FAV

Mazgaon, Mumbai, Maharashtra

FAV is the manufacturer ofPTFE Compression Tube Fittings. We also supplyPTFE Tubesalong with the fittings . One stop solution for your PTFE Requirements .FAV range ofPTFE FittingsandPTFE Pipe Fittingsare widely used due to unique characteristics of PTFE Material

FAVPTFE Compression Tube Fittingsis made from Single Ferrule Design .Since it is made fromPTFE Barsit provides a much better performance then other molded ptfe fittings .

PTFE Fittings(Polytetrafluoroethylene) a fluorocarbon-based polymer is a resin supplied in powdered form, which is mixed, preformed, and extruded into a paste, and then finally tubing.PTFE Fittingstubing can be used in a large variety of applications due to its high chemical resistance, high and low temperature capability, resistance to weathering, electrical and thermal insulation, and lowest coefficient of friction of any solid material. The fittings are translucent white in Colour.

Polytetrafluoroethylene (PTFE), a strong, tough, waxy, nonflammable synthetic resin produced by the polymerization of tetrafluoroethylene. Known by such trademarks as Teflon, Fluon, Hostaflon, and Polyflon, PTFE is distinguished by its slippery surface, high melting point, and resistance to attack by almost all chemicals. The chemical resistance properties of PTFE is so broad that its use is not recommended for only a limited list of chemicals. All of these fluoropolymers are generally acceptable for a wide variety of industrial and commercial applications. Due to lack of additives and extreme chemical inertness these materials also qualify for ultrapure applications, such as using deionized (DI) water in the semiconductor, biological and pharmaceutical industries.

To summarize properties of PTFE are as follows:

1. Chemical resistance

2. Long-term weathering

3. Non-stick

4. Non-flammability

5. Low dielectric constant and low dissipation factor

6. High arc resistance, surface and volume resistivities

7. Flexibility at low temperatures and thermal stability at high temperatures

8. Low coefficient of friction

FAV range ofCondensate Potis designed to drain out foreign material from the pipeline thereby guarding critical components of instrumentation system. Generally Steam is passed through Condensation Pots. They are also known asSeal Potsor Condensing Pots.

FAVCondensate Potconnection ensures isolation of foreign material. The condensate residue is drained from the bottom valve connection .These valve can be purchased at FAV .Installation can be either vertical or horizontal lines depending on the system requirement. Alsocondensate potis used before the pressure transmitters line because temperature of steam is very high so this high temp. Steam directly may damage diaphragm of the pressure transmitter so we

We offer FAVCondensate Potin widest range possible .It is available in Stainless Steel 316, Stainless Steel 304, Carbon Steel ASTM A106 , Carbon Steel ASTM A105, Alloy Steel ASTM A335 P11 , Alloy Steel ASTM A335 P22 , Monel 400

FAV range ofThermowellprotects and extends the usage life of a temperature sensor in critical process applications where the sensor is not physically compatible with the environment. Installed directly into the piping systems, thermowellsfacilitate sensor replacement in high pressure pipelines and eliminate the need to interrupt the process flow or drain the process system for sensor maintenance function.Thermowellsare utilized when pressure, high velocity and corrosive process media exist. This serves to isolate and protect the sensing instrument, and permits removal of a sensing instrument without shutting down the process. A perfect solution for protecting the process and extending product service life.

Thermowellsare installed directly into the systems where protection of sensing equipment is critical , thermowells facilitates the continuation of process flow in the system for sensor maintenance function.

FAVThermowellshas been specifically designed for use on instrumentation, process and control systems, together with equipment employed in oil and gas, marine and shipping, chemical, chromatography, petroleum.Thermowellsprovide safe and reliable pressure measurement, while meeting challenging applications in Process Market like Chemical and Petrochemical Plants, Water and Wastewater pressure Control and Medical and Life Sciences Market like Pharmaceutical / Biotech and Food and Beverage

FAVThermowellsare available in Stainless Steel, Brass, Steel, Monel, Hastelloy C, Incoloy, Inconel 600.

Features

1)Customize your own Thermowell or Select from Standard Catalogues

2)We can make custom Thermowell upto 6000 mm

3)Variety of styles , shapes and sizes

4)Options of Thermowells end connections

Basic Selection Criteria for Thermowells

Insertion Lengths	2" to 32"
Shank	Stepped, Tapered, and Straight Shank
Process connection	1/2" to 2"
Thermowell connection	1/2" to 2"
Bore Size	1/8" to 1/2" (4mm to 12mm)
End Connection	NPT, BSP, Socket Weld
Material	SS 316 , SS 316L, SS 304 , CS, Brass, Monel and Hastelloy.Titanium

Introduction

FAVFlange to tube adapterensures Direct Connection fromflange pipe to Tube, with One Piece Machining and availability in variety of materials its best to buy from FAV. They are also knowTube Fittings Flange adaptersor simple Tube Adapters .We offer fullcustomization to suit exact needs for Clients.

Flange End

FAVFlange to tube adaptermeet ASME, DIN, EN, and JIS standards depending on clients requirement.Range of flange sizes and pressure classesavailable.Full range of sealing faces for Flanges including flat face, raised face, RTJ, and tongue-and-groove .Nominal flange sizes from NPS 1/2 to 2 in.Pressure class ratings from 150 to 2500.

Tube End

The tube end can be Metric and fractional from3 to 50 mm and 1/16 to 2 in . Double Ferrule and Nuts are provided at the Tube end as per standard .Nuts are silver coated.

Material

FAVFlange to tube adapteris available in Stainless Steel, Brass, Steel, Monel, High Duty Bronze, Hastelloy C, Incoloy, and Inconel 600.

