Fine Manufacturing Industries

Miraj, Sangli, Maharashtra

Suitable for Torsion and twist on various metal rods metal and flatsTorque measurement by Pendulum Dynamometer system.Auto torque selector to adjust torque to specimen through gear box.Autographic Recorder for relation between torque and angle of twist.Accuracy 1% of the true torque

We are manufacturers and supplier of this products.

These models are suitable for testing metals and iron, Plastics, Rubber, Ceramics, Fabrics , Composites, Cables and wires.Load is measured through a strain gauge based Load Cell and elongation is through rotary encoder.Depending upon the customers requirement a suitable type of grips are available. Extra Load cell can be offered suitable for low load samples.

Measuring Capacity (N) 2500 5000, Measuring Range(N) 0-2500 0-5000, Least Count(N) 0.1 0.2, Load Range in N with accuracy of measurement : 1 % 2 % to 100 % 2 % to 100 %, Maximum clearance between crosshead in : mm 250 250

Max. test force 2000 KN, Load range 0 - 2000kN, Load accuracy 1% from 2% to 100% of machine capacity, Load resolution 0.1 kN (20000 counts), Testing space 240 240 80450 mm

This is designed to reveal the cupping qualities of metal sheets & strips and also to test the adhesion, elasticity & porosity of coats of paints or varnish by way of comparison. The appearance of the material after fracture gives an indication of the grain structure to some extent. The machine conforms to IS 10175-1982.

Universal Testing Machines have a wide range of applications and number of materials, metals in different form and shapes can be tested for variety of tests like Tension, Compression, Transverse, Bend, Shear, Brinell Hardness etc.Special attachments are also available for testing of Flat Belts, Chain Links, Wire Ropes etc.

This is designed to reveal the cupping qualities of metal sheets & strips and also to test the adhesion, elasticity & porosity of coats of paints or varnish by way of comparison. The appearance of the material after fracture gives an indication of the grain structure to some extent. The machine conforms to IS 10175-1982.

Tests like Tension, Compression, Transverse, etc. are conducted.Autographic Load Vs Elongation recorder is fitted.A wide range of metallic materials can be tested.Such as Mechanical Extensometer, Load-Stabilizer, Attachments for Brinell test, Tensile test for shouldered & threaded, Single & Double shear test, Bolts-Nuts & Washer test, Rope test, Flat Belt test, Bend-Rebend test, 180 Bend test, Pull-Out test, etc. are available.

FMI make the 'F' series machines are electronic screw driven machine with precision screw and column construction and variable speed drive. These are high precision high performance universal testing machines, maximum capacity up to 200 kN. With the help of computer and micro-computer from control of load to processing of data are carried out with excellent performance, reliability, flexibility and easy operation. The machines are suitable for studding mechanical behavior of various materials like iron & metals, rubber, plastics, ceramics, fabrics, composites, cables and wires. As a matter of fact, it is an indispensable instrument for the modern industries. Two options are available mainly acme threaded screw AC motor drive and ball screw with servo drive. The machines confirms to IS, BS & ASTM standards.

Full fledged sealed membrane alpha numeric keyboard for data entry 16 x 2 Lines LCD Graphics display with backlit for displaying Load and Elongation of crosshead with bigger font size.Load indicated with resolution of 0.01% of machine capacity for entire range.Auto detection of overload and over travel and specimen break. On detection of any condition electrical motor is automatically turned off.

This is low cost Impact testing machine & it is specially designed for engineering colleges.This Machine conforms to IS 3766-1977, IS 1598-1977, IS 1757-1988, IS 1499-1977 and BS 131 Part I, II, III, IV. standard.New modified Brake drum unit is provided to stop the pendulum swing instantly after test.Safety guard is provided for operator safety.

This machine is used to test the Fatigue strength of materials and to draw S-N Diagram by research institutes, Laboratories, material manufacturers and various industries. This is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibers of the specimen is produced during each revolution. The bending moment is applied with a lever system and can be easily changed by moving weight over the lever. Total number of revolutions at which the specimen fails is recorded by a Digital Counter. An interlocking system puts off the motor at specimen failure, Machine meets requirements of IS 5075-1959.

FMI makes range of spring tasting machines are used for quick and accurate testing of tension and compression spring. manual loading and unloading arrangement.High precision load cell for measurement of force & scale for displacement measurement.

