Fabric Testing Equipment in Faridabad

• Display : TFT Touch Screen Display
• Load Sensor : 2 millivolt
• Accuracy : +- 2%
• Capacity : 5000 gm

more...

• Motor : 2 RPM
• Weight of pendulum : 500, 1000, 2000, 3000, 5000 SU
• Power : 220V, 50Hz, single phase
• Weight of stud : 10 ± 0.001gm
• Angle : 7.5°, 15°
• Sample size : 70 ± 1mm X 38.1 ± 0.3mm

Presto’s stiff resistance tester is the perfect tool to measure the flexural strength of the paper and linear boards or paper boards. Assessing this property is important as it decides the economic value of the paper. It complies with the testing standards of TAPPI – T489 OM-08. It measures the flexural r more...

Presto’s round cutter is mainly used for precise circular cutting to check the grammage of samples. The cutter cut out the specimen of 100 cm2, which is exactly equals to 1/100 th  of a square meter accurately and rapidly. The result is in grams when multiplied by 100 gives the GSM directly, i.e. gram per more...

• Size : – 5 x 5 cm
• Length : 100 ± 3 mm

Presto’s Crock Meter is used to determine the fastness of printed and dyed textiles to wet and dry rubbing. Complete with a pre-set rotary counter. Crockmeter is a unique test instrument to determine the colorfastness of textile materials against rubbing under either dry or wet condition. It checks the colo more...

• diameter : 113 mm.

Presto’s round cutter is mainly used for precise circular cutting to check the grammage of samples. The cutter cut out the specimen of 100 cm2, which is exactly equals to 1100th of a square meter accurately and rapidly. The result is in grams when multiplied by 100 gives the GSM directly, i.e. gram per squa more...

• Power : 220V, 50Hz, single phase
• Motor : 2 RPM

To test the paper, the specimen is mounted on the tester using the clamping system. Located at the pendulum, the lower faces of the clamp jaws are at the centre. The jaws adjust themselves according to the different thickness of the test paper. more...

• Test time : 15 seconds
• Feature : Overload protection (Preset), Peak force value
• Accuracy : ±2% of reading
• MODEL : PCS 3.0 Prima Series
• Supply Type : Manufacturer

Presto has recently introduced a crease stiffness HMI tester to test the crease resistance and board stiffness of various products like carton board, paper, printing, and packaging materials. The board stiffness and crease recovery are critical in the performance of cartons, especially on high-speed packaging more...

• Feature : Peak Force Value,Basic Ease Of Use,Measuring Range: 0 - 5000 Grams. Test Time 15 Seconds
• Stiffness Angle : 15 Degree
• Supply Type : Manufacturer
• Capacity : 5000 gm
• MODEL : PCS

Crease Stiffness Tester is a multi-function stiffness tester, mainly used for measuring cardboard, color box (such as case cosmetic box) of the indentation force (that is, 90° crease of the rebound force), can also measure a variety of cardboard Bending stiffness is achieved on the same instrument with two m more...

• Material of Main Body : Die-cast Aluminum
• Supply Type : Manufacturer
• Application : Industrial
• Safety Latch : Yes
• Features : Lightweight and resilient, Highly accurate test results, Available with Safety Latch Facility
• Sample Area : 100 cm²

PRESTO Round Cutter for Grammage GSM Round cutter is useful for precise circular cutting to check the grammage of samples. The sample cutter cuts out a circular specimen of 100? Which is exactly 1 / 100th of a square meter, rapidly and accurately. The Presto Round Cutter designed for Grammage GSM measurement more...

• Feature : Easy to fix,Dimensional accuracy,Light weight

more...

• Brand Name : M&T Engineering works
• Size : 2feetx6inchx9inch
• Rated Power : 250W
• Shape : Rectangular
• Application : Laboratory
• Condition : New Used
• Power Source : Electric

Our basic materials, which are used for the production of our finished goods, are cross examined over diverse aspects in order to ensure its excellent quality. The checking is done by our experts. In order to suit varied requirements of the clients, we have developed a secure payment procedure that have assor more...

• Price : Rs 3,500 / Piece
• MOQ : 1 Piece

Working in assistance with a brilliant inventory management system and capacious storehouse has enabled us to entertain urgent and massive requirements of the customers. With the assistance of our reliable transportation facilities, we have become capable of delivering the orders on time. Features : Sturdines more...

