Tubular Level gauge for visual liquid level observation is very common in process industry. It is a simple and reliable device for direct reading in atmospheric or pressurized tank applications. It is mounted parallel, along the side of tank. As the process level fluctuates, the level in the transparent glass tube changes accordingly and gives local liquid indication. Technical Specification : New Bolted Gland with teflon packing ensures positive leaktighnes for full vacuum as well as 10kg/cm2 pressure service. Sturdy Protection : Glass tube is protected by box section made out of two M.S.channels Beam strength of the guard is so good that even if man stands on the indicator supported at two ends, the tube remains intact. Light Weight : 75% less in weight compared to Reflex and Transparent liquid level indicators. Extraordinary strength but less bulky. Excellent Visibility : 16/19/25mm O.D Borosilicate glass gives excellent visibility. Surface tension effects are eliminated. Test Pressure : Full vacuum and/or 10 kg/cm compressed Air

Here in this case this indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rises the float, which buoys up, moves the connecting pipe to the region of visibility on top. Construction : The Top Mounted Magnetic Level Indicator basically consists of a guide pipe, float with stem main magnet, a guard protecting magnet guide tube, follower magnet and glass tube, The guide pipe inserted in the tank, guide the float which follows the liquid level in the tank. The main magnet mounted on the the stem tip in turn follows the liquid level. Magnetic coupling between main magnet and follower magnet brings the visual indication of level outside. Follower magnet moves in an isolated glass tube filled with density compensating liquid. The entire construction is very sturdy keeping in view its outdoor installation. Applications : Dipstick substitute Underground tanks Horizontal tank Corrosive acids such as H2S04, RNO3 chlorosulphonic acid, oleum, acetic, CS2 Solvent tanks such as benzene, Acetone, toluene, alcoholic liquids or any organic liquid, butadiene, vinyl acetate, vinyl chloride. Liquefied Gases such as liquid chlorine, liquid ammonia, LPG Molten Sulphur Phosphorus, Lead etc.

Simple Magnetic Principle used to get unique, Absolutely safe and most reliable level Indication for dangerous Liquids even under high pressures.
Here in this case this indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rises the float, which buoys up, moves the connecting pipe to the region of visibility on top. Application :

Corrosive acids - oleum, H2SO4 HNO3, Acetic. Solvents - bezene, toluene, alcohols, CS2. Liq. Gases - LPG, NH3, Chlorine. Propylene, Butadiene. Veg.Oils, Fuel Oils, Lubricants, Water Poisonous / toxic liquids, DMA, TEA, PCL3.SO3 Rotoball Option Accessories :High & Low level Alarm. Resistance Strip with 4-20 m Amp. output.

Tubular Level gauge for visual liquid level observation is very common in process industry. It is a simple and reliable device for direct reading in atmospheric or pressurized tank applications. It is mounted parallel, along the side of tank. As the process level fluctuates, the level in the transparent glass tube changes accordingly and gives local liquid indication. Technical Specification : New Bolted Gland with teflon packing ensures positive leaktighnes for full vacuum as well as 10kg/cm2 pressure service. Sturdy Protection : Glass tube is protected by box section made out of two M.S.channels Beam strength of the guard is so good that even if man stands on the indicator supported at two ends, the tube remains intact. Light Weight : 75% less in weight compared to Reflex and Transparent liquid level indicators. Extraordinary strength but less bulky. Excellent Visibility : 16/19/25mm O.D Borosilicate glass gives excellent visibility. Surface tension effects are eliminated. Test Pressure : Full vacuum and/or 10 kg/cm compressed Air

Here in this case this indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rises the float, which buoys up, moves the connecting pipe to the region of visibility on top. Construction : The Top Mounted Magnetic Level Indicator basically consists of a guide pipe, float with stem main magnet, a guard protecting magnet guide tube, follower magnet and glass tube, The guide pipe inserted in the tank, guide the float which follows the liquid level in the tank. The main magnet mounted on the the stem tip in turn follows the liquid level. Magnetic coupling between main magnet and follower magnet brings the visual indication of level outside. Follower magnet moves in an isolated glass tube filled with density compensating liquid. The entire construction is very sturdy keeping in view its outdoor installation. Applications : Dipstick substitute Underground tanks Horizontal tank Corrosive acids such as H2S04, RNO3 chlorosulphonic acid, oleum, acetic, CS2 Solvent tanks such as benzene, Acetone, toluene, alcoholic liquids or any organic liquid, butadiene, vinyl acetate, vinyl chloride. Liquefied Gases such as liquid chlorine, liquid ammonia, LPG Molten Sulphur Phosphorus, Lead etc.

Simple Magnetic Principle used to get unique, Absolutely safe and most reliable level Indication for dangerous Liquids even under high pressures.
Here in this case this indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rises the float, which buoys up, moves the connecting pipe to the region of visibility on top. Application :

Corrosive acids - oleum, H2SO4 HNO3, Acetic. Solvents - bezene, toluene, alcohols, CS2. Liq. Gases - LPG, NH3, Chlorine. Propylene, Butadiene. Veg.Oils, Fuel Oils, Lubricants, Water Poisonous / toxic liquids, DMA, TEA, PCL3.SO3 Rotoball Option Accessories :High & Low level Alarm. Resistance Strip with 4-20 m Amp. output.