Construction

We makeFlange to Tube Adaptersin Single Piece Construction resulting in excellent performance and long life .

Features of Flange to Tube Adapter

1) Direct transition from flanged pipe to Tube

2) One Piece Machining for best performance

3) Flange as per ASME, DIN, EN, and JIS standards

4) Available in 316 stainless steel, 304 stainless steel, Duplex .Hastelloy C-276, Inconel, Monel 400 and Monel 500, Incoloy

.5) Excellent Delivery time

6) Competitive prices with quality on par with substitute brands

7) Raw material and semi-finished components in Stock

FAV range ofCondensate Vesselsis designed to trap condensate and foreign matter that may accumulate in gaseous service lines, and purify gas media. They are often classified as condensation, isolation and separation vessels in different applications, widely used in refineries, power plants, petro-chemical and other process industries.

FAVCondensate Vesselsis available in Stainless Steel, Carbon Steel and Monel

Condensate Vesselsis designed to drain out foreign material from the pipeline thereby guarding critical components of instrumentation system. Generally Steam is passed through Condensate Vessels.Condensate Vesselsare used to collect and accumulate condensate and extrinsic particles.Condensate Vesselsaid in protecting delicate instruments with smaller orifices from becoming damaged or clogged by foreign debris. The bottom connection is used as a drain port to remove condensate.Condensate Vesselscan also be used to cool very high temperature liquids.

FAVCondensate Vessels, is available in Stainless Steel 316 , 304 , Carbon Steel, Monel. High Pressure Rating upto 10, 000 psi . SIzes from 2 OD to 6 OD

FAVCondensate Vesselsconnection ensures isolation of foreign material. The condensate residue is drained from the bottom valve connection .These valve can be purchased at FAV .Installation can be either vertical or horizontal lines depending on the system requirement. AlsoCondensate Vesselsis used before the pressure transmitters line because temperature of steam is very high so this high temp. Steam directly may damage diaphragm of the pressure transmitter .

We offerCondensate Vesselsin widest range possible .It is available in Stainless Steel 316, Stainless Steel 304, Carbon Steel ASTM A106 , Carbon Steel ASTM A105, Alloy Steel ASTM A335 P11 , Alloy Steel ASTM A335 P22 , Monel 400

Condensate Vesselsare fabricated from Seamless pipe. Standard pipe sizes are 2 to 6. Connection fittings are then installed on Condensate Pots be it NPT or welded socket adaptors, Butt Weldetc

Features

1)Customize your own Condensate Vessels that fits best in your process or select from our catalogue

2)Variety of end connections includes Male / Female NPT, BSPT, BSPP

3)Dust Cap provided

4)High Pressure/Temperature Rating Available.

Stainless Steel Braided Hose

FAV is one of the most reputed Stainless Steel Flexible Hose Manufacturer with Custom Assemblies .Assemblies are engineered to perfection in flexibility, strength and reliability. We can provide a corrugated stainless steel hose assembly that meet your most demanding technical specification. We can supply the hose complete with any all types of end connections in various types of materials. The end connection are TIG welded to hose.

BraidingCharacteristics

One and Twolayers of braiding are available standards . The braiding is highly flexible & follows the movement of the hose. The braid is normally manufactured in S.S. 304 , S.S. 316 & S.S. 321 wire.SSflexible Hose Specification can be of wide range .

Advantages of Stainless Steel Braided Hose

1. High physical strength together with light weight.

2. Suitable for wide temperature ranging from (-270C to 700 C)

3. Anti-corrosiveproperties since its fully in SS . Resistance to fire, moisture, abrasion & penetration.

4. Absorbs vibration and noise from pumps, compressors, engines etc.

5. Compensates for thermal expansion or contraction of piping.

6. A flexible & quick alternative for rigid piping in difficult location

Applications ofStainless Steel Braided Hose

1. Refineries

2. Power Plants

3. Steel Plant

4. Nuclear Installations

5. Fertilizer Industry

6. Pharmaceutical Industry

7. Cryogenic Service

8. Chemical Industry

9. Boilers

10. Paper Plants

11. Lubrication Systems

12. Automotive Industry

13. Steam, Hot Water

14. Pneumatic Service

15. Ports & Ship Yards

16. Defence Industry

17. Piping

18. Vibration Absorption

19. Railways

FAVis the manufacturers of array of durable industrial Stainless Steel 316 hose fittings. This array comprises of pipe fitting Stainless Steel nipples, Stainless Steel pipe fitting caps, SS 316 pipe fitting bend (special bend) and SS 316 industrial nuts.

We haveStainless SteelHose Fittingsfor 1 Wire Hose( R1, 1SN) , 2 Wire Hose ( R2, 2SN) , 4 Wire Hose (4SP and 4SH) and 6 Wire Hose .We keep quite a few of these fittings in stock .To know the stock status email us on sales@fav.net.in.

One Side of thehose fittingswill be suitable for Hose and will come with Crimping Ferrule . Crimping Ferrule will be use to attached the fitting body to the hose.The other side of theseStainless Steel Hose Fittingswill have NPT Male , JIC Female Swivel , NPT Female fixed or swivel , BSP Male, BSP Female Swivel or Fixed . There are other end connections also like SAE, BSPT , NPS .etc

But most common connections inStainless Steel Hose Fittingsare NPT Male JIC Female Swivel and BSP Female Swivel.

WE make fittings for PARKER , GOODYEAR , DUNLOP , POLYHOSE BRAND HOSE.

