Finepac Structures Pvt Ltd

Bhosari, Pune, Maharashtra

We are a leading Manufacturer & Exporter of process systems for a wide range of Oil & Gas Internal Products. We custom-build all our processing systems to meet both clients specifications and demands of onsite conditions. The scope of supply includes design of columns internals for fixed and floating production systems, gas/liquid/solid separation equipment, gas conditioning and liquid processing equipment, computational fluid dynamic studies and heat exchanger equipment. While every installation is unique, each system built benefits from our extensive experience. Vane Pack Vane Pack is designed to separate entrained liquid from gas stream. The basic design consideration is particle size of the liquid droplets entrained & physical properties of the fluid to estimate pressure drop throughout & efficiency.

• Vane Pack offers a complete range of efficient vane packs for both horizontal & vertical flow.
• Size of mist droplets which Finepac separate= 10um or larger (under atmospheric pressure maximum pressure drop 10 bar.)

Vane Inlet Device

• The vane type inlet device dissipates the momentum of the inlet gas via a change in direction & velocity hence allowing more efficient separation via the main separation internal.
• Vane type inlet device reduces gas velocities flowing over the liquid surface preventing re-entertainment of previously collected liquid off the liquid surface.

Baffles In liquid-liquid separation, it is essential to achieve laminar flow through Vessel. Perforated Plates are used to promote this condition. Baffles Plates can have either single or multiple skins (Double Plate). Demister Pad (Mesh Pad)

• In the most familiar application of knitted mesh, the crimped strips are stacked to form a pad with typical thickness of four or six inches.
• Rigidity is provided by a frame usually metal consisting of a grid on each side and rods passing through the mesh. Pads larger than about three feet across are fabricated in sections narrow enough to pass through a man way for assembly inside a vessel.

Such mesh can efficiently capture mist droplets as small as 5 microns (micrometers)

Static Mixers are a series of geometric mixing elements fixed within a pipe which use the flow stream to create mixing between two or more fluids. Static Mixers are used to mix liquid-liquid, liquid-gas and gas-gas. Finepac Structures study mixing application & accordingly design the efficient & fabricate the static mixer.

 

Features :

• The device consists of mixer elements contained in a cylindrical or squared housing and element consist of series of Multidirectional channels
• Material of Construction in :
  • Ss316
  • Ss304
  • Special Alloy Exotic Metal
  • PTFE lining

   

Advantages :

• No needs of Tanks, agitator etc
• Available in very compact size
• No moving parts
• Low pressure dry
• Shorter in length

 

Static Mixer is used in different mixing tasks like :

• Blending : Two Soluble components are mixed together to achieve homogeneity
• Dispersing : Two insoluble components are mixed together to achieve required droplet size and Mass transfer

 

Parameter for Designing Mixer :

• Flow Rate of each component to be mixed
• Viscosities, surface tension and specific gravity
• Viscosity important parameter in mixer designing. Viscosity ratio of various streams is most important for mixing efficiency

 

Typical Examples :

• Mixing of reactants in nitration plant
• Waste water treatment plant & sugar industry
• Chemical & Petrochemical industries, Drug formation, Unit : mixing of ingredients
• Air/Ammonia gas mixing in case of nitric acid plant
• Water Heating
• Mixing of Petroleum Components
• Diluting Concentration & Mixing Flavoring

We offer to our esteemed clients an array of conventional and customized Random Packings that enable organizations to choose the best possible option for maximum outputs. Our Random Packings are made with best quality raw material for durability. Our Random Packings are well tested on the strict industry parameters for best results.

 

Types :

• Pall Ring
• IMTP Saddle
• Ceramic Saddle
• C-Rings
• Raschig Ring

Finepac Structures Pvt Ltd is a well-known Manufacturer, Exporter and Importer of premium quality Column Packings. The Column Packings offered by us are suitable for heat transfer, absorption and stripping applications in oil & gas, petrochemical and chemical industries. The unequaled shape and external geometry of these Column Packings forbid it from interlocking and confirm the entropy and most favorable surface area in the packed bed. Further, we make available these Column Packings in low-pressure drop, plugging resistant and low bed height types. Clients can also avail customized Column Packings from us as per their requirements. Applications :

• Heat transfer (refinery fractionators and olefin plant quench columns)
• Absorption and Stripping (where high capacity and numerous stages areneeded)
• Distillation towers

Features :

• Facilitate superior separation with smaller column heights
• High efficiency
• Energy savings
• Lessens heat load requirement
• Low pressure drop across the bed results in lower bottom temperatures
• Lower liquid hold-up
• Cost-effective

