Our Products
Filters & Filtration Systems
1 Products availableDust Collectors
1 Products availableWire Mesh
1 Products availableLeading Manufacturer, Supplier & Retailer of Liquid Filter Bags, dust collection conventional bags, Catalyst Recovery Systems and Cartridges.
Filter Concept Pvt. Ltd. is one of the leading Bag vessel assemblies exporters. Bag vessel assembly keeps the filter system on stream by reducing bag filter change time. Bag vessel assemblies are portable and light weight. Bag vessel assemblies advantages are High efficiency filtration, Dynamic large 'O'-ring seal and Knife edge sealing.
Flow Rate
Capacity:Up to 15000 lits /hr Per Unit & More
Operation:
Unfiltered fluid enters the housing and is distributed evenly around the filter bags. Filtration takes place from inside to outside. Solids are collected on the inside of filter bag for easy removal. The filtered fluid then exits through the outlet pipe.
Material Of Construction [MOC]-Bag Filter Housing
O-ring - Buna-N / EPDM / Silicone
Cap - Polypropylene
Sump - Polypropylene
Gauge - Brass (Optional)
Vent Plug - Polypropylene
Drain Plug - High density Polypropylene (Opt.)
Ball Valve - PVC / Buna-N Seals (Optional)
Basket - Polypropylene / SS 304
Gasket - Buna-N
SIZES
Bag filter system suitable for
4 x 10 Long Filter Bag
4 x 17 Long Filter Bag
6 x 20 Long Filter Bag
Available End connections
1 NPT Inline
1.5 NPT Inline
2 NPT Inline
Filter Concept Pvt. Ltd. is one of the leading Liquid filter bags exporters. Filter bags are manufactured for optimum filtration performance. These type of filter bags are made from carefully selected media, according to the specifications of the process industry. Various types of media are used such as needle felt, monofilament and multi-filament. They are effective in removing solid particulate from liquids where large volumes of contamination are present or where highly viscous fluids are required to be filtered. They offer an effective solution to many filtration problems.
Flow Rate
1, 5 , 10 , 20 , 50 , 100 , 200 Micron
Operation:
Filtration takes place as the liquid flows from the inside of the filter bag to the outside.
Needle felt filter bags utilize the reliable mechanisms of depth filtration and have a high dirt holding capacity. Mesh filter bags utilize the well proven mechanisms of surface filtration and are effective in removing large solid particulate or agglomerates from the liquid flow.
Filter bag replacement is simple. All debris and contamination removed from the liquid is held inside the bag which is lifted from housing after opening the top lid or bowl and disposed of in accordance with environmental regulations.
Filter Concept Pvt. Ltd. is one of the leading Sintered Multi Layered Wiremesh exporters. Sintered multilayer wire mesh bags are designed for high temp Application of Industries. It can be used for high temperature up to 480C. It has one standard combination of 5 Layers sintered wire mesh made from stainless steel which is brought together through vacuum sinter, compression and rolling and made into a kind of porous material.
Large filtration area, from 1 Micron to 100 Micron for absolute filtrationSteady filter rating, as it has two protective layers and sinter arts, the mesh of the filter layer is not easy to changeHigh mechanical strength & excellent resistance to pressure due to fourth and fifth layers reinforcedEasy to wash, specially back washingEasy to wash, specially back washingHeat resistance , Heat resistance up to 480CCorrosion resistanceTractability, suit to cut, punching, wrap
Filter Concept Pvt. Ltd. is one of the leading dust collection non woven filter bags exporters. Filter bags are manufactured for achieving optimum filtration performance. They are made from carefully selected media. Various types of media are used such as needle felt, monofilament and multi-filament. They are effective in reducing dust emission levels as per requirement of industries. These bags are placed in dust collector with supporting filter cages. Contaminated air takes path of outside to inside filtration. All solid contaminants get deposited at outer surface & clean air / gas passes through top chamber. Particles retained at the outer surface of media get collected at the bottom of dust collector with the help of shaking mechanism or reverse pulse jetting mechanism
Catalyst recovery systems are normally used to recover the precious catalyst where in system required to recover fine particles of catalyst [such as platinum, palladium, rhenium and rhodium, Raney nickel, rhodenium ] after it is used. These systems used in almost all industries like petrochemicals, pharmaceuticals, Refineries, Edible oil etc.
Catalyst Recovery Systems Construction:
Catalyst recovery systems are constructed of filter housings, special type of filter elements, back purging mechanism, Control panels & other instrumentation. Catalyst recovery systems can be offered in various materials like SS-304, SS-316, SS-316L, Duplex material, carbon steel and alloy metal. Filter elements can be offered with Stainless steel wire mesh, Sintered metal powder, Random fiber / Sintered metal fiber, multi layered wire mesh. Filter elements are selected based on its applications demands.
Customers can use pneumatically or electrically operated butterfly valve or ball valve as per their process requirement. Control panels can be offered with FLP (flame proof) and non-FLP, depending upon the process requirement.
Material Of Construction [MOC]-Bag Filter Housing
Super Duplex, Duplex Stainless steel 2205
Stainless Steel-316L
Stainless Steel-316
Stainless Steel-304
CARBON STEEL (ALL GRADE)
ALLOY METALS
Apart from base material we can offer LEAD LINING, RUBBER LINING, TEFLON coating on Any Metal
Configuration of Cartridges
Code 7 (226 O' Ring) Design
Code 3 (222 O' Ring) Design
NPT Threaded Connection Type
Gasket / O Ring Material
Neoprene , Nitrile, Silicone, Viton, Buna N, EPDM, PTFE, Spiral Wound, CAF
End Connections
NPT / BSP Threaded
Flanged Table E / Table F
ANSI B 16.5 Flanged
DIN Standard
Tri Clover Adaptors
SMS /Dairy End Connection
Cyclone dust collectors are the equipment of choice for many applications involving the collection of various sizes of dust particles. In some cases, cyclone dust collectors have been used as a pre-filter before a cartridge or baghouse collector, to out the larger, more abrasive dust particles that can easily damage standard media filters.