MOST OF THE HOSE FITTINGS ARE AVAILABLE EX-STOCK AND ARE CRIMPED WITH HOSES

We have all types of Hoses Fittings .Categories of Hoses include

1) Hose Fittings for High Pressure Hydraulic Hose

2) Hose Fittings for Medium Pressure Hydraulic Hose

3) Hose Fittings for Low Pressure Hydraulic Hose

4) Hose Fittings for General Purpose, Air, and Water Hoses

5) Hose Fittings for Thermoplastic Hydraulic Hose

6) Hose Fittings for Abrasion Resistant Hydraulic Hose

7) Hose Fittings for PTFE Stainless Steel Hydraulic Hoses

8) Hose Fittings for Waterblast Hoses

Custom Hose Assemblies -Made to Order

Our professional-grade hydraulic hoses and fittings can be assembled in our factory to your precise specifications.You just need to send us

1) Hose Specification

2) End Connections Specification

3) Lenght of the hose

Introduction

FAVHigh Pressure Pipe Fittingsor 10, 000 psi Fittings are crafted for High Pressure Systems, with size ranging from 1/8 to 2 and varied end connection configuration.High Pressure Pipe fittingswith both tube and pipe connections are available. Main features that call for its use are its simplicity, compactness in design, ease of assembly, high reliability, easy availability & global acceptance.High Pressure fittingsare manufactured by FAV using tapered threads that are of the highest quality.High Pressure fittingsare constructed in a variety of configurations, so they are capable of use in a broad variety of applications.

Material

FAVHigh Pressure Pipe Fittingsare available in Stainless Steel, Brass, Steel, Monel, High Duty Bronze, Hastelloy C, Incoloy, Inconel 600.

Variety

A wide array of configurations are available inHigh Pressure Pipe Fittingssuch as Nipple Fittings, Adapter Fittings, Pipe Reducer, Couplings, and various customized machined components of various styles , shapes and sizes. The end connections include BSP, BSPT, NPT, METRIC, PIPE NB, Socket weld & Screwed . Our product range in brief includes below .

WE WILL BEND THE SYPHON WHICHEVER WAY YOU WANT!

Type	Select from the options below
Operating Temperature	Carbon Steel : 210 Kg/Cm2 at 20C
	Stainless Steel : 260 Kg/Cm2 at 20C
Material	Gr. B. Carbon Steel, SS304, SS316, Monel Hastelloy, Inconel
Connection	1/4, 3/8, 1/2 BSP or NPT Male & Female
Pipe Size	1/4 & 1/2 inches, Schedule 80/40

FAV range of Double FerruleCompression Fittingswork on the proven principle of two ferrules swaging to the tube when tightened. As the nut is tightened the front ferrule swages on to the tube making a prominent leak-proof seal and the back ferrule makes a positive impression on the tube. Available in numerous configurations and sizes, ourDouble FerruleCompression Fittingsare made up of four parts consisting of a body, front ferrule, back ferrule, and nut. Outstanding leak-tight connections are consistent as the two-ferrule design compensates for any tolerances in tube outer diameter, wall, thickness, and material hardness. Our stainless steelCompression fittingsfeaturelow-torque, two-ferrule design providesfast and reliable leak-tight connections, evenin systems having high vibrationorrapidtemperature and pressure fluctuations.

FAV Fittings has been specifically designed for use on instrumentation, process and control systems, together with equipment employed in chemical, chromatography, petroleum, power generation and pulp & paper plants.

FAV Fittings are available in Stainless Steel, Brass, Steel, Monel, High Duty Bronze, Hastelloy C, Incoloy, Inconel 600. Straight fittings are machined from cold finished bar stock and shaped bodies are machined from close grain forgings. The raw materials used fully conform to the chemical requirements of one or more of the specifications listed.

FAVDouble FerruleCompression Fittingsare manufactured to stringent quality control program and standards which assure the highest quality available in the industry. We are a global industry leading provider of fitting solutions.

Advantages of FAVDouble FerruleCompression Fittings

1. FAVDouble Ferrule Compression Fittingsdo not twist the tube during installation.

2. Make and remake of the fittings is very much eased, as nuts are silver plated internally to prevent galling of threads.

3. Low torque Operation

4. Positive leak free seal assembly and reassembly

5. Size range from 1/16 to 2 (2mm to 38mm O.D.tubing)

6. Variety of end connections and patterns as per Customer Requests

Air HeaderorAir Manifoldsact as a distribution manifolds that provides users with many connection options for isolation manifolds. We offerAir Distribution Headers, which can be used with various outlet-take-off valves. ThisAir Distribution Headeris a very efficient machine to replace many unit valve assemblies, operating from one source.This Air Distribution Headeris provided with screw- able inlet connection

FAVAir Headerare available in a wide array of configurations based on end users requirement such as NPT, BSP, Butt Weld, Flanged, Socket Weld or Compression outlets.

Air Headersare used to supply several users with instrument air. Besides multiple types of standard styles we also supply theAir Headersin accordance with specific customer demands.Selection can be made from a comprehensive range of pipe styles with a variety of connections and material options, optimizing installation and access opportunities.Air Headers is a substitute for multiple valve assemblies, which normally operates from one originating point. TheAir Manifoldsare configured for accommodating various outlet valves. The inlet-connection can have variety of end connection.We supply all the accessories along withAir Headerswhich include Instrument Valves including Ball valves and Needle valves, Tube Fittings, Couplings, Instrument Pipe Fitting or any other connections based on customers requirements.

