Applications:
Domestic and municipal water supply Firefighting systemRural water supply Industrial and mining applicationSprinkler system FountainsPressure boosting units Gardens

• Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
• More durability and hygiene
• High operating efficiency
• Specially designed thrust bearing to withstand high axial thrust load
• Extremely hardwearing water lubricated bearing
• Thread type motor construction ensures service feasibility
• Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
• Designed for wide voltage operation
• Best alternative for JET & Compressor pump set
• Additional intermediate bearing in higher stage pumps.

FALCON FSV series Submersible Borewell pump is suitable for open wells. Made with world class technology and crafted with advanced design, the FSV series is class apart.

• Available in Single Phase 3.0 HP to 5.0 HP (2.2Kw to 3.7Kw) & Three Phase 3.0 HP to 15.0 HP (2.2Kw to 11Kw)
• Head Range 80 to 380 feet. (Up to 114 Meters)
• Flow Range 72 M3/Hour (1200 Lpm)
• Flawless and maintenance free performance even in very low voltage - 180V In Single Phases and 250V In Three Phases.
• Saves electricity by 20% - 30% compared to conventional designed pumps.
• Less maintenance due to safe designs & high precise work.
• Negligible Chances of motor burning due to Low Current density, efficiency & safely designed motor.
• AISI 410 S.S. Grade induction Casting Pump Impellers.
• AISI 304 S.S. Grade Investment casting non-magnetic pump bowls.
• Pure AISI 304/431 S.S. grade motor shaft.
• Pure AISI 202 S.S. Grade stator shell.
• 100% pure EC Grade copper employed to make winding wire, dual coated with insulation Class-B.
• Stamping: M-45 Grade Silicon and Low Carbon.
• Base, Housing Bracket is of casing C.I. FG-250 Grade.
• Thrust assembly S.S.-410 and Carbon with AISI 304 S.S. Grade tilting pad.
• Best Quality and High Thickness LTB -4 Bush.
• SAND PROOF design of mechanical seal rings and Sand Guards protection.
• Usage: Domestic & Gardening, Industrial & Agricultural.

FALCON DSV (Domestic Vertical Openwell) Submersible Borewell pump suitable for open wells, made with superior quality raw material, unique design to ensure best in-class performance with lowest operating cost and zero maintenance for years. Matchless and unique hydraulic design of pump volute chamber, bowl and impeller put together construct the pump most energy efficient. Highly sophisticated engineering and State of the art manufacturing process results the world class quality and its consistency.

• Available in Single Phase & Three Phase 1.0 HP to 3.0 HP (0.75 Kw to 2.2 Kw)
• Head Range 80 to 240 feet. (Upto 72 Mtrs)
• Flow Range 24 M3/Hour (400 LPM)
• Flawless and maintenance free performance even in very low voltage 180V In Single Phases and 250V In Three Phases.
• Saves electricity more by 20% to 30% in comparison to conventionally designed pumps.
• Less maintenance due to safe designs & high precision work.
• Negligible Chances of motor burning due to low current density, efficient & safely designed motor.
• AISI 410 S.S. Grade induction Casting Pump Impellers.
• Pure AISI 304/431 S.S. grade motor shaft.
• 100% pure EC Grade copper employed to make winding wire, dual coated with insulation Class-B.
• High Quality AISI 202 S.S. Grade Stator shell.
• Stamping: M-45 Grade Silicon and Low Carbon.
• Base, Housing Bracket, Casing C.I. FG-250 Grade.
• Thrust assembly S.S.-410 and Carbon with AISI 304 S.S. Grade tilting pad.
• Best Quality and High Thickness LTB -4 Bush.
• SAND PROOF design of mechanical seal rings and Sand Guards protection.
• Usage: Domestic & Gardening, Industrial & Agricultural.

MOTOR BODY : Graded Cast Iron

STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt

ROTOR SHAFT : Stainless Steel 420 H&T

IMPELLER : Graded Cast Iron and Dynamically Balanced

BALL BEARING : Reputed Make ZZ Ball Bearing

SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal

WINDING : Super enameled EC Grade Copper Wire

• Domestic
• Fountain
• High Rise Building
• Construction
• Agriculture
• Drip & Sprinkler Irrigation
• Irrigation
• Water Circulation
• Rural Water Supply Schemes
• Industrial Water Supply
• Process House
• Booster Application
• High operating efficiency resulting in lower power consumption
• Good suction lift characteristics
• Dynamically balanced rotating parts including rotor & impeller
• Balanced and rigid construction
• Squirrel Cage Induction type totally enclosed Motor (TEFC).
• Single Phase with running Capacitor.
• It also works on Low Voltage.
• Easy installation and easy Servicing.

