Ferric Kitchens

Rajender Nagar, Dehradun, Uttarakhand

We are instrumental in manufacturing and supplying the high quality Double Deep Fryer, which is widely installed in kitchens for cooking purpose. The Double Deep Fryer, provided by us, is insulated with oil tank provided with 2 no. SS fryer pans complete with frying basket, tilt type heating elements, removable oil pans, oil drain out socket and control panel. This Double Deep Fryer is high on demand due to its precise construction, exceptional features, and cost effectiveness. Construction :

• Top constructed of 16 SWG SS sheet
• Front and both sides turned down, rear turned up to 6
• Side and rear cladding in 18 SWG SS sheet
• Top shall be secured on 38 mm SS pipe welded with ms frame work
• Legs with adjustable bullet feets
• It can be with or without stand
• Provided with SS wire meshed fryer baskets with heat resistant handle with basket rest hook with underneath oil collection drip tank in SS which is removable

The clients can avail an exclusive range of Charcoal Grill from us. Our Charcoal Grill is designed and developed using the MS frame work welded to MS sheet of 12 SWG from inside, outer cladding of SS sheet of 18 SWG with thick insulation in between the sheets. Further, this Charcoal Grill is provided with SS wire mesh, which helps in providing the heat to the grilling sticks. The bottom of Charcoal Grill is provided with dip tray with integral handle to collect the ash. Coal and wood are used as fuel in our Charcoal Grill. Highlights :

• Robust construction
• Effective performance
• Advanced features
• Cost effective

The company is engaged in manufacturing and supplying the high quality Under Counter Refrigerator. The Under Counter Refrigerator, provided by us, is assembled using the finest quality components, which enhance the performance and service life. With the use of advance technology, we construct highly efficient Under Counter Refrigerator that is used for cold storage of products. Moreover, this type of Under Counter Refrigerator is widely installed in hotels, bars, & restaurants to keep the things in reach of bartenders and chefs. Construction :

• Top of 16 SWG SS sheet welded on MS frame work
• Internal and external cladding in 20 SWG SS sheet with 2 thick puff insulation
• Front of unit provided with 3 no.18 SWG SS puff insulated doors with integral handle
• Magnetic gasket on doors
• Internal temperature to be maintained between -2 to+2
• Provided with removable and adjustable SS welded wire shelves on SS steel clips
• Side channel supported with adjustable height
• Independent controls, single phase, digital display with electrical chord
• Legs in SS pipe diameter 38 mm with adjustable bullet feets
• Bottom of internal tank shall be provided with drain outlet.
• Below it SS dip tray of 18 SWG SS sheet with integral handle
• Right hand side with 1hp compressor of copelandkirloskar make

We are highly recognized in this industry for manufacturing and supplying the rigidly constructed Bakery Deck Oven. The Bakery Deck Oven, we provide, is designed in various options of sizes and capacities. We design this Bakery Deck Oven as per the industry standards to ensure high performance with optimum results. The Bakery Deck Oven consists of separate controls for each deck that comes with separate options for heating-top, bottom and front. Moreover, Bakery Deck Oven also includes an option of independent timer per deck, heavy insulation between glass wool and decks that make the working smooth enough. Besides, the clients can avail this Bakery Deck Oven in customized form from us. Construction :

• Exterior of oven is with stainless steel
• Inside chambers of MS iron
• Built in steam generator
• Independent steam for each chamber
• Auto on and off switch,
• Internal lighting front doors of heavy steel with glass in between to see the item
• Wool insulation should be heavy around the chamber to make it economical on power
• Provided with elements (thermostat)

Note : It Can Be Single Deck, Two Deck or Three Deck Accordiing to the Requirement of Customer.

We hold specialization in manufacturing and supplying the high quality Two Gas Burners. Our Two Gas Burners are assembled as per the industry standards to fulfill the varied needs of clients. Owing to accurate dimension, precise fabrication, and compact design, these Two Gas Burners get widely demanded for performing kitchen appliances. Further, the valuable clients can avail these Two Gas Burners in customized form from us. Construction :

• Top of 16 SWG
• Needle valve-4 no.
• Copper pipe
• Pilot - 2 no.
• Heavy duty pan support/grates of cast iron - 2 no.
• M.S frame work
• SS pipe 1.5" legs with adjustable bottom shelf 18 SWG SS sheet
• hp burner - 2 set

When it comes to Shawarma Grill Machine, the name of Ferric Kitchens is known as a dependable Manufacturer and Supplier in market. We offer high in performance Shawarma Grill Machine. Our Shawarma Grill Machines are fabricated using optimum grade SS Metal. These Shawarma Grill Machines are widely preferred by shop owners, hotels, restaurants etc. Our Shawarma Grill Machine provides easy and quick grilling option to the users. The valuable customers can avail these Shawarma Grill Machines at the market leading prices from us.