Air Headerare fabricated from bar stock which are customized based on customers drawings. We also provide special coating like Zink coating; Hot dipped galvanizing coating, Epoxy coating, Silver coating.The most widely material used Air Header or Air Manifolds s are SS 316 Needle Valves .They is also available in Stainless Steel, Brass, Steel, Monel, High Duty Bronze, and Hastelloy

FAVAir Headerhas been specifically designed for use on instrumentation, process and control systems, together with equipment employed in oil and gas, marine and shipping, chemical, chromatography, petroleum.

Gauge Cock

Pressure Gauge Cocks are used for controlling flow for basic on and off, isolation applications. It acts as a Shut-off device for pressure measuring instruments, for measurement of liquids, gases and vapours

Features

1. Available in 2 way , 3way type
2. Forged Body Construction and Bar Stock Construction . We sell in both variants .
3. Material SS316 or SS304 or Brass , Exotic Materials like Monel, Inconel , Super Duplex available on request
4. NPT , BSP ( G ) , BSPT ( R) , Metric Threads available
5. Connection Type: MXF, FxF, MXM in all the above mentioned threads
6. Suitable for pressure upto 30 kg/cm2 / 30 Bar / 750 psi
7. Suitable for gases, vapours and fluids from -10C to +50C
8. Highly corrosion and chemical resistant in stainless steel design

Ordering Criteria

1. Size Option of 1/4" , 3/8" , 1/2"
2. Threads of NPT , BSP ( G ) , BSPT ( R) , Metric
3. 2 Way or 3 Way
4. Material SS316 or SS304 or Brass , Exotic Materials like Monel, Inconel , Super Duplex

Introduction

PTFE coated Fastenersreduces the friction during use and reuse, it has brilliant anti- corrosive properties and increases the usage life of Fasteners.PTFE coated fastenersprovides exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal.Extensive testing and field use have proven that the future of coated fasteners lies with Fluoropolymer coatings. Previously hot dip, galvanized, cadium or zinc plated fasteners were considered the standard. But these coatings could not stand up to the corrosive atmospheres prevalent in many industries. The most widely used application is on B7 studs with 2H nuts. Dramatic improvements in efficiency, life expectancy and corrosion resistance are claimed to be imparted to Nut and Bolt connectors by the application of a low frictionPTFE coating. PTFE coated connectors have out-performed all others in aggressive any noticeable effect. All the material used for Manufacturing is tested for chemical & mechanical properties. The Results are confirmed to meet original material requirement before processing.

Application

PTFE Coated Fastenershave a well established reputation of doing brilliantly in the corrosive atmospheres prevalent in offshore oil and gas, offshore rigs & platforms, shipping, chemical, pharmaceutical, deep sea drilling, shipping, and marine, and power, and nuclear, electronic petrochemical, fluid.

Why use PTFE Coating

PTFE is non-stick, non-toxic self-lubricating and non-wetting, . It has brilliant anti-corrosive properties, superior heat resistant and has cryogenic constancy. All these properties ofPTFE Coatingcreates a long term advantage for a PTFE user.

Technical Specifications:Use Temperatures	Working temp. range up to + 260C
Corrosion Resistance	Salt Spray (ASTM B117) up to 3, 000 hrs (Nuts not frozen)
Pencil Hardness	5H 6H (ASTM D3363-92A)
Kinetic Friction Coefficient	0.06 0.08
Thickness	Nominal 0.001 (1 mil)
Impact	160 in lb (ASTM D2794-93)
Adhesion	5B (ASTM D3359-95)
Elongation	35%-50%
Tensile Strength	4, 000 psi
Operating Pressure	Up to 100, 000 psi

FAV range ofHydraulic Fittingsprovides secure, tough, and reliable tube connection that with exceptional leak-tight quality.

FAVHydraulic Fittingsare available in Stainless Steel, Brass, Steel and Monel.

Features

1)International Standards

2)Very effective seal between the fittings and the tubes

3)Good vibration resistance

4)High Pressure Rating Upto 10000 psi

For use with applications such as: Construction machinery, Textile machinery, Machine tools, Chemical, Marine, Military, and most other high pressure hydraulic applications.Applications using thick wall tubing where flaring is not practical.7000Flareless Fittingsare NOT RECOMMENDED for use in instrumentation applications where toxic and noxious gases are present.A bite type fitting is sometimes incorrectly referred to as a compression fitting.Compression fittingsare designed for use with soft tubing and are not interchangable with bite type fittings

Tubing sizes are measured in sixteenths of an inch. Available sizes are 1/8" through 2". When ordering, the tube end of the fitting must be specified first followed by the pipe thread or straight thread end. All fittings in this section are ordered as assemblies only unless otherwise specified by customers when ordering

Hydraulic fittings consist of a body, a one-piece ferrule, and a nut are available in carbon steel, brass, and stainless steel. With a large number of configurations, there will be a fitting that is ideally suited to meet the requirements of almost any industrial application. On assembly, the ferrule bites into the outer surface of the tube with sufficient strength to hold the tube against pressure and seal the fluid, without considerable distortion of the inside tube diameter. Hydraulic fittings have a visible bite, allowing the fitting assembler to visually inspect the bite quality, thus significantly minimizing the risk of improper assembly and related service problems.Hydraulic fittingsare especially suitable for use with tube wall thickness ranging from medium to extra heavy. For proper bite, bottoming out the tube is essential for the make-up of the fitting. Leak-free performance is guaranteed when bite type fittings are assembled properly. No special tools are required to obtain proper installation.

Hydraulic fittingsare also suitable for use with soft metal tube and various types of plastic tubes such as nylon, polyethylene, etc. When used with plastic tube, it is strongly recommended that a tube insert, be used to prevent tube pull out due to tensile loading.

