Filtek (i) Pvt. Ltd.

Mumbai Pune Hwy, Pune, Maharashtra

The Filtek Centrifugal Oil Cleaner model FT025060200400600 are widely used on land based as well as marine generators since the last 40 years. This is a very effective bypass lube oil filtration to maintain the quality of lube oil for a longer period. The centrifuge is driven by the lube oil pressure of the engine to clean the oil down to 1 micron level. This cleanable unit requires no consumables and is very effective in increasing the oil drain intervals as well as the time between engine overhauls. The inlet to the centrifuge is taken from the lube oil pumplube oil cooler and the oil is drained back to the tank through the tappet coverinspection platecrankcase cover under gravity. A safety Cut-off valve protects the engine from oil starvation at low idle RPM. Negligible pressure drop paves the way for a safe and efficient oil filtration unit. Selection of Filtek Centrifuge model is based on the oil sump capacity of the engine.

The Filtek Centrifugal Oil Cleaner model CK600 is a self contained skid powered by an 80 LPM pump+motor to clean the gear box oils of cement mills and is extremely effective in removing the cement dust contamination, wear metals and ingressed dust particles ranging between 1 micron and 5 microns. The Centrifuge being a cleanable unit has no consumable parts.

The inlet to the centrifuge is taken from the oil tank and the oil is drained back to the tank through the side door fitted with the filtek Centrifuge.

The Filtek Centrifugal Oil Cleaner model CK600 is a self contained skid powered by an 80 LPM pump+motor to clean the coolant of wire and cable drawing machines and is extremely effective in removing the wear metal and dust contamination which is removed when the wire is drawn from blocks of Copper or Aluminum. The wire while being drawn through the die, heats up the die and tool which is cooled by the coolant. As more tiny wear metal particles get into the coolant, the viscosity increases and affects heat transfer adversely. The Centrifuge is capable of removing these tiny particles to maintain the viscosity of the coolant and have effective heat transfer reducing the number of wire breakages, The Centrifuge being a cleanable unit has no consumable parts and replaces the conventional paper band filter.

The inlet to the centrifuge is taken from the oil tank and the oil is drained back to the tank under gravity.

Centrifugal Oil Cleaner model 600s are widely in use on ALCO 251 series Locomotives for Mainline Diesel Engines in India. The fitment is done at the Diesel Loco Works at Varanasi where over 3000 engines have been in operation since the last 14 years. The inlet to the centrifuge is sourced from the lube pump outlet and the drain given through the crankcase door. This cleanable unit requires no consumables and is very effective in increasing the filter drain intervals as well as the time between engine overhauls. A safety Cut-off valve set to 2.5 BAR protects the engine from oil starvation at low idle RPM. Negligible pressure drop paves the way for a safe and efficient oil filtration unit.