Our Product / Services
Measuring Instruments & Equipment
2 Products availableLaboratory Equipments
1 Products availableElectrical & Electronic Testing Devices
1 Products availableClamps
1 Products availableInstrument Calibration & Testing
1 Services availableChemical Machinery & Plant
1 Products availableOur Complete range of products are hardness testing machines, erichsen testing machines, Electronic Four Column Compression Testing Machines, ELECTRONIC TORSION TESTING MACHINES and Electronic Compression Testing Machines.
| Principal : | ||||||||||||||||||||
| Rockwell, Rockwell superficial & Rockwell cum Brinell tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.RASNE series machines are suitable for Rockwell, Rockwell superficial & Rockwell cum Brinell tests. These are motorized digital Hardness testers having LCD display for easy hardness measurement. The results are displayed in 0.1 Rockwell unit for more accurate measurement. | ||||||||||||||||||||
| Operation : | ||||||||||||||||||||
| Various parameters of test can be set on front panel by operation of key board and observing LCD display Viz high/low limits, dwell time, auto/manual start, printer selection, scale selection etc. All set data can be verified edited by pressing SCL key one after another.Machine operation is very simple. The normal mode is a bar followed by "SET" indication. Raise elevating screw slowly through bar indication till "SET" position which will show "PRESS START" indication. Now press "START" button. Loading/unloading cycle will be completed and hardness is shown on LCD display with High/Good/Low indication. Lower down elevating screw. Panel will show normal mode for next test. Also when required 'AUTO START' on front panel by operation of key board & observing LCD Display then raise elevating screw slowly through bar indication till "SET" position then it will starts loading/unloading cycle automatically & hardness is shown on LCD Display with High/Good/Low indication.
| ||||||||||||||||||||
| Model | RASNE-1 | RASNET-1 | RASNEB-1 |
| Testing Table 50mm dia. | 1 | 1 | 1 |
| Testing Table 38mm dia. with 'V' groove for round jobs 6-45 mm dia. | 1 | 1 | 1 |
| Diamond indentor - Rockwell RA | 1 | - | 1 |
| Diamond indentor - Rockwell SF | - | 1 | - |
| Steel Ball Indentor 1/16" with 5 spare balls | 1 | 1 | 1 |
| Steel Ball Indentor 2.5 mm with 5 spare balls | - | - | 1 |
| Test Block Rockwell "C" | 1 | 1 | 1 |
| Test Block Rockwell "B" | 1 | 1 | 1 |
| Test Block HB 2.5 / 187.5 | - | - | 1 |
| Test Block HR 30 N | - | 1 | - |
| Allen Spanners | 5 | 5 | 5 |
| Screw Driver | 1 | 1 | 1 |
| Clamping Device | 1 | 1 | 1 |
| Wooden Box for Std. Accessories | 1 | 1 | 1 |
| Telescopic Sleeves for Elevating screw position | 1 Set | 1 Set | 1 Set |
| Spare Fuse 1 Amp. | 1 | 1 | 1 |
| Power Cable | 1 | 1 | 1 |
| Brinell Microscope | - | - | 1 |
| Machine Cover | 1 | 1 | 1 |
| Instruction Manual | 1 | 1 | 1 |
| ||
| ||
| Installation :It is recommended that the machine is mounted on a rigid table. |
| FIE reserves rights of change in the above specification due to constant improvement design.The dimensions given above are all approximate. |
|
||||||||||||||||||
| Electronic Four Column Compression Testing Machines ( Model : CTE 200 and 300 4C ) |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| FIE reserves the rights of change in the above specifications due constant improvement in design. The dimensions given above are all approximate.*PC and Printer is not in our standard scope of supply. |
| Features : |
| Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by torque transducer system.Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque ang angle of twist.The accuracy of torque indication is 1% of the true torque. |
| The electronic control panel is built using 8085 microprocessor which incorporates state of the art technology with following features - |
| Front Panel membrane type kay board for test setup.7segment digital display of load displacement/extension.Printer port interface.Serial port communication with PC.Storage of important parameters such as peak load & maximum dispalcement after test.Preload selection to take care of initial slippage.Optioanl real time graph & PC software. |
| Technical Data : | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| The FIE Compression Testing Machine incorporates design features to enable high accuracy testing with economy, speed and versatility. | ||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||
| Specification : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| FIE introduces its new model of Universal Testing Machine with design flexibility, a modern appearance and high performance electronics. Some of the features include - | |||||