Market Areas :Delivering bulge array of products in limited time frame has carved a niche in the markets of India and other abroad countries like Indonesia, Russia, Korea, Singapore, Italy, Malaysia, Iran, UK, Thailand, Japan, South Africa, U.A.E., and much more. Thus, various clients are placing orders for the requirements of these products and so we have started supplying our ranges to following targeted areas: Domestic Market :In India : West-Bengal, Haryana, Assam, Karnataka, Maharashtra, Gujarat, Uttar-Pradesh, Andhra-Pradesh, Kerala, Madhya-Pradesh, Punjab, Tamil-Nadu, Himachal-Pradesh, Jammu-&-Kashmir, etc. International Market :UK : Bath, Exeter, Canterbury, Armagh, Durham, Coventry, Bradford, Cambridge, Aberdeen, Derby, Chichester, Bangor, Birmingham, Hereford, Bristol, Gloucester, Brighton-and-Hove, Ely, Carlisle, Chester, etc. Middle East : Israel, Turkey, Syria, Oman, Lebanon, Jordan, Qatar, Cyprus, Yemen, Iran, Iraq, Egypt, Kuwait, Saudi-Arabia, Bahrain, United-Arab-Emirates, etc. Asian Developing Countries : Bhutan, Indonesia, Bangladesh, Tajikistan, Japan, Thailand, Georgia, Azerbaijan, India, South, Timor-Leste, Korea, Malaysia, Brunei, Kyrgyzstan, Mongolia, Vietnam, Armenia, Pakistan, Singapore, China, Maldives, Sri-Lanka, Kazakhstan, Laos, Cambodia, Nepal, Philippines, Uzbekistan, etc. Russia : Achinsk, Abinsk, Agryz, Abakan, Akhtubinsk, Alapayevsk, Ak-Dovurak, Alagir, Abdulino, Agidel, Abaza, Adygeysk, Aksay, etc. South Africa : Port-Elizabeth, Cape-Town, Bloemfontein, Vereeniging, Johannesburg, Newcastle, Soweto, East-London, Durban, Welkom, Tembisa, Boksburg, Benoni, Pretoria, Pietermaritzburg, etc.

Finepac Structures Pvt Ltd is a well-known Manufacturer, Exporter and Importer of premium quality Column Packings. The Column Packings offered by us are suitable for heat transfer, absorption and stripping applications in oil & gas, petrochemical and chemical industries. The unequaled shape and external geometry of these Column Packings forbid it from interlocking and confirm the entropy and most favorable surface area in the packed bed. Further, we make available these Column Packings in low-pressure drop, plugging resistant and low bed height types. Clients can also avail customized Column Packings from us as per their requirements.

 

Applications :

• Heat transfer (refinery fractionators and olefin plant quench columns)
• Absorption and Stripping (where high capacity and numerous stages areneeded)
• Distillation towers

 

Features :

• Facilitate superior separation with smaller column heights
• High efficiency
• Energy savings
• Lessens heat load requirement
• Low pressure drop across the bed results in lower bottom temperatures
• Lower liquid hold-up
• Cost-effective

 

Market Areas : Delivering bulge array of products in limited time frame has carved a niche in the markets of India and other abroad countries like Indonesia, Russia, Korea, Singapore, Italy, Malaysia, Iran, UK, Thailand, Japan, South Africa, U.A.E., and much more. Thus, various clients are placing orders for the requirements of these products and so we have started supplying our ranges to following targeted areas: Domestic Market : In India : West-Bengal, Haryana, Assam, Karnataka, Maharashtra, Gujarat, Uttar-Pradesh, Andhra-Pradesh, Kerala, Madhya-Pradesh, Punjab, Tamil-Nadu, Himachal-Pradesh, Jammu-&-Kashmir, etc.

 

International Market : UK : Bath, Exeter, Canterbury, Armagh, Durham, Coventry, Bradford, Cambridge, Aberdeen, Derby, Chichester, Bangor, Birmingham, Hereford, Bristol, Gloucester, Brighton-and-Hove, Ely, Carlisle, Chester, etc.

 

Middle East : Israel, Turkey, Syria, Oman, Lebanon, Jordan, Qatar, Cyprus, Yemen, Iran, Iraq, Egypt, Kuwait, Saudi-Arabia, Bahrain, United-Arab-Emirates, etc.

 

Asian Developing Countries : Bhutan, Indonesia, Bangladesh, Tajikistan, Japan, Thailand, Georgia, Azerbaijan, India, South, Timor-Leste, Korea, Malaysia, Brunei, Kyrgyzstan, Mongolia, Vietnam, Armenia, Pakistan, Singapore, China, Maldives, Sri-Lanka, Kazakhstan, Laos, Cambodia, Nepal, Philippines, Uzbekistan, etc.

