Our Products
The Pennant trap module is a complete system which includes isolation valves, by-pass valves, and trapping device, interconnected with pipes, flanges, reducers, elbows, etc. In response to specific requests, strainers, sight check, check valve, etc. could be supplied duly fitted into the system.
Pennant offers pressure reducing station with PRV or flow control valve with pressure control loop which ensures the required accurate pressure control to fulfill process requirements. Single-stage pressure reduction results in a compact system. The system supplied is complete and ready to fit on site.
Size | Materials | Pressure Range |
DN15 * DN15 to DN300 * DN300 | Carbon Steel, Stainless Steel | #150, #300 |
Pipe Union with SS Spiral wound gasket.
PMO (bar) TMA (ºC) | Size |
148 / 370 | DN15~80 |
Pennant condensate pump (PCP10) is an excellent alternative to standard electric pumps which are not suitable for pumping hot condensate. It is a complete non-electric solution designed to lift condensate to the boiler feed-water tank using small quantity of motive steam.
Sizes | For Stand Alone (End connections) | For Pump & Recover Skid (End connections) |
DN25*DN25 to DN100*DN100 |
Flanged #150, #300 & Screwed (NPT / BSP / BSPT) |
Flanged #15 |
Pennant's hot water systems are customized to cater to the hot water requirements of small and medium-sized establishments, using low-pressure steam as the energy source. Compact and easy to install, these plug-and-play systems are energy efficient and safe. This system is designed and constructed for specific parameters.
Pennant Manifolds facilitate effective condensate collection/ steam distribution, with flexible configuration, and neat, easy-to-maintain construction. Properly-sized and located condensate collection manifolds and steam distribution manifolds can lead to more efficient collection and return of condensate in a plant, and increase the competence and consistency of steam trap maintenance and repair programs.
Materials | Rating | Manifold Size | Tracer Line |
Pressure Parts – Forged Carbon Steel Internals – Stainless Steel | #300, PN63 | DN40- Socket Weld to ASME B16.11 | DN15 to DN25 – Screwed/ Socket Weld to ASME B16.11 |
Pennant Y-strainers for industrial applications are available with S.S. perforated screens. Pennant Y-strainers are an ideal choice to filter and subsequently remove out pipeline debris such as scale, rust and other impurities in the media.
The Pennant moisture separator (PMS) is a baffle type separator used for the removal of moisture content in steam which can be drained out as condensate.
Size | Materials |
DN25 to DN250 | Carbon Steel/ Stainless Steel/ Cast Iron/ Ductile Iron |
Compressed Air Drain Trap (Aerodyne) with inbuilt strainer, SS construction.
End conns.:Screwed NPT / BSPT / BSP / SW
PMO (bar) TMA (ºC) | Capacity at PMO (kg/hr) | Size |
42 / 426 | 862 | DN15,20 |
Universal Connector. SS construction, A351 Gr. CF8.
End conns.:Screwed NPT / BSPT / BSP / SW (Suitable for mounting PT18 traps)