Coating Thickness Pocket Gauge EvaluationStatistics:Display of mean value, MIN, MAX, standard deviation, and number of measurements per blockPC softwarePC software FISCHER DataCenter with the following functionality:included in the archiving and Transferring measurement data, comprehensivescope of supply:statistical and graphical assessment, simple creation as well as printing of inspection reports.Measurement FunctionsBlock size:Adjustable between 2 & 20 single readings per blockTolerance limits:Adjustable as per the selected measuring mode

Hand-held instrument for measuring coating thickness on PC Boards and electroplated surfaces. The hand-held PHASCOPE® PMP10 is ideally suited for quality control in the electroplating and printed circuit board (PCB) industries. Because the instrument employs the phase-sensitive eddy current method (ISO 21 968), it allows the measurement of metal coatings on any substrate. A specially designed probe even enables measurements in PCB throughholes.

Applications

• Measuring copper thickness in PCB through-holes, especially on thick PC Boards.
• Measuring coating thickness of nickel on steel
• Measuring zinc or copper on steel â despite rough surfaces and complex surface geometries
• Measuring the thickness of non-ferrous metals on non-ferrous metals, given sufficient difference in conductivity, e.g. copper on brass or bronze
• Measuring the thickness of non-ferrous metals on insulating substrates, such as copper layers on circuit boards.
• Sheet metal processing
• Paint/zinc on iron, e.g. thin EPD coatings
• Paint on aluminium
• Paint on steel
• Brake line tubing
• Wire (mesh and lattice), e.g. shopping trolleys

Instrument features

• DUPLEX measuring mode: display of paint on zinc on iron or paint on aluminium
• DUAL measuring mode: display of total thickness (paint and zinc) on iron or paint on aluminium
• Extensive evaluation and statistics functions
• Outlier control and tolerance monitoring options
• Various languages to choose from
• Battery and/or continuous operation via plug-in charger (included)
• Storage of up to 20, 000 readings
• Data transfer via RS232 interface

Lead Frame Coating Thickness Measurement gauge for electroplating as well as electroless coatings X-Ray or XDV-µ Fluorescence Tester is accessible in diverse technical specifications. The range of o Lead Frame Coating is used for non-destructive analyses as well as measurements of coating thickness on very tiny components and structures with complex coating systems.

Applications

• Measurements on very tiny flat components as well as structures like contacts, printed circuit boards, or lead frames
• Study of very thin coatings like gold/palladium coatings of 0.1m (0.004 mils)
• Measurement of functional coatings in the semiconductor and electronics industries
• Determination of complex multi-coating systems
• Automated measurements like quality control

General Specification

• Intended use:Energy dispersive x-ray fluorescence measuring instrument (EDXRF) to measure thin coatings and coating systems on very small flat structures.
• Element range:Aluminum Al (13) to Uranium U (92) - up to 24 elements simultaneously.
• Design:Bench-top unit with hood opening upwards and housing with a slot on the side.
• X/Y- and Z-axis electrically driven and programmable
• Motor-driven changeable filters
• Measuring direction:Top down

Design

• These are uniquely designed and developed with high-precision, programmable XY-stage and an electrically.
• These are user-friendly bench-top instruments acclaimed for sample stage moves into the loading position automatically, when the protective hood is opened.
• These are compact sized, robust designed and ensure longer stability. Its laser pointer works as a positioning aid and supports the quick alignment of the sample to be measured.
• These are operated through the powerful and user-friendly WinFTM® software and designed as per German regulations Deutsche Rntgenverordnung-rov". Its entire operation and evaluation of measurements as well as the clear presentation of measurement data is performed on a PC through software.

Typical areas of application are

• Analysis of very thin coatings of ¤ 0.1 ¼m (0.004 mils)
• Measurements of functional coatings in the electronics and semiconductor industries
• Determination of complex multi-coating systems
• Automated measurements, e.g., in quality control
• Determination of the lead content in solder

Thin Coating Thickness Measurement Instrument for electroplating and electroless coatings is designed under the direction of knowledgeable quality controllers. The range of Thin Coating Thickness is designed for automated or manual coating thickness measurements and examination on PC-boards. They are energy dispersive X-ray fluorescence measuring instruments for the measurement and investigation of thin coatings, even at small concentrations.

Models

• XDLM 232: Manually operable XY-stage, motor-driven Z-axis
• XDLM 237: Motor-driven XY-stage that moves into the loading position
• XDLM 231: Plane support stage, motor-driven Z-axis
• automatically, when the protective hood is opened. Motor-driven programmable Z-axis

Applications

• Inspection of thin coatings, e.g., decorative chromium-plating
• Analysis of functional coatings in the electronics and semiconductor industries
• Measurement of electroplated mass-produced parts
• Automated measurements, e.g., on printed circuit boards

Coating thickness measurement gauge for connectors â XULM is available in various technical specifications. These are robust entry-level X-ray fluorescence measuring instruments for non-destructive material analysis and coating thickness measurement. Compact sized these devices are extensively acclaimed for their consistent performance, outstanding accuracy and longer service life. These are widely used for the non-destructive coating thickness measurement and material analysis.