Ferric Kitchens is counted amongst the leading Manufacturers and Suppliers of Refrigerated Display Counter. We are instrumental in offering high quality Refrigerated Display Counter. We use only fine grade SS Metal to fabricate these Refrigerated Display Counter. Our Refrigerated Display Counters are equipped with hi-tech refrigeration equipment for effective cooling. These Refrigerated Display Counters look quite elegant when food items are displayed in them. We are offering premium quality Refrigerated Display Counters at very reasonable price.

We are the reliable Manufacturer and Supplier of Four Door Refrigerator that is fabricated as per the specifications mentioned from the clients side. The Four Door Refrigerator, we offer, is precisely constructed with the use of advanced technology. Our Four Door Refrigerator is high on demand due to its accurate dimension, rigid construction, exceptional features, and cost effectiveness. Attributes :

• Robust construction
• Precise dimension
• Customization facility
• Excellent finishing
• Compact design

The company is engaged in manufacturing and supplying the high quality Stainless Steel Rack. Our Stainless Steel Rack is made using the finest quality Steel that is sourced from the reliable vendors of the industry. We offer this Stainless Steel Rack with shelves that helps in keeping the utensils in an organized manner. Due to excellent finishing, precise fabrication, and high strength, this Stainless Steel Rack is widely demanded in the domestic market. Construction :

• Stainless steel rack with unit to have 5 shelves
• Shelves constructed of 18 SWG SS sheet mounted on 4 no.SS square pipe legs of 38mm fitted with adjustable bullet feet
• Rear and two sides to be raised by 2
• If required shelves to be provided with SS angle support from below

We are the prominent Manufacturer and Supplier of premium quality Dosa Plate. Our Dosa Plate is fabricated using the finest quality material that enhances the performance and service life. Our team of technicians precisely constructs this Dosa Plate as per the varied needs of clients. Moreover, our quality checkers stringently check this Dosa Plate on various parameters to ensure zero manufacturing defects and excellent performance. Construction :

• Top of 12 mm thick MS plate
• Welded to MS frame work
• 150mm back splash
• Mounted on 4 no. SS pipe legs 38mm with adjustable bullet feet
• Bottom shelf of 18 SWG SS sheet
• Exterior cladding around top of 18 SWG SS sheet
• Front of plate to have gutter along the width of plate, with SS grease drawer
• Below plate is the v-type hp burner fitted horizontally along with pilot burner
• Under sides of burner to have slide out dip tray of 20 SWG SS sheet with integral handle

We are the reliable Manufacturer and Supplier of Bain Marie Counter that is equipped with over head pick up counter and complete water inlet outlet. Our team of engineers assembles this Bain Marie Counter precisely by using the premium quality components. Due to accurate dimension, high strength, and longer life, this Bain Marie Counter is widely used in Kitchens for storing different ingredients at one place. Construction :

• Top and body secured to MS frame work
• SS sheet welded with frame work
• Top of 16 SWG SS sheet
• Bottom shelf of SS sheet of 18 SWG
• Three side covered with SS sheet 20 SWG
• Mounted on four no. SS legs of 38 mm diameter with adjustable bullet feet
• 4 KW heating element with GN pans with lids
• Double tank with glass wool insulation
• Electric panel complete with thermostat, on-off switch and light indicator
• Full width 25 mm diameter SS pipe tray rest rail with SS bracket
• low water automatic shut- off valve

The esteemed clients can avail an exclusive range of Three Gas Burners from us. Our Three Gas Burners are compactly designed as per the specifications mentioned from the clients side. Due to accurate dimension, minimal energy consumption, and fast working these, Three Gas Burners get highly praised amongst clients. Moreover, we offer these Three Gas Burners at the most competitive prices to clients. Size : 72X24X34 Construction :

• Top constructed of 16 SWG stainless steel sheet
• Front and both sides turned down 2 & in rear turned up 6, returned 1 & down
• Top shall be secured on MS welded angle frame work of 1.25x1.25
• Unit shall be mounted on four numbers stainless steel square pipe of diameter 1.5 legs with adjustable bullet feet
• Unit will have a bottom shelf of 18 SWG SS sheet or unit leg shall be braced with 1 diameter SS pipe to form a bottom shelf with diameter SS pipes welded width wise, interspaced at 3
• Unit to receive three no. cast iron pan supports of size 14x14, with three no.s high pressure burner along with pilot burner
• Under sides of burner shall be provided with three no.s 20 SWG SS slide out drip tray with integral handle to be provided

We are highly renowned in this industry for manufacturing and supplying the premium quality Three Sink Unit. Our Three Sink Unit is made using the state-of-the-art technology to ensure effective performance. We provide this Three Sink Unit in various sizes and dimensions to cater the needs of clients from different cooking premises. Moreover, we offer this Three Sink Unit in customized form to our clients. Construction :

