Filtcare Technology

Naranpura, Ahmedabad, Gujarat

stainless steel cartridges are used in applications of high temperature and where there is lack of compatibility of synthetic fiber media. Stainless steel cartridges are offered in ss 304, ss 316, ss 316 l, materials . These cartridges are in cylindrical form in pleated form, wrap form and sintered form. Stainless steel cartridges can be washed and reused.
features

• reusable as it can be backwashed
• low pressure drop
• high differential pressure withstanding capacity
• longer lifetime
• high temperature resistance
• no media migration

specifications

• sizes :10, 20, 3040 long
• inner diameter :25mm , 28 mm , 48 mm
• outer diameter :64 mm
• micron rating :0.5 , 1 , 5, 10, 25, 50 , 75 , 100

configuration

• double open type (doe type)
• code 7s (226 o ring design/bayonet)
• code 7f (226 o ring/flat)
• code 3s (222 o ring/bayonet)
• code 3f (222 o ring/flat)

typesof filters

• stainless steel sintered metal type
• stainless steel random fiber / sintered metal fiber type
• stainless steel wire mesh type
• sintered metal powder type

applications

• high temperature application fluids
• gas filtration
• r.o prefiltration application
• oil filtration
• hot-gas filtration

spun bonded cartridge filters are manufactured through a process that thermally bonds pure polypropylene microfibers with lower density at the outside surface and progressively higher density toward the center. The fluid to be filtered passes through the filter matrix and retains the particles inside the matrix which provides high efficiency and longer filters life.spun bonded cartridges can be used either as a pre-filter or final filter for industrial, chemical process, pharmaceutical, food/beverage, cosmetics, water and other applications.
features

• highflow rate with low pressure drop
• high dirt holding capacity
• long service life
• high strength and pressure resistance.
• reduced fiber migration
• broad chemical compatibility
• no chemical additives to contaminate filtrate.

specifications

• sizes :10, 20, 3040 long
• inner diameter :25mm , 28 mm , 48 mm
• outer diameter :64 mm (2.5) , 114mm (4.5) , 6 , 8
• micron rating : 1 , 5, 10, 25, 50 , 75 , 100

configuration

• double open type (doe type)
• code 7s (226 o ring design/bayonet)
• code 7f (226 o ring/flat)
• code 3s (222 o ring/bayonet)
• code 3f (222 o ring/flat)

applications

• drinking water treatment
• food and beverage
• electronic
• industrial water treatment
• chemicals and solvents
• platings

Spun Bonded Cartridge filters are manufactured through a process that thermally bonds pure Polypropylene microfibers with lower density at the outside surface and progressively higher density toward the center. The fluid to be filtered passes through the filter matrix and retains the particles inside the matrix which provides high efficiency and longer filters life.Spun Bonded Cartridges can be used either as a pre-filter or final filter for industrial, chemical process, pharmaceutical, foodbeverage, cosmetics, water and other applications.

Wound Filter Cartridges are made up of polypropylene fibers and are designed to meet the most demanding filtration duties. They are manufactured using a high speed, continuous wind process which creates a superior one-piece filter with hundreds of diamond-shaped tunnels that create depth filtrationfrom the outer to the inner core.These cartridges are appreciated due to its high dirt holding capacity and its construction which allows facing various applications. Fluid flows from outside to inside through filter media and the particulates are held securely in the filter matrix.
FEATURES

• Available in all micron rating from 1 to 100 micron.
• High dirt holding capacity
• Can handle wide range of fluids
• Excellent flow and low pressure drop
• Good fitment as it fits all the standard Housings.