• Diameter of rubbing finger : 16 mm
• Size of sample : 195*60 mm

Crockmeter is a unique test instrument to determine the colorfastness of textile materials against rubbing under either dry or wet condition. It checks the colorfastness to crocking when the test specimen is subjected to continuous rubbing by an abrading finger which rubs against it under specified load. The more...

• Horizontal : 41.50
• Test accuracy : 0.1mm

Stiffness Tester helps to determine the bending height, flexural rigidity and bending modulus of fabrics. It employs the principle of cantilever bending; a rectangular sample is supported on a smooth low-friction horizontal platform, with adjustable bend angle indicator, below the plane of the platform surfac more...

Martindale Abrasion cum Pilling Tester is used to check the abrasion as well as pilling resistance of the fabric. The equipment is designed to subject specimens under test to a controlled amount of rubbing at comparatively low pressures and in continuously changing directions to ensure that all surface fibers more...

• diameter : 113 mm.

presto’s gsm round cutter is used to cut the accurate shape and size of specimens rapidly and accurately to check the weight or grammage of the samples. The portable gsm round cutter tool is used to cut the sample of size 100 cm2, which exactly equals to the 1/100th of a square meter. The gsm round cutter i more...

Product Description PRESTO Round Cutter for Grammage GSM Round cutter is useful for precise circular cutting to check grammage of samples. The sample cutter cuts out circular specimen of 100 cm², which is exactly 1 100th of a square meter, rapidly and accurately. The result is grams, multiplied by 100, gives more...

Stiffness Tester is a consistent tool useful to measure stiffness or flexural rigidity of paper and paper board. Stiffness Tester is used to determine the resistance of paper and paper board to bending. The economic value of paperboard highly depends upon its bending resistance or stiffness. This is a Taber T more...

• MOQ : 1 piece
• Measuring Range : up to 5000 mN
• Mains Supply : 220 Volts ±10%, 50 Cycles (if Not Otherwise Specified in Your Order and Acknowledge By Us)
• Clamp Pressure : 3.0 Kg.
• Brand Name : Advancetech
• Bending Angle : Adjustable 5 to 30 Degrees Six Fixed Position 7,5 15 20 25 and 30 Degrees
• Display : Led Display
• Bending Length  : Seven Fixed Bending Lengths 5 10,15,20,25 & 50 Mm
• Power Requirement : Capacity 500 Watt
• Load Sensor  : 300.0 Gm

Digital Stiffness Tester Are manufactured With High-quality Material. The tester are equipped with for results reading according to TAPPI T 556 and SCAN-P 29 in mN to mNm/ The calculation of this specific bending stiffness and its calibration by using the stiffness tester is based on the standard DIN 53 121 & more...

• Brand Name : Advancetech

Abrading instrument, consisting of a horizontal turntable with a center clamp, which revolves at 70 to 75 rpm, upon which the specimen is attached, and two weighte parallel arms, each carrying a special abrasive embedded rubber whell, freely rotating on a ball-bearing horizontal spindle, and each resting on t more...

• Brand Name : Advancetech

We Supply Taber Stiffness Tester All Across india. These Machines Are manufactured With High-quality Material. Advancetech Stiffness tester (taber type) is used to evaluate stiffness and resiliency properties of materials up to 10, 000 Taber Stiffness Units. This precision instrument provides accurate test me more...

• MOQ : 1 Piece
• Application : Laboratory
• Weight : 4-6kg
• Driven Type : Pneumatic
• Automatic Grade : Manual
• Type : Portable
• Warranty : 1 Year

more...

• Weight : 20 kg
• Shape : Round
• Material : Stainless Steel
• Supply Type : Manufacturer
• Type : Hydraulic Cutters

more...

• MOQ : 1 Piece
• Type : Hydraulic Cutters
• Supply Type : Manufacturer
• Warranty : 1 year
• Brand Name : PAP-TECH
• Material : Black Metal,Metal
• Color : Black-grey
• Size : 16inch,100 cm 2

The Hydraulic GSM Round Cutter is a versatile and reliable instrument designed for precise cutting of round samples from materials such as paper, board, fabric, woven and non-woven textiles. It facilitates accurate measurement of grammage (GSM – grams per square meter) through its precision-engineered d more...

