Our Products
Business And Corporate Gifts
1 Products availableIndustrial & Oil Seals
1 Products availableJigs, Casting Dies, Die Casting Moulds & Moulding Tools
1 Products availableAir Intake Systems
1 Products availableOur offered Product range includes S-207 : INTERFACE : TWO WHEELER GASKET MATERIALS, N-8094 : INTERFACE : GASKET MATERIAL, TS-9013 : INTERFACE : GASKET MATERIAL, N-8090 : INTERFACE : GASKET MATERIAL and HFL-781 : INTERFACE : GASKET MATERIAL.
Standard / Nonasbestos Gasket Material
Description:
S-207 is a cellulose fiber gasket material with controlled-swell styrene butadiene rubber binder. It is a suitable replacement for asbestos fiber gasket materials, saturated papers, and is used in many oil and coolant applications in the aftermarket. It is intended for use in applications with short duration maximum temperatures up to 180C (350F).
N-8094 Syntheseal / Nonasbestos Gasket Material is a medium density material that conforms well to irregular flange surfaces and has very good crush resistance at high flange pressures. It is intended for sealing oils, fuels, and water in applications with short duration maximum temperatures up to 180C (350F).
TS-9013 Thermo-Tork / Nonasbestos Gasket Material
Material Description:
TS-9013 is a controlled-swell material with latent cure styrene butadiene rubber binder and a blend of Aramid and cellulose fibers. It conforms well to irregular flange surfaces and is intended for water and oil applications with short duration maximum temperatures up to 290C (550F).
Additional Information:
Packaging Details : In roll Form
n-8090 syntheseal / nonasbestos gasket material
material description:
n-8090 has a latent cure nitrile butadiene rubber binder and reinforced cellulose fiber. it has excellent oil resistance, good sealing characteristics, and is intended for applications with short duration maximum temperatures up to 180c (350f). n-8090 has ul component recognition.
to view interface specification data sheet, please click:
Material Description:
NI-2085 has a nitrile butadiene rubber binder for resistance to water, coolant, oil and fuel. It has excellent strength and sealability characteristics, and is intended for applications with short duration maximum temperatures up to 190C (375F). NI-2085 has UL component recognition.
ideal for oem and aftermarket coolant and oil applications, s-8091 is a controlled-swell non-asbestos gasket material. s8091 syntheseal is a latent cure styrene butadiene (sbr binder) bound product reinforced with cellulose fiber. intended for sealing oil, fuel, and low-pressure steam applications. specifications include a short duration maximum temperature up to 180c (350f).
TN-9004 gasket material is a heavy-duty, high density nonasbestos material with a fully cured nitrile butadiene rubber binder. It has excellent resistance to fuel and oil and has good tensile strength. Thermo-Tork TN-9004 gasket material is intended for applications with high flange pressures and short duration maximum temperatures up to 350C (650F). TN-9004 has a minimum tensile strength of 2500 psi in accordance with ASTM F152 standards.
Material Description:
TS-9003 is a controlled-swell gasket material with a latent cure styrene butadiene rubber binder. It is an alternative to high-swell asbestos and nonasbestos compressed sheet materials. Its latent cure binder and heat resistant fibers give it good oil sealing characteristics at low flange pressure, and it conforms well to irregular flange surfaces. It is intended for applications with short duration maximum temperatures up to 350C (650F).
MP-15Pro-Formance / MicroPore Nonasbestos Gasket Material is designed for heavy-duty applications including compressors, diesel engines, and others. It has excellent low flange pressure sealability and bolt torque retention. It is intended for applications with short duration maximum temperatures up to 205C (400F).
NI-2095A Standard / Non-Asbestos Head Facing Material Description: NI-2095A is a cylinder head facing material designed to deliver the performance required by worldwide cylinder head applications. It is a Non-Asbestos material with inorganic fillers encapsulated by Nitrile Butadiene Rubber, and is easy to combine on perforated metal core. (Minimum order requirements may apply).
Standard / Non-Asbestos head facing material description: NI-2098 is a heavy-duty Cylinder Head Facing material that is used with both solid and perforated metal cores. It is a Non-Asbestos material with Nitrile Butadiene Rubber binder, and is compatible with most polymers used in bead printing processes.
N-8090 has a latent cure nitrile butadiene rubber binder and reinforced cellulose fiber. it has excellent oil resistance, good sealing characteristics, and is intended for applications with short duration maximum temperatures up to 180°c (350°f). N-8090 has ul component recognition.
N8092 gasket material is a Syntheseal / Nonasbestos material made of reinforced cellulose fiber with a nitrile rubber binder. It has excellent crush resistance at high flange pressures, and excellent sealing properties with oil, fuel, and water. N-8092 gaskets are intended for applications with short duration maximum temperatures up to 180C (350F) and are commonly used in automotive, small engine, light duty compressor, and general purpose aftermarket applications.
2750 is a general purpose aftermarket grade gasket material suited for air, coolant, and oil sealing applications. it has excellent compressibility, strength, and sealability characteristics, and is intended for applications with short duration maximum temperatures up to 190oc (375of).
2755 is a general purpose aftermarket grade gasket material suited for air, coolant, and oil sealing applications. it has excellent compressibility, strength, and sealability characteristics, and is intended for applications with short duration maximum temperatures up to 190oc (375of).
S-207 is a cellulose fiber gasket material with controlled-swell styrene butadiene rubber binder. It is a suitable replacement for asbestos fiber gasket materials, saturated papers, and is used in many oil and coolant applications in the aftermarket. It is intended for use in applications with short duration maximum temperatures up to 180°C (350°F).