Our expertise lies in successfully designing and manufacturing ofHydraulic fittingsWe can deliver these in different designs as per the specific application demands. The range include Flareless Fittings, Flareless Bite Type Fittings, Union Fittings, Connectors, Elbow Fittings, Adapter Fittings, Tee Fittings, Nipple fittings, End Closure fittings, Cross Fittings and Nut & Ferrule fittings.

• STANDARD SERIES CLAMPS
• HEAVY SERIES CLAMPS
• TWIN SERIES CLAMPS
• ALUMINIUM TUBE CLAMPS
• MULTILAYER CLAMPS VERTICLE ONLY
• MULTIPLE CLAMPS - VERTICLE OR HORIZONTAL STACKING

• Pipes & Tubes of Steel , Stainless Steel , Exotic Materials like Monel, Hastelloy , Inconel, Titanium can be used .
• These are Standard Clamps Designed as per DIN 3015
• Standard Pipe - Tube clamps available in Polypropylene Plastic body with Steel , SS 304 , SS 316 plates & bolts . Steel Components undergo trivalent coating for anti-corrosive measure , better performance and Smooth Finishing
• Pressure. range up to 1500 PSI to 8000 PSI for application in Steel / stainless steel piping system
• Further we have Full details of standard series Pipe - Tube clamp in our catalogue.Catalogue contains proper Selection Guide, Dimensions and Part Numbers.

FAVPrecision Pipe Fittingsare designed and configured for instrumentation, process and fluid control.Precision Pipe fittingare available in a variety of configurations, end connections and sizes that fulfill the need for leak-free performance of Process System. Main features that call for its use are its simplicity, compactness in design, ease of assembly, high reliability, easy availability & global acceptance.

Pecision Pipe Fittingsare available as standard in Brass and 316 Stainless Steel.Precision Pipe Fittingscan also be supplied in other materials including Monel, Hastelloy C276, Inconel, Incoloy, Duplex, Super Duplex and Titanium, as well and in special shapes. While the standard materials are 316 stainless steel, brass and carbon steel, we can also manufacture these fittings in other materials to meet your companys needs.

Various type of threads available like NPT (National Pipe Taper) and exceed the requirement of ANSI B1.20.1., BSP/ISO (British Standard Pipe/International Standard Organisation)., SAE/MS straight thread.,

The basic fitting capabilities show the fittings will stand up during prolonged exposure to temperatures as high as 800F. Those ratings are dependent upon the design and whether the fitting is 316 stainless steel or brass. Fittings made of 316 stainless steel are heat code traceable for the benefit of your operation.

All exposed threads protected with plastic caps to prevent damage and packed in sealed, clear plastic bag for cleanliness.

Precision Pipe Fittings are manufactured from bar stock and forging for connection between pipe of Instrumentation and Process Control being used in Chemicals. Petrochemicals, Pharmaceuticals, Fertilisers as well as other major industries. All exposed threads are protected with plastic end caps.

A wide array of configurations are available in Instrument Pipe Fittings such as Nipple Fittings, Adapter Fittings, Pipe Reducer, Couplings, and various customized machined components of various styles , shapes and sizes.

Advantages of FAV Precision Pipe Fittings?

1)Variety of styles , shapes and sizes

2)Variety of configurations and materials such as S316, brass and carbon steel.

3)Sizes available from 1/8 to 2 NPT.

4)Options of Precision thread end connections

5)Very effective seal between the fittings and the pipe.

FAV range ofJIC Fittingswork best on high pressure hydraulic applications.JIC Fittingscome in variety of styles , shapes and sizes and work on high pressure hydraulic applications .

These Fittings are also known as 37 DegreeFlare FittingsorJIC Fittingor Flare Fitting.

JIC Fittingscomprises of three precision machined components like Body, Sleeve and Nut. Main construction consists of three pieces: the body, sleeve & nut. The tube end is flared to 74 degrees included angle and held in between the main body nose and the sleeve nut which is on top of them, thus resulting in a very effective leakproof joint, full flow connection in process tubing.Flare fittingdesign allows for repeated disassembly and re-assembly with no need to replace any components. A wide range of configurations are available such as straight connectors, elbows, union, tees, and crosses as well as unique special adapters. Standardflare fittingmaterials include brass, carbon steel, and stainless steel.

FAVJIC Fittingsare available in Stainless Steel, Brass, Steel, Monel, High Duty Bronze, Hastelloy C, Incoloy, Inconel 600.

Features

1)International Standards

2)Combine JIC Connection with Variety of end connections of Male / Female NPT, BSPT, BSPP

3)Very effective seal between the fittings and the flared tube

4)Good vibration resistance

5)High Pressure Rating Upto 20000 psi

JIC fittingsare engineered to save the user money and time. They are economically priced and provide excellent service as well as longevity. Providing exceptional results and quality service, these 37flare fittings are favoured by many industries and consistently exceed the users expectations.

FAV is the Manufacturer ofMonel Double Ferrule Compression Tube Fittingswhich includes Monel Female Connector, Monel Union, Monel Union Tee, Monel Union Elbow, Monel Bulkhead Connector , Monel Tube to Tube Union, Monel Male Connectors

Monel exhibit a number of beneficial properties, including:

1. high corrosion resistance to acids and Alkalis.

2. high mechanical strength.

3. good ductility.

4. a low coefficient of thermal expansion

Monelis well known for its high strength and corrosion resistant properties. It works in a wide range of temperatures, and is available in multiple forms for a variety of products. Monel is used extensively in (for pipe) piping. Resistant to both steam and seawater, its toughness and anti-corrosive properties make it perfect for heavy duty applications such as transfer (pipe) piping used in oil refineries.