• Supply Type : Manufacturer
• Brand Name : PAP-TECH
• Model Name/Number : PAP-2057-B
• Condition : New
• Country of Origin : India
• Body Material : Stainless steel
• Cut Size : 1.5x2.75 Inch
• Model No : PAP-2057 B

Triple Shear Cutter The Triple Shear Cutter is a precision tool designed for preparing test samples for evaluating the stiffness characteristics of paper or board. This cutter is specifically engineered to ensure accurate sample preparation, which is critical for reliable stiffness testing. Key Features: Prec more...

• Dimension : 5X5X6
• Material : Stainless Steel
• Punch : Special Steel
• Automation Grade : Manual
• Volume : 0.01 m3
• Color : Black-grey
• Weight : Up to 3 kg
• Usage/Application : Paper Cutting
• Supply Type : Manufacturer
• Brand Name : PAP-TECH

The  Manual GSM Round Sample Cutter  is a precise and durable tool designed for cutting round samples of paper or board. Its features, including a sharp blade, manual operation, adjustable diameter settings, and robust construction, ensure that samples are accurately prepared for GSM testing. This t more...

• Frequency : 45Hz, 66Hz
• Temperature Capacity : High Temperature, Low Temperature, Medium Temperature
• Power Source : Electric
• Feature : Easy To Use, Electrical Porcelain, Four Times Stronger
• Automatic Grade : Fully Automatic
• Application : Industrial Use

We are a leading Manufacturer, Exporter & Supplier of Pilling Tester . It is manufactured making use of supreme quality of raw materials. We make it available in different specifications at request of customers. The dimensional accuracy, precise design and easy operability of Pilling Tester make it suitab more...

• Display Type : Analog
• Voltage : 110V, 220V
• Application : Industrial, Laboratory
• Material : Stainless Steel
• Shape : Rectangular
• Rated Power : 100W, 200W
• Power Source : Electric
• Feature : Durable, High Accuracy, Light Weight

Being a distinguished Manufacturer, Exporter & Supplier of Crock Meter , we attempt to accomplish 100% customer satisfaction. Our wide range is manufactured using first-rate raw material. We meet the highest standards and parameters of quality set by the industry. Designs are made keeping different specif more...

• Automation Grade : Semi Automatic
• Feature : Durable, High Accuracy, Low Maintainance
• Application : Industrial Use
• Weight : 10-50kg
• Power : 1-3kw, 3-6kw
• Voltage : 110V, 220V

Holding years of expertise in the industry, we, as a Manufacturer, Exporter & Supplier, offer Martindale Abrasion Cum Pilling Tester . We manufacture the best quality thanks to our skilled professionals, sophisticated technology and latest machines. 4 Heads is used to check the abrasion as well as pilling more...

• MOQ : 888 Piece
• Blade Material : SS 202
• Capacity : 250ML
• Material : ABS
• Supply Type : Manufacturer
• Country of Origin : India
• Application : Kitchen
• Brand Name : Ambition

more...

• Automatic Grade : Manual
• Color : Silver, Green
• Shape : Round
• Supply Type : Manufacturer
• Brand Name : Ambition
• Country of Origin : India
• Material : Stainless Steel
• Blade Material : Steel

more...

• Shape : Round
• Blade Material : S.S 202
• Automatic Grade : Manual
• Country of Origin : India
• Supply Type : Manufacturer
• Application : Chilly Cutter
• Brand Name : Ambition
• Color : Silver

more...

• MOQ : 1 Piece
• Supply Type : Manufacturer
• Country of Origin : India
• Voltage : 220V
• Automatic Grade : Automatic
• Driven Type : Electric
• Phase : Single Phase

more...

• Supply Type : Manufacturer
• Warranty : 1 Year
• Voltage : 220V
• Country of Origin : India
• Application : Laboratory
• Driven Type : Electric

more...

• Surface Finishing : Polished
• Supply Type : Manufacturer
• Country of Origin : India
• Application : Laboratory
• Shape : Round
• Driven Type : Hydraulic
• Warranty : 1 Year

more...