 

Russia : Achinsk, Abinsk, Agryz, Abakan, Akhtubinsk, Alapayevsk, Ak-Dovurak, Alagir, Abdulino, Agidel, Abaza, Adygeysk, Aksay, etc.

 

South Africa : Port-Elizabeth, Cape-Town, Bloemfontein, Vereeniging, Johannesburg, Newcastle, Soweto, East-London, Durban, Welkom, Tembisa, Boksburg, Benoni, Pretoria, Pietermaritzburg, etc.

We are offering demister pad, in the most familiar application of knitted mesh, the crimped strips are stacked to form a pad with typical thickness of four or six inches. Rigidity is provided by a frame usually metal consisting of a grid on each side and rods passing through the mesh.pads larger than about three feet across are fabricated in sections narrow enough to pass through a man way for assembly inside a vessel.such mesh can efficiently capture mist droplets as small as 5 microns (micrometers)

Saddle rings, third generation, offer high efficiency and low pressure drop. Thesehigh performance random packings are the chemical industry's most commonrandom packing type. Metal packings are available in mocs like ss 316/304 and ssalloys, c.s., copper & aluminium etc.

We provide Tough Type Distributors that are high quality. These Tough Type Distributors comprise of a pre distribution trough placed above the many equidistant narrow troughs. Our Tough Type Distributors are meant for long term usage and are exceptionally high performance.

We present superior quality Metal Saddles to our clients. These Metal Saddles are durable due to the usage of high grade metals as the raw material in the production procedures. Our metal saddles come in accurate dimensions and impart long term usage. These Metal Saddles are corrosion free and made available at industry leading prices.

 

Metal Packagings Are Available In MOCs Like :

• S.S 316/304 and S.S. alloys
• C.S.
• Copper
• Aluminum Etc.

Plastic Packing Available In :

• P.P.
• HDPE
• LTHA grade P.P.& PVDF, mostly used for acidic & alkaline media in gas absorbers & aeration plants
• Home Polymer grade P.P is suitable up to 95o C
• LTHA grade P.P. is suitable up to 130oC
• HDPE is suitable up to 85 degree Celsius
• PVDC is suitable up to 140 degree Celsius

Check chemical compatibility at maximum operating temperature.

 

Available In :

• 25 mm
• 38 mm
• 50 mm
• 75mm

We are the chief manufacture, exporter and importer of the high performance Channel Type Liquid Distributors. Our Channel Type Liquid Distributors are highly efficient and durable. We have a state-of-the-art facility for testing the performance of the liquid distributors. <b>Liquid Distributor :</b> <ul><li><b>Channel type Distributor :</b> It is in single piece or segmented distributor with integral channel</li><li><b>Liquid Distributor VEP :</b> Large hole dimension than conventional discharge systems</li><li><b>Liquid Distributor :</b> Trough type</li><li>Pipe Type Liquid Distributor</li><li>Chimney Tray</li><li>Liquid Distributor cum Collector</li></ul>

We present to our clients superior quality Liquid Distributor cum Collector that is designed as per the international standards to ensure high performance and stability. Our Liquid Distributor cum Collector renders long term usage and is cost effective.

Finepac Structures Pvt Ltd is a Pune (Maharashtra) based company, specialized in Process Design Services. As we have an experience in Mass Transfer equipment design from last 24 Years, we design a distillation column as per clients requirement. From last 24 years, we have designed many columns for different applications. Our proprietary software, UNISIM R-400 determines critical design elements, assisting in the selection of the most efficient packings and internals for a specific application. In process design we can provide

• Process Simulation by Using UNISIM
• Process Design of Heat Exchangers
• Distillation Column Hydraulics
• Mechanical design & drawing of all equipments
• P & ID Diagram
• High Throughput Capacity.
• Turn Key System

We specialize in designing Packed/Tray Column as per clients requirements from basic process design to engineering of equipment and Commissioning. We do turnkey project from enquiry to commissioning of column. We do Process Simulation, Validation of data and results, detailed design, GA drawing, engineering drawing, P & ID and commissioning of Distillation column. We also redesign clients existing column as per his requirement. So we revamp structured packing, redesign distillation column with considering his existing parameter and equipment. Software

• Unisim 400 : For Process Simulation
• Designer Desktop : For mechanical equipment design
• Pack Col : For Random packing Design & hydraulic
• SEP-Calc : For Oil and Gas Internals design/ 3-phase separator design

Distillation Process

• Continuous/ Batch Column
• Azeotropic Distillation
• Liquid Liquid Extraction
• Laboratory Distillation
• Vacuum Distillation

Images of P & ID, Process Simulation snaps of Unisim, column, heat exchanger Process Simulation Snaps of Unisim