SPECIFICATIONS

• Material: - Polypropylene
• Core: - Polypropylene, Stainless Steel
• Micron Rating: - 1, 5, 10, 20, 25, 50, 100 micron
• Outside Diameter: - 65 mm
• Inside Diameter: - 28 mm
• Length: - 10, 20, 30, 40 Long
• Maximum Operating Temperature: - 110 Deg C

Configurations:-

• Double Open Type (DOE Type)
• Code 7S (226 O Ring Design/Bayonet)
• Code 7F (226 O Ring/Flat)
• Code 3S (222 O Ring/Bayonet)
• Code 3F (222 O Ring/Flat)

APPLICATIONS

• Pre filter for ultra pure water
• Filter for mineral water, wines and fruit juice, etc
• Filtration for Acids
• Portable liquids
• Animal and vegetable oils
• Paints and Coatings

Polytetrafluoroethylene (PTFE) is a versatile polymer used in a broad range of medical, industrial, and high technology applications. PTFE Filter cartridges are used for filtration applications of liquid, air and Gas streams. They are considered bio safe for pharmaceutical products. PTFE Filter Cartridges has an advantage of high filtration area which offers low pressure drop and long service life. These can be steam sterilized directly or reverse as per standard operating data.
FEATURESAND BENEFITS

• Chemically Inert
• High Filtration Area
• Low Pressure Drop

• Sizes :10, 20, 3040 Long
• Inner Diameter :25mm , 28 mm , 48 mm
• Outer Diameter :64 mm (2.5) , 114mm (4.5) , 6 , 8
• Micron Rating :0.05 , 0.1 , 0.2, 0.45, 1 micron

Configuration

• Double Open Type (DOE Type)
• Code 7S (226 O Ring Design/Bayonet)
• Code 7F (226 O Ring/Flat)
• Code 3S (222 O Ring/Bayonet)
• Code 3F (222 O Ring/Flat)

Construction

APPLICATIONS

• Sterilization
• Vent Filter
• Acid Applications
• Gas Purification

Oil adsorbing filter cartridges are designed for removal of dispersed oil from water. These cartridges are used in various process industries and water treatment systems. The oil adsorbing filter cartridge is made up of cellulose. This media will absorb the oil particles from water. Its oil-absorbent filter medium holds up to 20 times its weight in oil. These filters also provide pre-treatment to protect expensive membrane and trace-contaminant adsorbentsystems.
FEATURES AND BENEFITS

• Provides higher flow rate
• Efficient removal of oils from water
• Low pressure drop
• Easy in handling and operation
• Gets Fixed into existing cartridge units

CONSTRUCTIONOil Absorbing Filter Cartridge is made from modified cellulose-based filter media to chemically bond with hydrocarbons and other pollutants.
TECHNICALSPECIFICATIONS

• StandardSizes: - 10, 20, 30, 40 Long
• Filtration Rating: - 5, 10, 20 micron
• Outside Diameter: - 63 mm
• Inside Diameter: - 28 mm
• Configuration: - Double Open End (DOE) type

APPLICATIONS

• Water Treatment
• Ballage and bilge water clean up
• Surge clean up
• Gas and oil cleaning
• Industrial Processes

RBCM cartridgesare made up of cellulose fibers which forms an extremely rigid structure. This construction allows the filter to withstand extremes of viscosity and temperature without collapse or rupture.
FEATURESAND BENEFITS

• Rigid Structure prevents unloading at high temperature.
• Wide range of micron availability from 1 100 micron.
• Wide range of chemical compatibility
• Long Service Life

TECHNICALSPECIFICATIONS

• AvailableSizes: - 10, 20, 30, 40 Long
• Outside Diameter: - 63 mm
• Inside Diameter: - 28 mm
• Filtration Rating: - 1, 5, 10, 25 micron

APPLICATIONS

• Fuel Oil
• Grease
• Paints
• Inks
• Alcohol
• Membrane Protection
• Resin Trap

Carbon black cartridges are used for the filtration of water, spirits and organic solvents. These are used for removal of color, smell and taste contamination through anodic oxidation and cathodic reductions.Its nominal filtration rating makes it excellent for pre filtration in applications which require very fine filtration.
FEATURES

• High dirt holding capacity
• Prevent carbon particle to pass into the filtrate
• Good Oil adsorption medium

TECHNICAL SPECIFICATIONS

• Size: - 10, 20, 30, 40 Long
• Filtration Rating: - 5, 10 Micron
• Outside Diameter: - 63 mm
• Inside Diameter: - 28 mm

APPLICATIONS

• Water Treatment
• Membrane Pre filter
• Edible Oil
• Mineral Oil