• Unit secured on MS frame work
• Top of 16 SWG SS sheet
• Rear of unit to have 6 back splash
• 4 no.SS square pipe of 38mm as legs fitted with adjustable bullet feet
• Unit will have a bottom shelf of 18 SWG SS sheet or legs cross braced at bottom with 1 SS pipe
• Top of unit to be provided with 3 no. sinks of size 20x20x12 deep
• Each sink to have waste outlet of 1.5 diameter fitted with flexible PVC drain out valve
• Taps to be installed on wall
• Sound deadening finish of carbiozite aluminium finish

Ferric Kitchens has carved a niche for itself in the domestic market as a Manufacturer and Supplier of Hot Case. We are engaged in the manufacturing of Hot Case with gn Pans and Glass. Our Hot Case is acclaimed for its robust construction and flawless performance. It is equipped with advanced technology and high quality materials. The valuable customers can avail these Hot Cases at the market leading prices from us.

When it comes to Stainless Steel Railing With Glass, the name of Ferric Kitchens is known as a reliable Manufacturer and Supplier in market. We offer high grade Stainless Steel Railing with etching on toughened glass. The railings are high in performance and mainly demanded for their exquisiteness. We use only fine grade SS metal to fabricate these stainless steel railings. These Stainless Steel Railings With Glass are widely demanded in homes, hotels, restaurants, offices etc. Last but not the least, we have been offering our Stainless Steel Railing With Glass at competitive market rates.

We are the reliable Supplier and Manufacturer of Tilting Pan that is assembled in adherence with industry standards. The Tilting Pan, we offer, to clients is installed with dual power setting, normal and high cooking power controls, power burner gas combustion system, automatic ignition, spring assist cover with vent. Moreover, due to its diverse qualitative features such as easy to use, manual hand tilt, adjustable feet with rear flanged, and others, this gets widely used in kitchens of hotels, bars, and so on. Specifications :

• Pan in SS 304 of 12 gauge
• Electronic thermostat for temperature

Ferric Kitchens is one of the specialized Manufacturers and Suppliers of Two Door Refrigerator. It is widely popular bakery refrigeration equipment acclaimed for its high performance and matchless quality. We manufacture Two Door Refrigerator with the finest materials and components. These refrigerators provide effective cooling and provide reliable refrigeration solution.

We are highly recognized in this industry for manufacturing Single Sink Unit. Our Single Sink Unit is manufactured in adherence with set industry standards to meet the varied needs of clients. We provide this Single Sink Unit in various sizes, shapes, and dimensions. Due to precise construction, compact design, smooth finish, and no leakage, this Single Sink Unit is highly demanded in the domestic market. Construction :

• Top of 16 SWG SS sheet
• MS frame work
• Bowl Size : 18"x18"x10"
• Mounted on 4 no.SS pipe legs of diameter 1.5"with adjustable bottom shelf of 18 SWG SS sheet
• Back splash raised 6"fitted with drain waste valve with flexible PVC pipe

Ferric Kitchens is counted amongst the pioneering Manufacturers and Suppliers of Pani Puri Counter. We are instrumental in offering high quality Pani Puri Counter. We use only fine grade SS Metal to fabricate these Pani Puri Counters. Our Pani Puri Counters are robust in construction and appealing to look at. The Pani Puri Counters are dimensionally accurate. We are offering premium quality Pani Puri Counter at very reasonable price.

We are the reliable Manufacturer and Supplier of Single Gas Burner. Our Single Gas Burner is plated with SS sheet that keeps the burner free of moisture. We provide this Single Gas Burner with heavy duty pan support, grates of cast iron, and M.S frame work. All these together make the Single Gas Burner the best equipment to choose from other available options.

Construction :

• SS pipe 1.5" legs with adjustable
• Top of 16 SWG needle valve-2 no.
• Copper pipe
• Pellet - 1 no.
• Bottom shelf 18 SWG
• HP burner - 1 set

The Stainless Steel Water Cooler, we provide, is made using the high quality Steel that enhances the strength and durability. Due to robust construction, accurate dimension, and no leakage, this Stainless Steel Water Cooler gets widely installed in the kitchens. Moreover, we provide this Stainless Steel Water Cooler in various dimensions, sizes, and patterns to meet the varied needs of clients. Construction :

• Ms frame work welded with 18 SWG SS sheet, with seamless welding on SS tank
• Double tank with puff insulation fitted with branded compressor of kirloskar
• Complete with thermostat, control switch, 2 no. dispensing taps in front, below the taps is SS dip tray with drain board and waste pipe
• Edges of the tray to be bent inside and hemmed