Inconel Tube Fittings

Fav is the manufacturer ofinconel Tube fitting, Inconel Tube x Tube union, Inconel union elbow, Inconel bulkhead connector, inconel tube fitting.

Inconel nickel-chromium-iron is a engineering material which require resistance to corrosion and heat. The alloy also has superb mechanical properties and presents the desirable combination of high strength and good workability. The high amount of nickel content gives the alloy resistance to corrosion by many organic and inorganic compounds and also makes it virtually immune to chloride-ion stress-corrosion cracking.

Applications include chemical processing, pollution control, oil and gas recovery, acid production, pickling operations, nuclear fuel reprocessing and handling of radioactive wastes.

Fav is the manufacturerTitanium Tube Fitting.Titanium Female Connector, Titanium Union, Titanium Union Tee, Titanium Union Elbow Titanium Bulkhead Connector.

Titanium Tube Fitting

Titanium Grade 2may be considered in any application where formability and corrosion resistance are important, and strength requirements are moderate. Ti Grade 2 has also been widely used in marine and chemical applications such as condensers, evaporators, reaction vessels for chemical processing, tubing and tube headers in desalinization plants, and cryogenic vessels. Other uses have included items such as jigs, baskets, cathodes and starter-sheet blanks for the electroplating industry, and a variety of medical applications.

FAV Pipe Fittingsare designed and configured for instrumentation, process and fluid control. Pipe fittingare available in a variety of configurations, end connections and sizes that fulfill the need for leak-free performance of Process System. Main features that call for its use are its simplicity, compactness in design, ease of assembly, high reliability, easy availability & global acceptance.

Instrument Pipe Fittingsare available as standard in Brass and 316 Stainless Steel. Pipe Fittings can also be supplied in other materials including Monel, Hastelloy C276, Inconel, Incoloy, Duplex, Super Duplex and Titanium, as well and in special shapes. While the standard materials are 316 stainless steel, brass and carbon steel, we can also manufacture these fittings in other materials to meet your companys needs.

Various type of threads available like NPT (National Pipe Taper) and exceed the requirement of ANSI B1.20.1., BSP/ISO (British Standard Pipe/International Standard Organisation)., SAE/MS straight thread.,

The basic fitting capabilities show the fittings will stand up during prolonged exposure to temperatures as high as 800F. Those ratings are dependent upon the design and whether the fitting is 316 stainless steel or brass. Fittings made of 316 stainless steel are heat code traceable for the benefit of your operation.

All exposed threads protected with plastic caps to prevent damage and packed in sealed, clear plastic bag for cleanliness.

Pipe Fittingsare manufactured from bar stock and forging for connection between pipe of Instrumentation and Process Control being used in Chemicals. Petrochemicals, Pharmaceuticals, Fertilisers as well as other major industries. All exposed threads are protected with plastic end caps.

A wide array of configurations are available in Instrument Pipe Fittings such as Nipple Fittings, Adapter Fittings, Pipe Reducer, Couplings, and various customized machined components of various styles , shapes and sizes.

Advantages of FAV Instrument pipe fittings

1)Variety of styles , shapes and sizes

2)Variety of configurations and materials such as S316, brass and carbon steel.

3)Sizes available from 1/8 to 2 NPT.

4)Options of thread end connections

5)Very effective seal between the fittings and the pipe.

FAV range of Pipe fittings are used to tighten the pipe ends to form leak-free and dependable systems.

Features

1)Simplicity and compactness in design

2)Easy availability , global acceptance and arecompatible with similar international brands

3)Size range from 1/16 to 4

4)Variety of end connections include NPT, BSP, SW with Option of Male and Female Ends

FAV offersweld fittingsin a variety of materials, sizes, and shapes to suit any industrial or high-purity application. Permanent, high-integrity connections provide strength and reliability in a range of alloys to meet your requirements for quality and corrosion-resistance.

OUR FAV WELD FITTINGS INCLUDE

TUBE BUTT WELD FITTINGS

TUBE SOCKET WELD FITTINGS

PIPE BUTT WELD FITTINGS

TUBE SOCKET WELD FITTINGS

WELD ADAPTER

PIPE TO WELD FITTINGS

ADVANTAGES OF Weld Fittings

1. Welding on Fittings is a permanent attachment method. Once a weld is made the part must be damaged or destroyed to disassemble it.

2. Welding method on Fittings used welding can create a continuous joint with lower stress concentrations, while bolting will always have stress concentrations at each bolt.

3. Weldingon Fittings is stronger than nuts and bolts or rivets because when you weld you are heating the material and exciting its atoms. When enough energy is added, atoms combine. The result is two or more separate nuclei that share a common electron cloud.

4. Welding equipments are easily available and hence welding the Fittings becomes easy.

Weld fittingshave been strategically engineered and designed so they can serve a wide range of applications safely and accurately. These are designed to be used in chemical, pulp and paper, dairy, pharmaceutical, power generation, food, marine construction or ship building, beverage and all other kinds of industries requiring high-purity fittings. Whether your application requires 316 stainless, metric, imperial or special fitting needs, FAV has what you need. Our fittings include the union, union elbow, union tee, male connector, female connector, male elbow, female elbow, pipe weld to tube socket weld, tube weld to tube socket weld and more.