| |||||
| Electro-Mechanical Universal Testing Machines UNITEK 9400 Series with PC Interface & Real Time Graph ( Panel / PC Controlled ) |
| Technical Description : |
| 'FIE' Universal Testing Machine series Unitek 9400 are microprocessor based electromechanical machines with Servo drive designed for testing & studying mechanical behavior of various materials like metals, polymers, elastomers etc. These machines offer good built-in features to offer excellent stand alone performance for standard tests & great flexibility for complex analysis. These machines confirm to IS, BS & ASTM standards. |
| Main Features : |
| Precision DC servo motor & Drive with ball lead screw gives an advanced drive system with1 to 1000 standard speed range.Provision for load cell inchargeability & thereby automatic selection of load full scale & units (kN or N).Speed selection through Data entry or variable speed through potentiometer.Facility for mounting different load cells & clamping devices to suit different tests & materials such as thin wires, metalsheets, fiberglass, leathers, springs, cardboards etc.Built-in parallel interface to connect Dot matrix printer for data & curve print-out.Safety interlock for overload & limit switch sensing to ensure protection during test.Universal applications in R & D, education, quality control & production for test like tensile, compression, bending etc. |
| Electronic Control Panel (Series Universal 2001) : |
| Microprocessor based panel incorporating state of art technology with following features.Front panel membrane type keyboard for machine operation with numeric keys for data entry.7 segment display.Auto load cell identification.Data entry with numeric keyboard of test parameters including speeds, rupture % peak, preload, modulus data, test data, specimen data etc.20 input data set storage, 50 result storage, maintains data & results during power off.Batch test facility for generating batch & statistics result. Using same data set.Optional remote to ease specimen loading/unloading.RS232C serial port. Optional windows based software available for.On line graph on PC. Data analysis, statistics point tracing superimposing graphs to compare with standard, zooming graph etc. |
| Printer port for printer interface with : |
| Graph & result printout.Test certificate printout.Batch certificate printout.Simple statistics printout. |
| Optional accessories : |
| FIE offers wide range of optional accessories along with Unitek 9400 machines to cover almost every material test requirement. |
| Loaded Cells : |
| FIE offers Strain gauge type Universal load cells in different capacities in the following nominal ranges :100N, 250N, 500N, 1kN, 2.5kN, 5kN, 10kN, 25kN, 50kN, 100kN Load cells of different capacity can be offered as per customers requirements. |
| Grip & Clamping Devices : |
| A wide range of grips are available from FIE such as, |
| Wedge type grips for flat & round specmens with different inserts.Vise type grips.Single threaded grips.Pneumatic grips.Compression plates.Bending fixtures.Shearing attachments. |
| Extensometers: |
| Electronic analog extensometers are offered along with interface card on the control panel to measure extension.Model 1 : EE2 - STRAIN GAUGE (with 1 micron resolution).Model2 : LTE800-DIGITALTYPE(with 10 micron resolution). |
| Serial Communication & Software Package on PC: |
| The Universal 2001 series control panel can be hooked to any PC using RS-232 communication port. FIE offers different window based software packages with real time graph on PC to enable the user to effectively evaluate different parameters. |
| The features include : |
| Real time graph, User friendly software.Extensive graphics on screen for curve plotting, magnification and zooming.Software features includes Graph comparison, point tracing facility. Different units selectionfor load & displacement.Statistical evaluation with water fall dig., Mean deviation, frequency distribution, Skew dig., Histogram. Also calculates max. value, min. value, mean value, Variance, Standard Deviation.( Other statistical parameters on request ). Selectable batch & statistical printouts.Evaluation of wide range of user selectable parameters such as % elongation, % reduction inarea, young's modulus, yield stress, proof stress etc.Software packages for Shear, Bend, Torsion, Rubber, Textile Testing etc.Customer built application software to suit customer requirements. |
| Specification : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loading accuracy as high as+1%.