Applications

• Measurements on small parts like screws, bolts and nuts
• Measurements on contacts and electronic components
• Determining of the composition of electroplating baths

Jewellery Gold testing machine XAN220 is available in a range of technical specifications for speedy and non-destructive study and coating thickness measurement of silver and gold alloys. The array of Fashion Jewellery Testing Machine is optimized X-ray fluorescence measuring instrument with compact size and reliable performance. They are used for the study of precious metals as well as their alloys in composition and coating thickness. They are used for measuring up to 24 elements in the chlorine (17) to uranium (92) range. Our products are widely celebrated for brilliant precision and long term stability. With time saving quality, functional efficiency and effective usage, the range is widely recommended by clients.

Coating thickness gauge for electroplating and electroless coatings XDV-U or X-Ray Fluorescence Tester is available in various technical specifications. These are widely used for non-destructive analyses and measurements of coating thickness on very small components and structures, even with complex coating systems.

Applications

• Measurements on very small flat components and structures such as printed circuit boards, contacts or lead frames
• Analysis of very thin coatings, e.g., gold/palladium coatings of 0.1 ¼m (0.004 mils)
• Measurement of functional coatings in the electronics and semiconductor industries
• Determination of complex multi-coating systems
• Automated measurements, e.g., in quality control

Design

• These are uniquely designed and developed with high-precision, programmable XY-stage and an electrically.
• These are user-friendly bench-top instruments acclaimed for sample stage moves into the loading position automatically, when the protective hood is opened.
• These are compact sized, robust designed and ensure longer stability. Its laser pointer works as a positioning aid and supports the quick alignment of the sample to be measured.
• These are operated through the powerful and user-friendly WinFTM® software and designed as per German regulations Deutsche Rntgenverordnung-rov". Its entire operation and evaluation of measurements as well as the clear presentation of measurement data is performed on a PC through software.

Typical areas of application are

• Analysis of very thin coatings of 0.1 ¼m (0.004 mils)
• Measurements of functional coatings in the electronics and semiconductor industries
• Determination of complex multi-coating systems
• Automated measurements, e.g., in quality control
• Determination of the lead content in solder

General Specification

• Intended use:Energy dispersive X-ray fluorescence measuring instrument (EDXRF) to determine thin coatings and alloys
• Element range:Aluminum Al (13) to Uranium U (92) up to 24 elements simultaneously
• Design:Bench-top unit with hood opening upwards XY-stage and Z-axis electrically driven and programmable, Motor-driven changeable apertures and filters Video camera and laser pointer (class 1) for orienting the sample
• Measuring direction:Top down

Coating Thickness Pocket Gauge EvaluationStatistics:Display of mean value, MIN, MAX, standard deviation, and number of measurements per blockPC softwarePC software FISCHER DataCenter with the following functionality:included in the archiving and Transferring measurement data, comprehensivescope of supply:statistical and graphical assessment, simple creation as well as printing of inspection reports.Measurement FunctionsBlock size:Adjustable between 2 & 20 single readings per blockTolerance limits:Adjustable as per the selected measuring mode

Hand-held instrument for measuring coating thickness on PC Boards and electroplated surfaces. The hand-held PHASCOPE® PMP10 is ideally suited for quality control in the electroplating and printed circuit board (PCB) industries. Because the instrument employs the phase-sensitive eddy current method (ISO 21 968), it allows the measurement of metal coatings on any substrate. A specially designed probe even enables measurements in PCB throughholes.

Applications

• Measuring copper thickness in PCB through-holes, especially on thick PC Boards.
• Measuring coating thickness of nickel on steel
• Measuring zinc or copper on steel â despite rough surfaces and complex surface geometries
• Measuring the thickness of non-ferrous metals on non-ferrous metals, given sufficient difference in conductivity, e.g. copper on brass or bronze
• Measuring the thickness of non-ferrous metals on insulating substrates, such as copper layers on circuit boards.
• Sheet metal processing
• Paint/zinc on iron, e.g. thin EPD coatings
• Paint on aluminium
• Paint on steel
• Brake line tubing
• Wire (mesh and lattice), e.g. shopping trolleys

Instrument features

• DUPLEX measuring mode: display of paint on zinc on iron or paint on aluminium
• DUAL measuring mode: display of total thickness (paint and zinc) on iron or paint on aluminium
• Extensive evaluation and statistics functions
• Outlier control and tolerance monitoring options
• Various languages to choose from
• Battery and/or continuous operation via plug-in charger (included)
• Storage of up to 20, 000 readings
• Data transfer via RS232 interface

Lead Frame Coating Thickness Measurement gauge for electroplating as well as electroless coatings X-Ray or XDV-µ Fluorescence Tester is accessible in diverse technical specifications. The range of o Lead Frame Coating is used for non-destructive analyses as well as measurements of coating thickness on very tiny components and structures with complex coating systems.