FAVWeld Fittingfeatures include Tapered socket weld ports to speed layout for proper tube fit and tube alignment, Automatic tube weld and butt weld design, Size range from 1/8 thru 1 O.D. tubing and Mini and long tube end design

FAV InstrumentBall Valvehave been carefully manufactured and tested for High Pressure Applications. Our InstrumentBall Valveare available in a variety of materials and end connections .They are highly durable and provide effective performance without any leakage.Instrumentation Ball Valvesoffered by us, are used primarily on upstream offshore/onshore oil production and initial processing installations. Made from high quality carbon steel and brass these Ball Valves provide speedy one fourth turn shut off. These valves either provides the directional control of fluids consumed in process power and instrumentation function. Our ball valves come at reasonable price and are in great demand due to its high quality and performance

End connection options include male / female NPT, Tube OD Ferrule Compression , and ISO threads from 1/8 to 1. Configurations include 2-way, 3-way (side / bottom entry) and 4-way valves. Optional features include panel mounting, locking devices and upstream / downstream venting.

InstrumentationBall Valvehas come with a wide variety of port sizes, end connections, style, and temperature and pressure tolerance. FAV Ball Valves are critical for instrumentation, fluid and process control system.

Advantages of Ball Valve?

1. Low operating Torques2. Variety of end connections includes Male / Female NPT, BSPT, BSPP3. Every valve is factory tested4 .Innovative Compact design

5. Available in variety of material

FAV range of Brass Single Ferrule Fittings, Double Ferrule Fittings and Pipe Fittings are widely used with Brass, Copper or Iron pipe and tube.

Brass Fittings are manufactured in Heavy and Light Series depending on pressure requirement.

Features

1)Ferrules are chemically treated for better performance.

2)Dust Cap Provided

3)Variety of end connections and patterns as per Customer Requests

Made-To-Order High Pressure Hose Assemblies by FAV .

All our High Pressure Hydraulic Hose Assemblies are made using Parker Hose .Our professional-grade hydraulic hoses and fittings can be assembled in our workshop to your precise specifications. Generally high pressure hose are used for water blasting needs. They are also used for high-impulse hydraulic applications like oil and gas, mining, construction, and manufacturing

For Different sizes we have different pressure Ratings available .

For 1/4" we have 10000 psi

For 3/8" we have 10000 psi, 14500 psi & 20000 psi Hose

For 1/2" we have 10000 psi, 14500 psi & 20000 psi Hose

For 3/4" we have 10000 psi, 14500 psi & 20000 psi Hose

For 1" we have 10000 psi, 14500 psi & 20000 psi Hose

For sizes above 1" , like 1 1/4" , 1 1/2" & 2" you can inquire with us for availability ,

High Pressure Hydraulic Hose Assemblies Can be customizes with following end connections.

1) NPT Male

2) NPT Female Swivel

3) BSP Male

4) BSP Female Swivel

5) JIC Male

6) JIC Female Swivel

7) SAE 45 degree Male

8) SAE 45 degree Female Swivel

9) Metric Threads Male

10) Metric Threads Female Swivel

1) Size

3) End Connections Material , Size & Type

Air Headers are used to supply several users with instrument air. Besides multiple types of standard styles we also supply the Air Headers in accordance with specific customer demands.Selection can be made from a comprehensive range of pipe styles with a variety of connections and material options, optimizing installation and access opportunities.Air Headers is a substitute for multiple valve assemblies, which normally operates from one originating point. The Air Manifolds are configured for accommodating various outlet valves. The inlet-connection can have variety of end connection.

FAV range ofQuick Release Couplingsis designed for quick connect and disconnect applications.

FAVQuick Release Couplingsare available in Stainless Steel, Brass, Steel, Monel, High Duty Bronze, Hastelloy C, Incoloy, Inconel 600.

Quick Release Couplings type coupling work on Push and Pull principle. When the Adaptor is pushed to the coupler, its is accurately held by the self locking arrangement resulting in a positive & leak proof connection. This action simultaneously opens the valve & fluid flow starts. To disconnect, pull back the sleeve of the coupler, the Adaptor ejects out and the valves shut off automatically. Valves are provided in type one way sealing & two way sealing

Features

1)Since both the plug and socket have a value, there is no leakage of gas, oil, etc. from either the socket or plug ends when disconnected.

2)Manufactured by high precision machining process

3)Designed for use in a wide range of applications.

Quick release coupling - through bore type

Bore typequick release couplingshave no check valves. These are ideal for maximum flow application. Their smooth, open bore offers the lowest pressure drop of anyquick disconnected couplingsand allows them to be through cleaned. Since there is no valves, fluid flow should be shut off before the coupling is disconnected.

Application :-

Where quickly detachable and rotatable connections are needed

Also used where regulation and closure of line is achieved by back up valves

Quick release coupling - single check valve type

One way sealing with one check valve build in to coupler only, where as plug do not have any check valve.

Quick release coupling - double check valve type

Plugs- Widest range of Pipe Plugs by FAV.

Heat exchanger Ferrules and Tube Inserts

Tube inserts and Tube ferrules are a metal inserted into the end of a heat exchanger tube to provide protection to the Tube mouth ends of a shell & tube type heat exchanger. The need for this Tube Ferrule arises as all tube failures occur within the first few inches of the heat exchanger tube inlet-end. The solution to this situation is the use of a thin wall covering in form of metal tube insert expanded full length into the inlet-end of condensers and heat exchangers. FAV tube insert is designed to ensure a smooth and gentle transition of the fluid down the tube insert to the condenser or heat exchanger tube. We have Metal tube insert and Plastic/Delrin Tube Inserts.

The purpose of the Tube Ferrule Inserts

1) Protect inlet-end erosion & corrosion

2) Act as a protective layer

3) Reduce the medium impact

4) Transfer extremely high heat past the tube sheet to the exchanger tubes.