Straining at variable speeds to suit a wide range of materials.
Printer & PC graphs enable study the behavior of the materials.
Motor driven threaded columns for quick effortless adjustment of middle crosshead to facilitate rapid fixing
of test specimen.
Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials
Simplicity in reading because of digital readouts.
Wide range of standard and special accessories, including load stabilizer.
Easy change from plain to threaded and screwed specimens.
Large effective clearance between columns enables testing of standard specimens as well as structures.
Simple controls for easy of operation.
Robust straining frame of an extremely rigid construction.
Safe operation ensured be means of safety devices.
Fully enclosed and protected pressure transducer.
RS 232 serial port to transfer data to computer for analysis/storage evaluation etc.
Manual control & release valve operation.
| Application : | |
| FIE Electronic Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also conducted. | 0 |
| Principal of Operation : | |
| Operation of the machine is by hydraulic transmission of load from the test specimen through pressure transducer to a separately house load indicator. The system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. | |
| Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the pressure transducer housed in the control panel. The transducer gives the signal to the electronic display unit corresponding to the load exerted by the main ram.Simultaneously the digital electronic fitted on the straining unit gives the mechanical displacement to the electronic display unit. Both the signals are processed by the microprocessor and load and displacement is displayed on the digital readouts simultaneously. | |
| |
| The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to BS : 131 : Part 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993 & ASTM : E-23-94a. | |
| The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale. | |
| (It is read on digital readout in case of electronic machines.)There are two strikers and one combined support available for fitting in to the pendulum and on to the base of the machine for the Izod, Charpy test respectively, Changing from one striker to another is achieved simply by fixing the new striker into it's position. The charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports. |
| Loading accuracy as high as+1%.Straining at variable speeds to suit a wide range of materials.Printer & PC graphs enable study the behavior of the materials.Motor driven threaded columns for quick effortless adjustment of middle crosshead to facilitate rapid fixingof test specimen.Continuous roll autographic recorder supplied as standard to enable study of the behavior of materialsSimplicity in reading because of digital readouts.Wide range of standard and special accessories, including load stabilizer.Easy change from plain to threaded and screwed specimens.Large effective clearance between columns enables testing of standard specimens as well as structures.Simple controls for easy of operation.Robust straining frame of an extremely rigid construction.Safe operation ensured be means of safety devices.Fully enclosed and protected pressure transducer.RS 232 serial port to transfer data to computer for analysis/storage evaluation etc.Manual control & release valve operation. | ||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| Specification : | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| The FIE Spring Testing Machine, Models St and CST, incorporates design features to enable high accuracy testing with economy, speed and versatility |
| Loading Accuracy as high as+1%Four standard measuring ranges available with auto load-selector.Deflection is read directly on electronic Electronic Digital Display.Straining at variable speeds to suit a wide range of applications.Autographic recorder supplied as standard to enable study of behavior of springsMotorised drive for rapid adjustment of the heightHigh reading accuracy due to large size of dial.Large effective test space enables testing of wide range of springs.Robust staining frame of an extremely rigid construction.Safe operation ensured be means of safety devices.Fully enclosed and protected pendulum. |
