Plastic Testing Equipment in Faridabad

• MOQ : 1 Piece
• Power Source : Battery, Electric
• Operating Current : Double Phase
• Supply Type : Manufacturer
• Color : Sky Blue
• Country of Origin : India
• Feature : Easy To Use, Electrical Porcelain, Four Times Stronger, Superior Finish
• Condition : New
• Automation Grade : Automatic

more...

• Capacity : 500 gm × 0.1 gm
• Supply Type : Manufacturer
• Material : Plastic
• Weight of sled : 200 ± 5 gm
• Country of Origin : India
• Condition : New
• Related Standard: : Astm D 1894
• Sled size : 63.5 × 63.5 × 6 mm

COF tester –horizontal plane have a Sled of specified dimensions with a suitable eye screw fastened in one end for the holding to the load cell by a flexible nylon thread. There is a moving plane which is polished plastic, of specified dimensions. A smooth, flat piece of glass covers the upper surface o more...

• Country of Origin : India
• Feature : Easy To Use, Proper Working, Superior Finish
• Application : Industrial Use
• Display Type : Digital
• Supply Type : Manufacturer
• Warrenty : 1year

more...

• MOQ : 1 Piece
• Power Source : Electric
• Country of Origin : India
• Material : Metal & Plastic
• Automatic Grade : Automatic
• Warrenty : 1year
• Application : Industrial
• Certification : ISI Certified

Melt Flow of thermoplastic material is defined as the rate of flow in grams per ten minutes of extrude of molten resins through a jet of a specified length and diameter under prescribed conditions of temperature, load & piston position in a cylindrical cavity inside a heated metallic tube barrel at the me more...

• Speed of Traverse of Plane : 150 ± 30 mm/min
• Weight of Sled : 200 ± 5 gm
• Country of Origin : India
• Sled Size : 63.5 × 63.5 × 6 mm
• Capacity : 500 gm × 0.1 gm
• Warranty : 1 Year

COF tester –horizontal plane have a Sled of specified dimensions with a suitable eye screw fastened in one end for the holding to the load cell by a flexible nylon thread. There is a moving plane which is polished plastic, of specified dimensions. A smooth, flat piece of glass covers the upper surface o more...

• Range : 0 – 25mm
• Least count/resolution : 0.01mm

Cupping Testing Machine is a consistent tool useful for determining the drawability of sheet metal components and non-ferrous metal sheets. Accurate and reliable testing of adhesion, hardness, the porosity of coatings of paints or varnish in metal sheets, strips, etc. in sheet metal, metallurgy, rubber indust more...

• temperature : 400°C

Presto Melt Flow Index tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a jet of a particular length and diameter. The test is carried more...

Presto’s Balloon Burst Tester is used to test the 3-sided seal of the flexible packing. Using the pneumatic system to create the pressure inside the packet, the machine checks for any leakage in the seals. The 4th side of the packet is left open to blow-in the pressure. This pressure can be controlled with more...

• Supply Type : Manufacturer
• Display for Dynamic and Kinetic Friction - : Force
• Feature : Feather touch controls,Easy To Use, Provides highly accurate lab testing results

Coefficient of Friction Tester is a consistent tool to indicate the starting and sliding friction of plastic films and sheets when sliding over itself or other substance at specified test condition. PRESTO Coefficient of Friction Tester is manufactured under various Test Standards ASTM D618, ASTM D 883, BS 27 more...

• Dimensions : 300x644x642 mm
• Feature : Automatic Sample Cutting,Microprocessor-based PID Controller,Compact And Stable Structure
• Supply Type : Manufacturer
• Display : Digital 7 Segment
• Sample Cutting Motor : 2 Torque 7Kg/cm, 60RPM
• Temperature Range : Ambient to 350 ºC

  The melt flow rate of the polymers is one of the essential properties of the materials that will help the manufacturers in determining the rate at which it flows. This property of the material is important as it provides the necessary data on the mass flow rate of the polymer. Thus, to test the melt flow p more...

• Display : HMI Based touchscreen 7"
• Temperature Range : Ambient to 400º C
• Material of Heating Barrel(Cylinder) : Die Steel
• Load Cell Range : 800 gm, Least count 0.01 gm
• Dimensions : 400 x 580 x 630 mm
• Supply Type : Manufacturer

If you are working in the plastics or polymer industry, then you should be aware that it is important for manufacturers to test the melt flow rate of these materials. The melt flow rate of the materials is considered to be the measure of the flow of polymers when it will be melted. The result of the melt flow more...

