Flips India Engineering

Andheri East, Mumbai, Maharashtra

FIE 1121 Corrugated (Crinkled) Flexible Graphite Tape is made from plain flexible graphite tape pressed under corrugated mould. The tapes designed for use as packing, widely used for pump and valves. It is easily installed for small diameter valves.
Corrugated flexible graphite tape with adhesive backed is used for flange sealing as gasket, especially for large diameter flanges.

Our Style:
FIE-1121aCorrugated Flexible Graphite Tape
FIE-1121bCorrugated Flexible Graphite Tape with adhesive backed

Carbon fiber contains high strength-to-weight and stiffness-to-weight ratios. They are thermally and electrically conductive and exhibit excellent fatigue resistance. When properly engineered, carbon fibre cloth can achieve the strength and stiffness of metals at significant weight savings. Carbon fibre cloths are compatible with various resin systems including epoxy, polyester and vinyl ester resins. Carbon fibres are inherently high in tensile and flexural strength as well as tensile and flexural modulus. They are conductive, inert to most chemicals, light weight, and as such are widely used in the following applications:

Sporting equipment - Aircraft parts and structures - Artificial limbs Bridges - Conductive Floors and Walls - CNG fuel tank structures - Decorative parts - Golf shafts - Instrument cases - speed boat and Yacht building - Process Rollers Rackets - Race car construction - Structural Strengthening and ship components.

• Extremely light weight
• High strength
• High stiffness
• Great Appearance

This high temperature, heat and flame resistant thermal insulating ceramic fiber tape will withstand temperatures of 2300F / 1260C continuous exposure.

This material resists most acids and alkalis and is unaffected by most bleaches and solvents. It is highly flexible and conformable.

This tape is available with fiberglass or wire reinforcement to give the tape dimensional stability.

Applications for this product include thermal insulation and/or protection of wires, cables, hoses, pipe and tube, as well as affording energy savings and personnel protection.

The tape is available in Plain and Drop Warp Styles. Drop Warp tape has several of the center lengthwise yarns missing during weaving, and allows the tape to be easily used for bolt-hole applications (sometimes called ladder tape).

Tape Standard Width: 1, 2, 3, 4; Standard Length: 100 (30 m)

Flips joint tape is woven from fibreglass bulk yarn coated with acrylic acid copolymer liquid and is therefore water, alkali and age resistant. The tape has high tensile strength, good dimensional stability, good elasticity, capillary action and corrosion resistance.

This tape is very strong and having a self adhesive layer on one side is easily used in various construction applications. These include reinforcing wall cracks, board cracks, plasterboard cracks and marble cement; in addition to repairing drywall joints

Flips fibreglass tapes are woven using a special type of glass yarn which is resistant to oils, solvents and most chemicals and has tensile strength. Flips tapes become quickly saturated with resin, leaving a pliable matting easily moulded into the required shape.

Flips fibreglass tape can be applied as reinforcements for GRP mouldings, high strength requirements, small GRP components, pultrusion tapes with feathered edge for tube manufacture e.g. boat building, prevention and repair of reflective cracking on highways, wind turbine blade construction and pattern making.

Our standard fibreglass tape is available from 25mm to 150mm in width and in 50m length rolls.

• Quickly saturates with resin
• Easily moulds to shape
• Widths to 150mm
• Wide range of weights/m squared available
• Excellent Repair Tape

Flips Sealon is a packing cord, a versatile gasket made of pure PTFE, and free from any additives.It is economical: cut off only the desired length from the spool. It usually costs, on a per-gasket basis, less than other gasketing alternative. There is no scrap or waste. Since there is no fitting or precutting, it has just to be pressed in place, saving on installation time, too. Since it is inert to most chemicals, it is perfect for the most challenging chemical applications.

Easy InstallationFirst, clean surfaces of flanges. Form a ring by pressing Sealon around center of flange. The two ends should overlap 1 2 cm near a bolt hole. Reposition the other half of the flange and tighten up the bolts on diagonal line using equal pressure. During routine maintenance, flanges will part freely and Sealon will be easy to remove.

Flips Sealon with Adhesive TapeFlips Sealon can be delivered with self-adhesive film on one side, covered with a paper film as backing. This makes sealing work easy: simply remove the paper backing from the self-adhesive film and the self-adhesive tape will hold the Sealon in place until permanently put in position by the pressure of e.g. bolts.

PropertiesFlips Sealon has excellent resistance of pressing, creep relaxation and cold flow. It can even seal damaged and uneven surfaces. It does not have any corrosion and is able to be stored without any time limits. When properly installed, Sealon becomes a thin, strong gasket with the ability to withstand high compressive loads. This, together with its resistance to creep and cold flow, helps Sealon maintain a high level of tightness over time. In most applications, after initial installation, there is no need to retorque, even at temperatures up to 600 F (315 C).

ApplicationsFlips Sealon is used in industries including: Chemical Manufacturing, Food Equipment Manufacturing, Pharmaceutical Plants, Petrochemical Production, Steel Manufacturing, Distilling, Food and Beverage Processing, Pulp and Paper Processing, Power Generation, Marine Applications. Sealon is used in virtually many types of sealing applications like: Pipe Flange Gaskets, Pipe Sealants, Fume Ducts, Concrete Lids, Tanks, Heat Exchangers, Pressure Containers, Cooling Towers, Reactors, Casings, Fiberglass-Reinforced Plastic Vessels, Various Lining Containers, Hydraulic and Pneumatic Systems, Sealing Gaskets for Large-Diameter Equipment. Since Sealon has a low stress to seal requirement, it also makes an effective gasket on delicate assemblies such as Glass, Plastic, FRP, Ceramic or Graphite.

FIE 1120 Plain Flexible Graphite Tape is cut from our flexible graphite rolls by exact lather which offers excellent sealing capabilities under extreme conditions. Our graphite tape has excellent tensile strength, compressibility and recovery; it is the best filler material for making spiral wound gaskets.

ApplicationFiller for spiral wound gaskets.In-situ pump and valve gland packing.Manufacture of graphite die-formed rings.Facing material for comprofile type gaskets.Filler for metal jacketed type gaskets.