Applications

• Measurements on very tiny flat components as well as structures like contacts, printed circuit boards, or lead frames
• Study of very thin coatings like gold/palladium coatings of 0.1m (0.004 mils)
• Measurement of functional coatings in the semiconductor and electronics industries
• Determination of complex multi-coating systems
• Automated measurements like quality control

General Specification

• Intended use:Energy dispersive x-ray fluorescence measuring instrument (EDXRF) to measure thin coatings and coating systems on very small flat structures.
• Element range:Aluminum Al (13) to Uranium U (92) - up to 24 elements simultaneously.
• Design:Bench-top unit with hood opening upwards and housing with a slot on the side.
• X/Y- and Z-axis electrically driven and programmable
• Motor-driven changeable filters
• Measuring direction:Top down

Design

• These are uniquely designed and developed with high-precision, programmable XY-stage and an electrically.
• These are user-friendly bench-top instruments acclaimed for sample stage moves into the loading position automatically, when the protective hood is opened.
• These are compact sized, robust designed and ensure longer stability. Its laser pointer works as a positioning aid and supports the quick alignment of the sample to be measured.
• These are operated through the powerful and user-friendly WinFTM® software and designed as per German regulations Deutsche Rntgenverordnung-rov". Its entire operation and evaluation of measurements as well as the clear presentation of measurement data is performed on a PC through software.

Typical areas of application are

• Analysis of very thin coatings of ¤ 0.1 ¼m (0.004 mils)
• Measurements of functional coatings in the electronics and semiconductor industries
• Determination of complex multi-coating systems
• Automated measurements, e.g., in quality control
• Determination of the lead content in solder

Thin Coating Thickness Measurement Instrument for electroplating and electroless coatings is designed under the direction of knowledgeable quality controllers. The range of Thin Coating Thickness is designed for automated or manual coating thickness measurements and examination on PC-boards. They are energy dispersive X-ray fluorescence measuring instruments for the measurement and investigation of thin coatings, even at small concentrations.

Models

• XDLM 232: Manually operable XY-stage, motor-driven Z-axis
• XDLM 237: Motor-driven XY-stage that moves into the loading position
• XDLM 231: Plane support stage, motor-driven Z-axis
• automatically, when the protective hood is opened. Motor-driven programmable Z-axis

Applications

• Inspection of thin coatings, e.g., decorative chromium-plating
• Analysis of functional coatings in the electronics and semiconductor industries
• Measurement of electroplated mass-produced parts
• Automated measurements, e.g., on printed circuit boards

Coating thickness measurement gauge for connectors â XULM is available in various technical specifications. These are robust entry-level X-ray fluorescence measuring instruments for non-destructive material analysis and coating thickness measurement. Compact sized these devices are extensively acclaimed for their consistent performance, outstanding accuracy and longer service life. These are widely used for the non-destructive coating thickness measurement and material analysis.

Applications

• Measurements on small parts like screws, bolts and nuts
• Measurements on contacts and electronic components
• Determining of the composition of electroplating baths

Jewellery Gold testing machine XAN220 is available in a range of technical specifications for speedy and non-destructive study and coating thickness measurement of silver and gold alloys. The array of Fashion Jewellery Testing Machine is optimized X-ray fluorescence measuring instrument with compact size and reliable performance. They are used for the study of precious metals as well as their alloys in composition and coating thickness. They are used for measuring up to 24 elements in the chlorine (17) to uranium (92) range. Our products are widely celebrated for brilliant precision and long term stability. With time saving quality, functional efficiency and effective usage, the range is widely recommended by clients.

Coating thickness gauge for electroplating and electroless coatings XDV-U or X-Ray Fluorescence Tester is available in various technical specifications. These are widely used for non-destructive analyses and measurements of coating thickness on very small components and structures, even with complex coating systems.

Applications

• Measurements on very small flat components and structures such as printed circuit boards, contacts or lead frames
• Analysis of very thin coatings, e.g., gold/palladium coatings of 0.1 ¼m (0.004 mils)
• Measurement of functional coatings in the electronics and semiconductor industries
• Determination of complex multi-coating systems
• Automated measurements, e.g., in quality control

Design

• These are uniquely designed and developed with high-precision, programmable XY-stage and an electrically.
• These are user-friendly bench-top instruments acclaimed for sample stage moves into the loading position automatically, when the protective hood is opened.
• These are compact sized, robust designed and ensure longer stability. Its laser pointer works as a positioning aid and supports the quick alignment of the sample to be measured.
• These are operated through the powerful and user-friendly WinFTM® software and designed as per German regulations Deutsche Rntgenverordnung-rov". Its entire operation and evaluation of measurements as well as the clear presentation of measurement data is performed on a PC through software.

Typical areas of application are

• Analysis of very thin coatings of 0.1 ¼m (0.004 mils)
• Measurements of functional coatings in the electronics and semiconductor industries
• Determination of complex multi-coating systems
• Automated measurements, e.g., in quality control
• Determination of the lead content in solder

General Specification

• Intended use:Energy dispersive X-ray fluorescence measuring instrument (EDXRF) to determine thin coatings and alloys
• Element range:Aluminum Al (13) to Uranium U (92) up to 24 elements simultaneously
• Design:Bench-top unit with hood opening upwards XY-stage and Z-axis electrically driven and programmable, Motor-driven changeable apertures and filters Video camera and laser pointer (class 1) for orienting the sample
• Measuring direction:Top down