• Power : 220V, Single phase, 50 Hz
• Speed : 150 ± 30 mm/min
• Motor : 1/4 HP Single Phase , 1440 rpm

Co-efficient of friction tester is mostly used to evaluate the coefficient of starting and sliding friction of plastic sheets, papers, films, and pipes. It measures the kinetic and static friction of the test specimen when it slides over substance in a specified test situation. more...

• diameter : 9.55mm

Presto’s Melt Flow Index tester is designed exclusively for the perfect measurement of melt flow rate of molten plastics or granules. The Plastic melt flow index tester is calculated by performing a manual automatic test procedure on a testing instrument in order to check the melt volume rate of the flow of more...

• weights : 1.2 Kg, 2.16 Kg, 3.8 Kg

In plastic manufacturing industries, many properties of plastics and Polypropylene are needed to be examined that explains whether the material is appropriate for an application or not. These properties show the visible effect on the strength and durability of these products. The major factor of the help to m more...

• Power : 220V
• Material : Mild Steel
• Frequency : 50 Hz
• Brand : PRESTO
• Temperature Range : Ambient to 400 degree C
• Phase : Single phase

more...

Presto’s Co-efficient of friction tester is mostly used to evaluate the coefficient of starting and sliding friction of plastic sheets, papers, films, and pipes. It measures the kinetic and static friction of the test specimen when it slides over substance in a specified test situation.  The test is done t more...

Cupping Testing Machine  is an amazing table top machine which is used to regulate the drawability of metal components, painted metal sheets and non-ferrous metal sheets. The instrument is used to perform accurate and reliable testing of adhesion, strips, hardness, permeability of coatings of paints or varni more...

• MOQ : 1 Unit
• Automatic Grade : Semi Automatic
• Driven Type : Electric
• Supply Type : Manufacturer
• Voltage : 230V
• Brand : Tej
• Country of Origin : India
• Phase : Single Phase

more...

• Material : Mild Steel
• Country of Origin : India
• Automatic Grade : Semi Automatic
• Supply Type : Manufacturer
• Voltage : 230V
• Power Supply : AC
• Driven Type : Electric

more...

• Supply Type : Manufacturer
• Material : Mild Steel
• Voltage : 230 V
• Digital Timer : 0 to 999.9 Second
• Power : 1 KW
• Temperature Range : Upto 300 C
• Power Supply : AC
• Brand Name : Tej

more...

• Temperature Range : Ambient : 400°C.
• Sample Cutting : Motorised which controlled by microprocessor based position controlled card
• Reference Standards : ASTM, ISO, IS, DIN
• Supply : 230 VAC/50Hz/750Watt
• Model No : AE-MFI-A-AC
• Temperature Accuracy : +/- 0.1°C.
• Timer Range : 999 Seconds.
• Paint : Powder coated
• Temperature Resolution : 0.1°C.
• Temperature Controlling System : Microcontroller based Micro-PLC PID.

Accessories Piston with inbuilt level indicator - 1 No, Orifice (Tungsten Carbide) -1 No; Material, charger -1 No, Sample cutter - 1 No; Barrel cleaner -1 No; Orifice cleaner -1 No; Funnel -1 No; Spoon -1 No; Twisser -1 No; Mirror with stand. Application To measure the melt flow rate of thermoplastic polymers more...

• Load Capacity : 0 – 9.999 kg.
• Paint : Powder coated
• Resolution : 1 gram
• Speed of Testing : 150 mm/min (others optional) ***
• Reference Standard : ASTM
• Weight of the Sled : 200 grams
• Data Entry : Through alpha-numeric keys.
• System Status : Digital + Printer.
• Result : Displayed on LCD & will be printed through printer.
• Power : 120 Watts

more...

As per ASTM D1238 - "A" & “B” Method and ISO-1133. MELT FLOW INDEX TESTER - Model: AE-MFI-A-MC Temperature Range: Ambient to 400 °C. Resolution: 0.1°C. Accuracy: +- 0.1°C. Timer Range: 999 Seconds. Resolution: 1 Second. Sample Cutting: Manually. Weights: 2.16 Kg, 5 Kg. (other optional). Accessories: St more...