CMP-4200 is a solvent-free, high performance compressed micropore gasket material. It was developed for steam, water, oil, and chemical resistance in original equipment and industrial applications. It has exceptional sealability, torque retention, crush and blowout resistance, and is intended for applications with short duration maximum temperatures up to 350°c (650°f).
TS-9013 is a controlled-swell material with latent cure styrene butadiene rubber binder and a blend of Aramid and cellulose fibers. It conforms well to irregular flange surfaces and is intended for water and oil applications with short duration maximum temperatures up to 290°C (550°F).
tn-9001 is a heavy-duty latent cure material with nitrile binder. it has excellent oil resistance and is intended for applications with short duration maximum temperatures up to 400c (750f).
217SP is a medium density asbestos-free gasket material. It is an aramid fibre reinforced material with a blend of fillers & fibres bound with NBR-Latex. It is mainly used to seal against cold and warm oil, water and anti-freeze. It is intended for applications with maximum temperatures up to 250°C (480°F).
N8092 gasket material is a Syntheseal® / Nonasbestos material made of reinforced cellulose fiber with a nitrile rubber binder. It has excellent crush resistance at high flange pressures, and excellent sealing properties with oil, fuel, and water. N-8092 gaskets are intended for applications with short duration maximum temperatures up to 180°C (350°F) and are commonly used in automotive, small engine, light duty compressor, and general purpose aftermarket applications.
N-8094 Syntheseal® / Nonasbestos Gasket Material is a medium density material that conforms well to irregular flange surfaces and has very good crush resistance at high flange pressures. It is intended for sealing oils, fuels, and water in applications with short duration maximum temperatures up to 180°C (350°F).
216SP is a medium density gasket material for use in sealing applications and is composed of a select blend of fillers & fibres with a NBR binder. It offers excellent saleability at low flange loads and good resistance to oil, fuel and transmission fluids. It is intended for applications with maximum temperatures up to 220°C (420°F).
NI-2095A is a Cylinder Head Facing Material designed to deliver the performance required by worldwide cylinder head applications. It is a non-asbestos material with inorganic fillers encapsulated by Nitrile Butadiene Rubber, and is easy to combine on perforated metal core.
NI-2098 is a heavy-duty Cylinder Head Facing material that is used with both solid and perforated metal cores. It is a Non-Asbestos material with Nitrile Butadiene Rubber binder, and is compatible with most polymers used in bead printing processes.
MP-15 Gasket Material MP-15 Pro-Formance® / MicroPore® Nonasbestos Gasket Material is designed for heavy-duty applications including compressors, diesel engines, and others. It has excellent low flange pressure sealability and bolt torque retention. It is intended for applications with short duration maximum temperatures up to 205°C (400°F).
TN-9001 is a heavy-duty latent cure material with nitrile binder. It has excellent oil resistance and is intended for applications with short duration maximum temperatures up to 400°c (750°f).
USPs & Strengths
USPs & Strengths
CMP-4000 gasket material is a high performance, compressed micropore material that combines a unique synthetic fiber matrix with a fully cured nitrile butadiene rubber binder. Hydro-fused® cmp-4000 gaskets have excellent sealability and torque retention properties and are recommended for short duration maximum temperatures up to 350°c (650°f). Typical OEM and industrial applications for CMP-4000 gaskets include engine, transmission, hydraulics, pumps, valves, pipes, and compressors that operate from -40°c to 150°c and from 0 to 40 bar internal pressure. Applications outside this temperature and pressure range can be considered with proper validation testing.
NI-2085 has a nitrile butadiene rubber binder for resistance to water, coolant, oil and fuel. It has excellent strength and sealability characteristics, and is intended for applications with short duration maximum temperatures up to 190°C (375°F). NI-2085 has UL component recognition.
TN-9004 Gasket Material TN-9004 gasket material is a heavy-duty, high density non asbestos material with a fully cured nitrile butadiene rubber binder. It has excellent resistance to fuel and oil and has good tensile strength. Thermo-Tork® TN-9004 gasket material is intended for applications with high flange pressures and short duration maximum temperatures up to 350°C (650°F). TN-9004 has a minimum tensile strength of 2500 psi in accordance with ASTM F152 standards.
HFL-781 is a high density, controlled swell gasket material with styrene butadiene and natural rubber binders. it is used in heavy duty oil sealing applications such as diesel engine oil pans and front covers. it is intended for applications with short duration maximum temperatures up to 290°c (550°f). the following specification values are for 0.8mm (0.031”) gauge material.
S-8091 non-asbestos gasket material ideal for OEM and aftermarket coolant and oil applications, S-8091 is a controlled-swell non-asbestos gasket material. S-8091 syntheseal® is a latent cure styrene butadiene (SBR binder) bound product reinforced with cellulose fiber. intended for sealing oil, fuel, and low-pressure steam applications. specifications include a short duration maximum temperature up to 180°c (350°F). ASTM F-104
2755
standard/nonasbestos gasket material
f729990e59m9
2755 is a general purpose aftermarket grade gasket material suited for air, coolant, and oil sealing
applications. it has excellent compressibility, strength, and sealability characteristics, and is intended
for applications with short duration maximum temperatures up to 190oc (375of).
2750
standard/nonasbestos gasket material
f729990e59m9
2750 is a general purpose aftermarket grade gasket material suited for air, coolant, and oil sealing
applications. it has excellent compressibility, strength, and sealability characteristics, and is intended
for applications with short duration maximum temperatures up to 190oc (375of).
TS-9003 is a controlled-swell gasket material with a latent cure styrene butadiene rubber binder. It is an alternative to high-swell asbestos and nonasbestos compressed sheet materials. Its latent cure binder and heat resistant fibers give it good oil sealing characteristics at low flange pressure, and it conforms well to irregular flange surfaces. It is intended for applications with short duration maximum temperatures up to 350°C (650°F).