Filtcare Technology

Naranpura, Ahmedabad, Gujarat

Filter bags are the most widely used media for filtration. They are made from various Medias like Polypropylene, Polyester, nylon, Nomex and Teflon. Various types of media used are needle felt, mono filament and multifilament. Filter Bags are available in a wide range from 1 200 micron rating.Filtration takes place from inside to outside and these filter bags have a high dirt holding capacity. Removal of filter bag is also quite easy; one can open the top lid of the housing and can change the filter bag and the bag can be disposed off

We manufacture and supply a wide range ofFilter Cage. These are manufactured by high grade of raw material in order to increase the durability of the cage. These are made in galvanized steel, mild steel and stainless steel and are available in different types as flange type, u type, groove type etc. We provide a wide range of configurations to best fulfil your needs.

Cage constructions typically consist of 10, 12 or 20 vertical wires. For areas where moisture or acid corrosion present we can provide a range of materials. Top load cages are available with a T-flange, ring top or several styles of rolled flange tops. Cage diameters range from 4" to 6 1/8".

Wire thickness ranges are; 9 gauge, 10 gauges and 11 gauge. Bottom load cages are constructed with a split collar or split ring top. For more efficient cleaning, Ventura is available for all diameter cages. Ventures are available in 3" to 6" lengths. Filter Bag Cages are the support system for filter bags in a bag house. Its quality in aesthetics, finish and dimensional accuracy plays a vital role in defining the life of the filter bags. Filter Cage at Filtcare Technology, Leading Manufacturer, Supplier, Exporter, Wholesaler, Retailer, Traders ofFilter Cagefrom Ahmedabad, Gujarat, India.

FEATURES AND BENEFITS

• Low Maintenance Cost
• Practical Efficiency Very High
• Possibility of Heat Recovery Very Good.
• Effectiveness Not Affected By Gas-dust Composition.

TECHNICAL SPECIFICATIONS

• Cage MOC:- Carbon Steel/SS 304/SS 316/Galvanized Steel/Epoxy
• Venturi MOC:- Aluminium, Carbon Steel, Galvanized Steel or stainless steel
• Vertical Wire:- 10, 12 & 20 most common; 5, 6, 8, 16 & 24 also available

APPLICATIONS

• Gas Turbine Applications
• Pharmaeucticals
• Food & Beverages
• Fertilizer

Basket Filters are used for a variety of fluids and applications where the suspended particles are to be retained of any size. Basket Filter elements are reusable and cleanable. Basket Filters are of wrap round type and pleated type. Filter Housings consists of filter element supported with positive sealing arrangement to prevent bypassing.

In Basket Filters; unfiltered fluid passes through the element and the suspended solids are retained inside the filter element. Basket filters are normally supplied with spring arrangement at the top of the filter element.

FEATURES

• Highfiltration area
• Low pressure drop
• Reusable and cleanable
• Easy Back washing
• Useful for designing high flow rate systems
• Available in all MOCs like Carbon steel, Mild Steel, SS 304, SS 304L, SS 316, SS 316 L, etc.
• Jacketed systems are also available.
• Duplex Configuration systems are also available wherein one system is in working mode whereas the other is in standby mode in order to allow continuous flow operation.

TECHNICAL SPECIFICATIONS:

• Flow rate: - Up to 2000 M3/Hr

• MOCs: - SS 304, SS 304 L, SS 316, SS 316 L, Carbon Steel, Mild Steel

• Filter Elements: - Wrap Round and Pleated type

• End Connection types: - Flanged, BSP, NPT, DIN standard

APPLICATIONS

• Process Industries
• Power Plants
• Textile
• Refineries
• Chemicals
• Paper and Pulp
• Oil and Gas

High energy cost and demand worldwide have increased the focus on energy efficiency in many industries and market sectors. Specifically, the Power Generation sector is driven by the need for affordable electricity Gas turbine Air Intake Filter Elements are most suited for all latest high performance gas turbines which are often subjected to extreme dusty, stormy and humid conditions. They are manufactured from Impregnated cellulose or synthetic blend filter media in all sizes and shapes for replacement market and also offers economical, high-quality spare cartridges.

Gas Turbine Air Intake Filters are used to improve the energy efficiency.GT Air Intake Filters are normally made up of a mixture of cellulose and polyester and sometimes 100% polyester media. Pleated area offers high filtration area, efficiency and easy clean ability. GT Air Intake Filters at Filtcare Technology, Leading Manufacturer, Supplier, Exporter, Wholesaler, Retailer, Traders of GT Air Intake Filters from Ahmedabad, Gujarat, India.