MOTOR BODY : Graded Cast Iron

STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt

ROTOR SHAFT : Stainless Steel 420 H&T

IMPELLER : Graded Cast Iron and Dynamically Balanced

BALL BEARING : Reputed Make ZZ Ball Bearing

SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal

WINDING : Super enameled EC Grade Copper Wire

• Domestic
• Fountain
• High Rise Building
• Construction
• Agriculture
• Drip & Sprinkler Irrigation
• Irrigation
• Water Circulation
• Rural Water Supply Schemes
• Industrial Water Supply
• Process House
• Booster Application
• High operating efficiency resulting in lower power consumption
• Good suction lift characteristics
• Dynamically balanced rotating parts including rotor & impeller
• Balanced and rigid construction

• Squirrel Cage Induction type totally enclosed Motor (TEFC).
• Single Phase with running Capacitor.
• It also works on Low Voltage.
• Easy installation and easy Servicing.

• Robust Construction
• Powder Coated Deep Drawn Sheet Metal box.
• 4 pole Contactor.
• Wide Brand voltage Range.
• Variable Overload Relay Ranging from 6-10 A to 13-22 A.
• Easy Customer termination.
• Easy for maintenance.

• Robus Construction.
• Powder Coated Sheet Metal Box.
• Heavy duty Start Capacitor for starting torque.
• Heavy duty Run capacitor with connector for easy replacement.
• Special purpose Contactor for Motor Switching.
• Heavy duty protector (OLP) for overload protection available in DR series.
• Heavy duty , 5 Way connector strip for customer connections.
• Accurate Digital VA meter
• Easy customer termination.
• Easy for maintenance.
• A site settable, current sensing type dry run preventer protects pump from dry run
• Set dry run current as 80 to 90% of its running current.
• Reset button is available

• Category : SD-Series
• H.P.Range:7.5 to 17.5 H.P.(Three Phase)
• Robust Construction
• Powder Coated Deep Drawn Metal box.
• 4 pole Contactor
• Wide Band range.
• Variable Overload Relay Ranging from 9-14 A to 13-22 A
• Easy customer termination.
• Easy for maintenance.

• Robust Construction
• Powder Coated Sheet Metal box.
• Heavy duty protector(OLP) for overload protection available in MO series.
• Single Phase MCB for Short Circuit Protection
• Ammeter available in MO series
• Heavy Duty , 5 way connector strip for customer connections.
• Easy Customer termination.
• Heavy duty Run capacitor with connector for easy replacement.
• Easy for maintenance.
• Reset button is available.

Applications:
Domestic and municipal water supply Firefighting systemRural water supply Industrial and mining applicationSprinkler system FountainsPressure boosting units Gardens

• Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
• More durability and hygiene
• High operating efficiency
• Specially designed thrust bearing to withstand high axial thrust load
• Extremely hardwearing water lubricated bearing
• Thread type motor construction ensures service feasibility
• Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
• Designed for wide voltage operation
• Best alternative for JET & Compressor pump set
• Additional intermediate bearing in higher stage pumps.

FALCON FSV series Submersible Borewell pump is suitable for open wells. Made with world class technology and crafted with advanced design, the FSV series is class apart.

• Available in Single Phase 3.0 HP to 5.0 HP (2.2Kw to 3.7Kw) & Three Phase 3.0 HP to 15.0 HP (2.2Kw to 11Kw)
• Head Range 80 to 380 feet. (Up to 114 Meters)
• Flow Range 72 M3/Hour (1200 Lpm)
• Flawless and maintenance free performance even in very low voltage - 180V In Single Phases and 250V In Three Phases.
• Saves electricity by 20% - 30% compared to conventional designed pumps.
• Less maintenance due to safe designs & high precise work.
• Negligible Chances of motor burning due to Low Current density, efficiency & safely designed motor.
• AISI 410 S.S. Grade induction Casting Pump Impellers.
• AISI 304 S.S. Grade Investment casting non-magnetic pump bowls.
• Pure AISI 304/431 S.S. grade motor shaft.
• Pure AISI 202 S.S. Grade stator shell.
• 100% pure EC Grade copper employed to make winding wire, dual coated with insulation Class-B.
• Stamping: M-45 Grade Silicon and Low Carbon.
• Base, Housing Bracket is of casing C.I. FG-250 Grade.
• Thrust assembly S.S.-410 and Carbon with AISI 304 S.S. Grade tilting pad.
• Best Quality and High Thickness LTB -4 Bush.
• SAND PROOF design of mechanical seal rings and Sand Guards protection.
• Usage: Domestic & Gardening, Industrial & Agricultural.

FALCON DSV (Domestic Vertical Openwell) Submersible Borewell pump suitable for open wells, made with superior quality raw material, unique design to ensure best in-class performance with lowest operating cost and zero maintenance for years. Matchless and unique hydraulic design of pump volute chamber, bowl and impeller put together construct the pump most energy efficient. Highly sophisticated engineering and State of the art manufacturing process results the world class quality and its consistency.