Common problems at Shell & Tube Type Heat Exchangers

1. Tube-end erosion/corrosion

2. Stress Corrosion Cracking

3. Crevice corrosion

4. Localized pitting

5. Ammonia grooving

6. Improper tube expansion

7. Weakened tube-to-tube sheet joints

For the above problems, FAV tube ferrule inserts offers its most cost-efficient tube protection , repair, Shield/Seal, also known as a tube insert or ferrule. Although inserts are typically only 3" - 15" long, some applications have required lengths up to 3 metres.

FAV range ofAir Distribution Potsdesigned to trap condensate and foreign matter that may accumulate in gaseous service lines, and purify gas media. They are often classified as condensation, isolation and separation vessels in different applications, widely used in refineries, power plants, petro-chemical and other process industries.

FAVAir Distribution Potsavailable in Stainless Steel, Carbon Steel and Monel

Air Distribution Potsdesigned to drain out foreign material from the pipeline thereby guarding critical components of instrumentation system. Generally Steam is passed through Condensate Vessels.Air Distribution Potare used to collect and accumulate condensate and extrinsic particles.Air Distribution Potaid in protecting delicate instruments with smaller orifices from becoming damaged or clogged by foreign debris. The bottom connection is used as a drain port to remove condensate.Air Distribution Potcan also be used to cool very high temperature liquids.

FAV Condensate Vessels, is available in Stainless Steel 316 , 304 , Carbon Steel, Monel. High Pressure Rating upto 10, 000 psi . SIzes from 2 OD to 6 OD

FAVAir Distribution Potconnection ensures isolation of foreign material. The condensate residue is drained from the bottom valve connection .These valve can be purchased at FAV .Installation can be either vertical or horizontal lines depending on the system requirement. AlsoAir Distribution Potis used before the pressure transmitters line because temperature of steam is very high so this high temp. Steam directly may damage diaphragm of the pressure transmitter .

We offerAir Distribution Potin widest range possible .It is available in Stainless Steel 316, Stainless Steel 304, Carbon Steel ASTM A106 , Carbon Steel ASTM A105, Alloy Steel ASTM A335 P11 , Alloy Steel ASTM A335 P22 , Monel 400

Air Distribution Potare fabricated from Seamless pipe. Standard pipe sizes are 2 to 6. Connection fittings are then installed on Condensate Pots be it NPT or welded socket adaptors, Butt Weldetc

Features

1)Customize your own Air Distribution Potthat fits best in your process or select from our catalogue

2)Variety of end connections includes Male / Female NPT, BSPT, BSPP

3)Dust Cap provided

4)High Pressure/Temperature Rating Available.

FAV range ofSampling Cylinderis designed to provide safe containment for storage, examination and transportation of both liquids and gases. We have ability to customizeSampling Cylinders to suit your exact needs . The range is designed for and used across the world in various industries, including petrochemical refineries and well sites, analytic laboratories, alternative fuel technologies, and manufacturing.

FAVSampling Cylinderis available in Stainless Steel 304, Stainless Steel 316, Carbon Steel, Monel, Hastelloy, Inconel.

Features

1)Customize your own Sampling Cylinder that fits best in your process

2)Entire System available which include Pressure Gauges, Needle Valves and Pipe Fittings

3)Sampling cylinders in different capacity of 150 cc, 300 cc, 500cc, 1000cc, 1500cc

4)Variety of end connections includes Male / Female NPT, BSPT, BSPP

5)Dust Cap provided

6)Standard Pressure Rating of 500 psi , 1000 psi , 2000 psi , 3000 psi and 6000 psi .High Pressure Rating upto 10000 psi

Typical Applications

Sampling hydrocarbons in refineries and petrochemical plants

Gas sampling for chromatographic analysis

Snubbers in reactor feed lines

Surge accumulators in high pressure gas systems

High vacuum systems as experimental chambers and molecular sieves

Chemical reaction vessels

Condensate Pot is designed to drain out foreign material from the pipeline thereby guarding critical components of instrumentation system. Generally Steam is passed through Condensation Pots. They are also known as Seal Pots or Condensing Pots.Condensate Pot connection ensures isolation of foreign material. The condensate residue is drained from the bottom valve connection .These valve can be purchased at FAV .Installation can be either vertical or horizontal lines depending on the system requirement. Also condensate pot is used before the pressure transmitters line because temperature of steam is very high so this high temp. Steam directly may damage diaphragm of the pressure transmitter so we Condensate Pots are fabricated from Seamless pipe. Standard pipe sizes are 2" to 6". Connection fittings are then installed on Condensate Pots be it NPT or welded socket adaptors.

High Pressure LP MP HP Type M Fitting

FAV range of High Pressure LP MP HP Type M Fitting Adapters and Coupling starts from 10000 psi upto 60000 psi. There are categorised into Low Pressure LP, Medium Pressure MP, High Pressure HP Adapters and Coupling

FAV is the manufacturer Adapters and Coupling ranging from 10000 psi upto 60000 psi

The hardened threads with smooth surface finishing avoid galling and help to extend the fitting service life.Every fitting is stamped with size and material316 stainless steel is standard material. Other materials are available upon request

The Threadiings option available are as below . You can select any options for adaptors and couplings from below .

1. Low Pressure LP Female with Gland and Cone
2. Low Pressure LP Male
3. Medium Pressure MP Female with Gland and Cone
4. Medium Pressure MP Male
5. High Pressure HP Female with Gland and Cone
6. High Pressure HP Male
7. JIC Male
8. JIC Female Swivel
9. Type "M" Male
10. NPT Male
11. NPT Female
12. BSP Male
13. BSP Female