FEATURES AND BENEFITS

• Washable & cleanable
• Offers high filtration area
• High air to cloth ratio
• Pleated cartridges for pulse-jet systems
• Expanded metal retainers on both sides
• Variety of media choices

TECHNICAL SPECIFICATIONS

• Configuration:- Cylindrical & Conical
• Media:- Mixture of Cellulose & Polyester Media
• Cylindrical Element Sizes: - 325 x 660 mm Long
• Conical Element Sizes:- 445 x 660 mm Long
• End Caps MOC:- Galvanized Steel

APPLICATIONS

• Gas Based Power Plants
• all types of Critical Air Intake applications

Pocket filters are produced from synthetic layered material and are covered with supporting layer of spun bonded media to avoid any type of particles or fiber migration. Pocket filters maintain their good properties even under high pressure and in an extremely dusty environment. Pocket filters are found in air-conditioning and ventilation devices from offices to heavy industry. They are used everywhere where there are high demands on efficiency and dust holding capacity at low pressure loss. They are known for their long lifespan which significantly contributes to the prolongation of intervals between the exchanges of these pocket filters. Pocket Filter at Filtcare Technology, Leading Manufacturer, Supplier, Exporter, Wholesaler, Retailer, Traders of Pocket Filter from Ahmedabad, Gujarat, India.

FEATURES AND BENEFITS

• Reduction of operating cost and maintenance
• Low Pressure Drop
• High Dirt Holding capacity
• Easy to install
• Light Weight

TECHNICAL SPECIFICATIONS

• Length of Pockets:- 360 mm, 600 mm
• No. of Pockets:- 4, 6, 8
• Standard Frame Sizes:- 590 x 590 mm; 610 x 610 mm
• Filtration Rating:- 1, 5, 25 micron
• MOC of frame:- GI
• MOC of Pockets:-Synthetic/Hiloft

Application

• Gas Turbine Applications
• Pharmaeucticals
• Food & Beverages
• Fertilizer

Panel Filters are made up of Galvanised Iron Frame with synthetic/spun bonded media in a pleated form to retain particles upto 1 micron. Basically, these filters work with negative pressure. Filter thread is sealed by sealant into the filter frame made of MDF board (pressed wooden fibres), equipped with a protective layer. On request, the frame can be made of the following materials -zinc-plated steel metal sheet, stainless steel metal sheet or aluminium metal sheet. Hepa Filters are high efficiency filters for filtration rating upto 0.3 micron. Panel Filter, Hepa Filter at Filtcare Technology, Leading Manufacturer, Supplier, Exporter, Wholesaler, Retailer, Traders of Panel / Hepa Filter from Ahmedabad, Gujarat, India.

FEATURES AND BENEFITS

• High Mechanical Stability
• High flexibility in use
• Easy to install
• Low pressure drop

TECHNICAL SPECIFICATIONS

• Sizes:- Standard & Customized
• Type:- Box and Flange type
• Frame MOC:- SS 304 & Aluminium
• Filtration Rating:- 1 to 50 micron
• MOC of filter media:- PP, Polyester, Synthetic Non-Woven, HDPE Mesh, SS Mesh, Nylon Mesh

APPLICATION

• Chemical Industry
• Pharmaceutical Industry
• Food Processing
• Microbiology
• Nuclear Technology

Filterbags are the most widely used media for filtration. They are made from various Medias like Polypropylene, Polyester, nylon, Nomex and Teflon. Various types of media used are needle felt, mono filament and multifilament. Filter Bags are available in a wide range from 1 200 micron rating.Filtration takes place from inside to outside and these filter bags have a high dirt holding capacity. Removal of filter bag is also quite easy; one can open the top lid of the housing and can change the filter bag and the bag can be disposed off.
FEATURES

• Can handle high flow rate
• Has high dirt holding capacity
• Low pressure drop
• Easy cleaning
• Easy maintenance

TECHNICALSPECIFICATIONS
Standard sizes

• 4 x 10 Long
• 4 x 17 Long
• 7 x 17 Long
• 7 x 32 Long

Filtration Rating: - 1, 5, 10, 20, 50, 100 MICRONFilter Media: - Polypropylene, Polyester, Nylon, Nomex, Ryton

TYPESOF FILTER BAGS

• PolypropyleneFilter Bags
• Absolute Filter Bags
• Carbon Bags
• Water Absorbent Bags
• Oil Adsorbing Filter Bags
• Pleated Filter Bags
• Monofilament Mesh Bags

APPLICATIONS

• Viscous fluids like wax, honey, etc
• Paints
• Inks
• Oils
• Cooling water
• Fats
• Food ingredients

Basket Filters are used for a variety of fluids and applications where the suspended particles are to be retained of any size. Basket Filter elements are reusable and cleanable. Basket Filters are of wrap round type and pleated type. Filter Housings consists of filter element supported with positive sealing arrangement to prevent bypassing.In Basket Filters; unfiltered fluid passes through the element and the suspended solids are retained inside the filter element. Basket filters are normally supplied with spring arrangement at the top of the filter element.