We are well-reputed as one of the staggering Digital Torsion Testing Machine Exporters from India. The use of optimum quality materials in the manufacturing of the Torsion Testing Machine ensures high durability, tensile strength and resistivity to adverse conditions. The Computerized Torsion Testing Machine is also available in the array that is widely demanded due to the advanced features that make the machines easy to operate and maintain. Additionally, customers are eased with the availability of the advanced Torsion Testing Machines that comply with the international quality norms. Applications : This Machine applies a torque on the specimen held in its chuck and measures the twist. The machine is useful for material manufacturers, Research Institutions, Testing Laboratories, Educational Institution etc. to test metals. Models : FTT-100, 200, 500, 1000, 2000 Nm (Capacity ranging from 100 Nm to 2000 Nm) Accuracy & Calibration : Every machine has the accuracy of 1% of the true torque and calibrated according to standards set by IS, BS, ASTM, etc. Salient Features

• Suitable for Torsion and Twist test on various metal rods and flats.
• Torque measured by pendulum dynamometer system.
• Geared motor to apply torque to specimen through gear box.
• Set of jaws to accommodate different size and diameter of test specimens provided.
• Computerised torsion testing machine is also available.

FMI makes range of spring testing machines are used for quick and accuratetesting of tension and compression spring.Features:-manual loading and unloading arrangement .High precision load cell for measurement of force &scale for displacement measurementmicroprocessor based electronic with tare facility.

Rockwell Harness Tester Model TRS Series

Features

• For charpy, lzod Tests for various materials.
• Model FIT-300-N is a per is3766-1977, is 1598-1977, IS 1757- 1988, IS 1499-1977 and BS 131 Part I , II, III, IV .
• Model FIT -300 -EN & +FIT-300-D Conforms to is , BS Standards as above & also conssorms to BS EN 100456-1993 (For Charpy)
• Works on pendulum principle, Difference between height of deop of pendulum before Rupture & Height of rise after Rupture of specimen is deirectly proportional to imapct energy absorbed.
• Direct indication of impact energy absorbad by specimen on large dial for FIT-300-N, FIT-300-EN and on Digital Dispaly for FIT-300-D.
• Safety guard for the Pendulum.

We are reckoned as one of the stupendous Hydraulic Computerized Universal Testing Machine Exporters from India. The materials used in the manufacturing of the Computerized Universal Testing Machine are of optimum quality that ensures high durability, tensile strength and resistivity to adverse conditions. The Computerized Universal Testing Machines are widely demanded in the market due to the unmatched quality and unsurpassable performance in respective applications. Additionally, customers are eased with the availability of the Computerized Universal Testing Machines loaded with all the advanced features. Features : Universal Testing Machine have a wide range of applications. Anumber of materials, metals in different form and shapes can be tested for variety of tests like Tension, Compression, Transverse, Bend, Shear, Brine Hardness etc. Special attachments are also available for testing of Flat Belts, Chain Links, Wire Ropes etc. Loading Frame : The base has a hydraulic cylinder at its center and two main screws at both ends. The middle cross head is mounted on screws through main nuts. the middle cross head can be moved up or down through chain transmission and geared motor to adjust the initial tensilel compression clearance. On the piston, rests an assembly of upper, lower cross head and two columns. The individually lapped cylinder piston assembly ensures smooth axial force with minimum friction. Control Panel : Hydraulic circuit - it consists of hydraulic power pack which has a directly driven radial plunger pump which gives a continuous non pulsating flow of oil pressure up to 250 bar. a pressure compensated needle type flow control valve is provided to control the oil flow to cylinder there by achieving a desired piston speed. Infinitely variable speeds an be obtained with help of valves. Optionally this can be controlled from electronic control system. Loading Rate / Straining Rate Control : This is superfine controlling system which controls loading rate I straining rate as per commands from electronic machine control system. With UP / DOWN Keys on electronic control system loading ratel straining rate is adjusted. Fine UTM Software can send loading rate / straining rate to electronic control system. Load Measurement System : The oil pressure in the main cylinder is also transferred to an electronic pressure transducer which goes proportionate signal to computer electronic unit. both the motors for hydraulic operation and cross head motion are controlled by buttons on electronic control system and they have interlocks to prevent simultaneous working of motors. The electrical panel is housed in control panel. Displacement measurement is carried out by means of a rack and pinion on rotary encoder. Encoder signal is fed to electronic control system to get displacement. Operation : Tension test is conducted by gripping the test specimen in the upper and middle cross head. Compression, Bending, Transverse, Shear and Hardness tests are conducted between the middle and lower cross head by using appropriate fixtures. The rapid adjustment of middle cross head facilities easy fixing of tensile I Compression specimens of different lengths. Hydraulic controls are through hand operated valves, ergonomically placed for ease of control. Optionally valves can be controlled from electronic control system. Adequate safeties for over load and over travel are incorporated and emergency switch is provided. Accuracy & Calibration : Every machine is calibrated in accordance with procedure laid down in BS - 1610 - 1964 IS 1828 - 1991. 'FMI' Computerised Universal Testing Machines comply with grade A of BS 161()"1964 and Grade 1.0 of IS 1828 - 1991. An accuracy of + -1% guaranteed from 2% to 100% of capacity of the machine. in the computerised UTM, the computer is an integral part of the entire system and not just on ADD - ON feature. This puts a lot of power and versatility into the hands of the operator and makes the system much more self contained then usual, as it includes many functions usually only available as additional (often expensive) optional features.