| |
| Application : |
| FIE Laminated Spring Testing Machine is designed to test Laminated Springs and Coil Springs under compression and bending loads. |
| Principal of Operation : |
| Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen. Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen. |
| Machine consists of : |
| Straining Unit: |
| This consists of a "C" type rigid frame with hydraulic cylinder at its top and adjustable main testing tale is connected to an upper cross-head through two screwed columns can be rapidly adjusted to test height by means of motor. A pair of trolleys is provided on the table to take the horizontal deflection of the spring under loading. Laminated springs are tested by placing them on trolleys provided on the table. Coil Springs are tested by placing them between the compression plates. Hardness test can also be conducted with a suitable attachment. |
| Control Panel : |
| The control Panel consists of a power pack complete with drive motor and an oil tank, control valve a pendulum dynamometer a load and deflection indicating system and an autographic recorder. |
| Power Pack : |
| The power pack generates the maximum pressure of 200 kgf/cm2the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth. |
| Hydraulic Controls : |
| Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation in the oil is infinitely variable. Incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of table movement. |
| Load and Deflection Indicator System : |
| The load Indicator System consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded. The deflection indicator system operates electronically and deflection is read directly on the digital display with least count of 0.1 mm. The encoder is mechanically coupled to the main hydraulic ram for getting signal of deflection. |
| Pendulum Dynamometer : |
| This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurised oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with special damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator. |
| Autographic Elongation Recorder : |
| This unit is of the pen and drum type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ratio of either 1:1 or 1:2. |
| Accuracy & Calibration : |
| AII FIE Laminated Spring Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : 1964 FIE Spring Testing Machines comply with Grade "A" of BS : 1610 : 1964 and Grade 1.0 of IS 1828 : 1975 An accuracy of+1.0% is guaranteed from 20% of the load range selected to full load. |
| Helical Coil Spring Testing Machine Model CST : |
| FIE's range also includes Helical Coil Spring Testing Machine, Model CST for testing coil springs under compression loads. the principle of operation, details on control panel, except deflection indicator system, accuracy and calibration are the same as the laminated Spring Testing Machine. Model ST described alongside. The straining unit is designed for coil Springs. It consists of a Hydraulic Cylinder and a table coupled with the ram of the hydraulic cylinder mounted on a robust base. The cylinder and the ram are individually lapped to eliminated friction. The cross-head is connected to two screwed columns and is driven by a motor for rapid adjustment of test height. |
| Model | CST-6 | CST-10 | ST-10 | ST-20 | ST-50 |
| Maximum capacity (Tone) | 6 | 10 | 10 | 10 | 50 |
| 1st Measuring Range (Tone) | 0-6 | 0-10 | 0-10 | 0-20 | 0-50 |
| Minimum Graduations (kgf) | 10 | 20 | 20 | 40 | 100 |
| 2nd Measuring Range (Tone) | 0-3 | 0-5 | 0-5 | 0-10 | 0-25 |
| Minimum Graduations (kgf) | 5 | 10 | 10 | 20 | 50 |
| 3rd Measuring Range (Tone) | 0-18 | 01-2.5 | 01-2.5 | 0-4 | 010 |
| Minimum Graduations (kgf) | 3 | 5 | 5 | 8 | 20 |
| Table size (mm) | - | - | 250 x 2400 | 400 x 2400 | 460 x 2650 |
| Vertical travel of table for Model ST/of Crosshead for Model CST (mm) | 150-1250 | 150-1250 | 0-400 | 0-500 | 0-600 |