• Available in Single Phase & Three Phase 1.0 HP to 3.0 HP (0.75 Kw to 2.2 Kw)
• Head Range 80 to 240 feet. (Upto 72 Mtrs)
• Flow Range 24 M3/Hour (400 LPM)
• Flawless and maintenance free performance even in very low voltage 180V In Single Phases and 250V In Three Phases.
• Saves electricity more by 20% to 30% in comparison to conventionally designed pumps.
• Less maintenance due to safe designs & high precision work.
• Negligible Chances of motor burning due to low current density, efficient & safely designed motor.
• AISI 410 S.S. Grade induction Casting Pump Impellers.
• Pure AISI 304/431 S.S. grade motor shaft.
• 100% pure EC Grade copper employed to make winding wire, dual coated with insulation Class-B.
• High Quality AISI 202 S.S. Grade Stator shell.
• Stamping: M-45 Grade Silicon and Low Carbon.
• Base, Housing Bracket, Casing C.I. FG-250 Grade.
• Thrust assembly S.S.-410 and Carbon with AISI 304 S.S. Grade tilting pad.
• Best Quality and High Thickness LTB -4 Bush.
• SAND PROOF design of mechanical seal rings and Sand Guards protection.
• Usage: Domestic & Gardening, Industrial & Agricultural.

MOTOR BODY : Graded Cast Iron

STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt

ROTOR SHAFT : Stainless Steel 420 H&T

IMPELLER : Graded Cast Iron and Dynamically Balanced

BALL BEARING : Reputed Make ZZ Ball Bearing

SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal

WINDING : Super enameled EC Grade Copper Wire

• Domestic
• Fountain
• High Rise Building
• Construction
• Agriculture
• Drip & Sprinkler Irrigation
• Irrigation
• Water Circulation
• Rural Water Supply Schemes
• Industrial Water Supply
• Process House
• Booster Application
• High operating efficiency resulting in lower power consumption
• Good suction lift characteristics
• Dynamically balanced rotating parts including rotor & impeller
• Balanced and rigid construction
• Squirrel Cage Induction type totally enclosed Motor (TEFC).
• Single Phase with running Capacitor.
• It also works on Low Voltage.
• Easy installation and easy Servicing.

MOTOR BODY : Graded Cast Iron

STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt

ROTOR SHAFT : Stainless Steel 420 H&T

IMPELLER : Graded Cast Iron and Dynamically Balanced

BALL BEARING : Reputed Make ZZ Ball Bearing

SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal

WINDING : Super enameled EC Grade Copper Wire

• Domestic
• Fountain
• High Rise Building
• Construction
• Agriculture
• Drip & Sprinkler Irrigation
• Irrigation
• Water Circulation
• Rural Water Supply Schemes
• Industrial Water Supply
• Process House
• Booster Application
• High operating efficiency resulting in lower power consumption
• Good suction lift characteristics
• Dynamically balanced rotating parts including rotor & impeller
• Balanced and rigid construction

• Squirrel Cage Induction type totally enclosed Motor (TEFC).
• Single Phase with running Capacitor.
• It also works on Low Voltage.
• Easy installation and easy Servicing.

• Robust Construction
• Powder Coated Deep Drawn Sheet Metal box.
• 4 pole Contactor.
• Wide Brand voltage Range.
• Variable Overload Relay Ranging from 6-10 A to 13-22 A.
• Easy Customer termination.
• Easy for maintenance.

• Robus Construction.
• Powder Coated Sheet Metal Box.
• Heavy duty Start Capacitor for starting torque.
• Heavy duty Run capacitor with connector for easy replacement.
• Special purpose Contactor for Motor Switching.
• Heavy duty protector (OLP) for overload protection available in DR series.
• Heavy duty , 5 Way connector strip for customer connections.
• Accurate Digital VA meter
• Easy customer termination.
• Easy for maintenance.
• A site settable, current sensing type dry run preventer protects pump from dry run
• Set dry run current as 80 to 90% of its running current.
• Reset button is available

• Category : SD-Series
• H.P.Range:7.5 to 17.5 H.P.(Three Phase)
• Robust Construction
• Powder Coated Deep Drawn Metal box.
• 4 pole Contactor
• Wide Band range.
• Variable Overload Relay Ranging from 9-14 A to 13-22 A
• Easy customer termination.
• Easy for maintenance.

• Robust Construction
• Powder Coated Sheet Metal box.
• Heavy duty protector(OLP) for overload protection available in MO series.
• Single Phase MCB for Short Circuit Protection
• Ammeter available in MO series
• Heavy Duty , 5 way connector strip for customer connections.
• Easy Customer termination.
• Heavy duty Run capacitor with connector for easy replacement.
• Easy for maintenance.
• Reset button is available.