Features :

• For Charpy tests on various materials
• Strictly conforms to ASTM-E-23- Current Standard.
• Works on Pendulum Principle, Difference between height of drop of Pendulum before Rupture and Height of rise after Rupture of specimen is directly proportional to impact energy absorbed by specimen on large dial./ Digital readout.
• Two hand Pendulum release operation for operator safety.
• Large safety guards on both sides of Pendulum.
• NIST approval of machine with samples from NIST, USA can be arranged
• Motorised with higher capacity impact machine is also available

Standard Accessories

• (For Model FIT-300-ASTM)
• Charpy Striker-1No.
• Charpy Support Block-1set
• Specimen Setting Gauge (For Charpy)-1No.
• Set of Spanners-1Set
• Foundation Bracket-1No.

Optional Accessories

• Self centering tong for Charpy test Specimen. (Usefull particularly for carrying out tests at sub zero temp.)
• Sub zero temp.bath with digital calibrated temperature indicator.
• GO-NO GO, Gauges for specimens confirming following parameters within specified limits.
• Centre line of notch from both ends
• Angle of V notch
• Depth below standard V notch
• Cross section of 10 x 10 mm specimen.
• Miling cutter for V notch
• Lateral Expansion gauge as per ASTM-E-23
• Standard Impact specimen for verification of machine from NIST, USA (We also undertake calibration of machines of any make, as per ASTM-E-23 Including approval from NIST, USA)

digital rockwell hardness tester trsn - d series salient features :

• 21 x 8 unes lcd graphics displaywith backlit
• minor load is graphically displayed on lcd screen
• keyboard data entry for serial no, batch no, no. of readings for average, cylindrical correction, date and time.
• dual time setting for major load 1 to 99 sec.
• battery backup real lime clock for test results time stamp
• results are displayed in big font size
• for average option, upto 9 previous results are displayed on screen. average and standard deviation values are displayed after completion oftest.
• 500 resuhs are stored in the system with automatic result data entry in storage.
• user can enable result storage in system or disable it. a batch wise reports and stastcal reports are displayed on screen and printed on printer
• at a time user can see 7 readings on lcd display and he can scroll with up/down keys
• automatic selected weight detection
• user can select appropriate scale according to weight selected
• motorised automatic loading or manual loading is selectable
• rockwell. rockwell superficial and rockwell cum bnnell hardness testers
• conversion of results from rockwell to brinell (hb, vickers (hv), knoop (hk), tensile strength (ksi), microficial (wmn)
• serial port for dot matrix printer or thermal printer interface
• print result consists of batch no. serial no, date lime, hardness value and hardness scale
• rs232c port can be programmable. baud rate and parity can be selected as per customers need.
• these models strictly conforms to is 1586 - 2000, bsen - iso - 6508 - 2, astm - e - 18 for rockwell test and is2281 - 1983, bs240, astm - e - 10forbrinelitest and is 1586 - 2000, astm - e - 18 for rockwell superficial test