| Distance between trolleys adjustable (mm) | - | - | 500 - 2150 | 650 - 2150 | 850-2300 |
| Pair of compression plates adjustable (mm) | 360 | 360 | 250 | 400 | 460 |
| Maximum distance between compression plates (mm) | 1250 | 1250 | 400 | 650 | 750 |
| Range for measurement of deflection range (mm) | 0-250 | 0-250 | 0-300 | 0-250 | 0-300 |
| Minimum graduation of deflection range | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| Ram stroke (mm) | 200 | 200 | 300 | 250 | 300 |
| Straining/piston speeds (mm/min) (at no load) | 0-200 | 0-125 | 0-250 | 0-200 | 0-100 |
| Clearance between columns (mm) | 500 | 500 | - | - | - |
| Connected Load | - | - | - | - | - |
| HP | 1.33 | 1.33 | 2 | 2 | 3 |
| V | 440 | 440 | 440 | 440 | 440 |
| Ø | 3 | 3 | 3 | 3 | 3 |
| Principal : | |
| Rockwell & Rockwell Superficial tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.Brinell test consists of forcing a hardened ball into surface of a test piece with a specified test-force and measuring the diameter of indentation for evaluation of Brinell hardness number. | |
| Operation : | |
| For Rockwell & Rockwell Superficial Test : | |
| In case of 'RASN' series machines for Rockwell & Rockwell superficial tests a preliminary test force in first applied and then indicator is automatically set for zero. Quickly thereafter an additional test force is applied without removing the preliminary test force. When the penetration is stabilised, the additional test force is removed and the hardness number is shown directly on the indicator. | |
| For Brinell Test : | |
| The operation is exactly same as above. However, the diameter of impression is measured outside of machine by Brinell microscope. Brinell hardness number is found out by referring corresponding hardness tables showing hardness number against dia. of indentation for specified ball diameter and test force. Suitable for Rockwell Tests. Manually Operated. Preliminary Test Force - 98.07 N (10kgf). Additional Test Force - 490.3, 882.6, 1373N (50.90, 140 kgf). Total Test Force - 588.4, 980.7, 1471N (60, 100, 150 kgf). Test Force Selection by external dialing. Auto zero setting dial gauge. Rockwell cum Brinell Tester, Model RASN (B) Same as RASN above in additional Additional Test Force - 1471, 2354N (177.5, 240kgf) Total Test Force - 1839, 2452N (187.5, 250kgf) |
| Features : | ||||||||||||||||||
| Rockwell, Rockwell Brinell Combined, Rockwell/Rockwell Superficial Combined System Hardness Testers. | ||||||||||||||||||
| SAROJ Hardness Testers, Model RAS, RAB-1, RAB-250, TWIN are manually operated. All these models are suitable for testing hardness of metals sand alloys of all kinds hard or soft, whether flat, round, or irregular shape. These testers are simple in design and easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for schools, laboratories, tool-rooms, inspection, heat treatment departments, factories etc.These testers strictly confirms to IS : 1586-2000, ASTM : E 18 for Rockwell Superficial Test and IS : 2281 -2005, ASTM : E 10 for Brinell test.
|
| Model | RAS /RASM | RAB-1 / RAB-250 | TWIN |
| Testing table 50mm dia | 1 pc. | 1 pc. | 1 pc. |
| Testing Table 38mm dia with 'V groove for round jobs 6 to 45mm dia. | 1 pc. | 1 pc. | 1 pc. |
| Diamond Indentor 120° | 1 pc. | 1 pc. | 1pc. |
| Stell ball Indentor 1/16" | 1 pc. | 1 pc. | 1 pc. |
| Test Block Rockwell 'C | 1 pc. | 1 pc. | 1 pc. |
| Test Block Rockwell 'B' | 1 pc. | 1 pc. | 1 pc. |
| Test Block Rockwell Superficial 'N' | Nil | Nil | 1 pc. |
| Allen Spanners | 5 pcs | 5 pcs | 5 pcs |
| Clamping Device | 1 pc. | 1 pc. | 1 pc. |
| Dash Pot Oil | 1 Bottle | 1 Bottle | 1 Bottle |
| Rubber bellow for elevating screw protection | 1 pc. | 1 pc. | 1pc. |
| Instruction Manual | 1 Book | 1 Book | 1 Book |
| Brinell Microscope | Nil | 1 pc. | Nil |
| Stell Ball Indentor 2.5mm | Nil | 1 pc. | Nil |
| Test Block HB 2.5/187.5 | Nil | 1 pc. | Nil |
| Stell Ball Indentor 5mm | Nil | 1 'pc. -. | Nil |
| Technical Data : | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Features : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rockwell, Rockwell Brinell Combined, Rockwell/Rockwell Superficial Combined System Hardness Testers. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
