of indigenous temperature range upto 125oc , klinger / maxos maketemperature range upto 400oc , other on request designed for high pressure & temperature liquid storage tanks in petrochemicals, fertilizers, pharmaceuticals & chemical industries. in reflex level gauges, the glass has precision groves cut inner side and mainly used for colorless liquids. in transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids. max. 3000 mm length in single piece. imported/indigenous glasses on request. frost free arrangement on request.

Description tank mounted view glass size : 50 to 600 nbround square & rectangular shapemoc : cs, ss 304 , ss 316.

Size : 50 to 600 NBRound Square & Rectangular ShapeMOC : CS, SS 304 , SS 316.

We are offering double window sight glass. We are manufactures industrial sight flow indicator (sight glasses) in two types. ( 1 ) full view type &( 2 ) double window type. in double window sight glass contains two toughened glasses mountedopposite to each other. This enables observation of the flow. Due to toughenedglasses sight glass can withstand high pressure (maxi. 25 kg / cm2) hightemp (maxi. 2000 ) & full vacuum service. We are manufacturing this sightglasses in flanged or screwed or socket weld or butt weld end connection inm.s, c.s. (a105), s.s.304, s.s.316, or ms with rubber or pp or pvdf orteflon lined or any other alloy. We are giving from 15 nb to 300 mm nb. we are also manufacturing double window with jacket for special application.

We are offering moisture absorber assembly. suitable for viewing the level of two different density liquids at the bottom of the tank during removal of liquid. suitable for temperature up to 100 degree cpressure up to 3 kg/cm2available in ss 316 / ss 304 / pp/ ptfe lined construction

We are offering full view sight glasses description: flowtech manufactures industrial sight flow indicator (sight glasses) in two types. ( 1 ) full view type &( 2 ) double window type. ( 1 ) full view sight indicators full view sight indicators are an in-line type that is used to provide 360 degree viewing of material flow through a line. they are unique because the characteristics of the liquid can be viewed. a typical sight flow allows observation of liquids through a glass pane while the full-view sight flow allows observation of liquids in transit through a more dynamic, three dimensional pipeline. size: 15 to 300 nb. Moc: cs, ss-304, ss-316, p.p. ( 2 ) double window type. in double window sight glass contains two toughened glasses mountedopposite to each other. This enables observation of the flow. Due to toughenedglasses sight glass can withstand high pressure ( maxi. 25 kg / cm2 ) hightemp ( maxi. 2000 ) & full vacuum service. We are manufacturing this sightglasses in flanged or screwed or socket weld or butt weld end connection inm.s, c.s.( a105 ), s.s.304, s.s.316, or ms with rubber or pp or pvdf orteflon lined or any other alloy. We are giving from 15 nb to 300 mm nb. we are also manufacturing double window with jacket for special application. generally our double window sight having drip tube type design but for anytransparent liquid we can also provides rotating blade type & for any gasapplication we can also provides flapper type double window sight glasses. size 25 nb to 600 nb. drip tube / rotating blade / flapper for special applications. moc : cs, ss-304, ss-316, ms with rubber or ptfe lining. connections : screwed / flanged / socket weld / tc jointjacketed for special applications.