SAROJ Hardness Testers, Model RAS, RAB-1, RAB-250, TWIN are manually operated. All these models are suitable for testing hardness of metals sand alloys of all kinds hard or soft, whether flat, round, or irregular shape. These testers are simple in design and easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for schools, laboratories, tool-rooms, inspection, heat treatment departments, factories etc. These testers strictly confirms to IS : 1586-2000, ASTM : E 18 for Rockwell Superficial Test and IS : 2281 -2005, ASTM : E 10 for Brinell test. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Standard Accessories : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Technical Data : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Loads & Indentors for 'Saroj' Hardness Testers for Rockwell & Brinell Tests. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Electro Mechanical Universal Testing Machines UNITEK 9700 Series with Interface & Real Time Graph ( Panel / PC Controlled ) |
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| Model No. | UNITEK 9701 | UNITEK 97025 | Units | |
| Load range | 0-1 | 0-2.5 | kN | |
| Load resolution |
1 st range : 0 - 40% of F.S. |
1 / 20000 of nominal load cell connected. | 1 / 20000 of nominal load cell connected. | - |
|
2 st range : 0 - 100% of F.S. |
1 / 10000 of nominal load cell connected. | 1 / 10000 of nominal load cell connected. | - | |
|
3rd Range : 40 - 100% of F.S. |
1 / 4000 of nominal load cell connected. | 1 / 4000 of nominal load cell connected. | ||
| Load measuring accuracy | ±1% from 2% to 100% of nominal load of loadcell used. | ±1% from 2% to 100% of nominal load of loadcell used. | - | |
| Max. Crosshead Stoke | 800 ( Without grips & load cell ) | 800 ( Without grips & load cell ) | mm | |
| Crosshead Displacement measurement | 0.01 | 0.01 | mm | |
| Crosshead speed range | 0.5-500 | 0.5-500 | mm/min | |
| power upply | 230 VAC, 50 Hz Single Phase | 230 VAC, 50 Hz Single Phase | - | |
| • Optional : EE2 Extensometer, Software Package | ||||
| B-3000 (H) | B-3000 (O) |
| Machine designed with a hydraulic power pack and control circuit effortless, unloading operation.A dial guage in front measure depth of ball penetration. This facilities productiontesting within tolerance limits by compression method. | Basic machine design & operation similar to B-3000 (H). In addition 'optical device' with 14 x magnification provided in front to project dia. of ball impression on glass screen with a micrometer measuring system with 0.01mm accuracy. The indentor swivels & projects dia of ball impression immediately after unloading operation which avoids additional time for measurement of ball impression. |
| Saroj Hardness Testers, Model B-3000 (H) & Model B-3000 (O) are precision engineered confirming to IS:2281:1968, BS:240 and ASTM:E 10, however B-3000 (H) & Model 3000 (O) are most suitable for production testing. These machines are designed to measure hardness of castings, forgings, other metals and alloys of all kinds, hard or soft, whether flat, round or irregular in shape. | |
Due to constant improvement of the product,
Saroj reserves all rights to change the above specifications without any prior notice.
|
| Model | B-3000 (H) | B-3000 (O) |
| Testing table 200mm dia. | 1pc. | 1pc. |
|
Testing table 70mm dia. with 'V' groove for round jobs - 10 to 80mm dia. |
1pc. | 1pc. |
| Ball Holder 5mm | 1pc. | 1pc. |
| Ball Holder 10mm | 1pc. | 1pc. |
| Test Block HB-5/750 | 1pc. | 1pc. |
| Test Block HB-10/3000 | 1pc. | 1pc. |
| Brinel Microscope | 1pc. | Nil |
| Allen Spanner | 7 pcs. | 4 pcs. |
|
Telescopic Cover for elevating screw protection |
1 Set | 1 Set |
| Instruction Manual | 1 Book | 1 Book |
FIE - FUEL INSTRUMENTS & ENGINEERS PVT. LTD. ( (FIE - FUEL INSTRUMENTS & ENGINEERS PVT. LTD. ()
Plot No. 68 to 89, Parvati Co-op. Industrial Estate Ltd.,
Yadrav ( Ichalkaranji ) - 416 145, Tal. Shirol, Dist. Kolhapur,
Maharashtra. - 416145
Share us via
Write a Review
