Falcon Magnetics

Odhav, Ahmedabad, Gujarat

The alnico are powerful permanent magnets which are made primarily from aluminum, nickel, cobalt, copper, iron and sometimes titanium. Alnico magnets in two varieties that is cast and sintered.Alnico magnets finds the applications in the following industries: Motors, Sensors, Loudspeakers, Electronic sensors, Magnetron.

Bore Well Magnets is a cylindrical magnet having a hook on one side and magneticpower on the other side. it is capable of lifting from 10kg. to 5ookg. depending upon the size of the magnets. it is available from 50 mmdia to 150 mm dia and in different lengths. bore well magnets may also be manufactured as per customers requirement.

Rare earth magnets are strong permanent magnets. As they are stronger than ferrite or alnico magnets, the magnetic field produced by them are also higher.Neodymium Rare Earth magnets offer high energy and holding power in compact sizes and light weights.

Some of the common applications of the rare earth magnets are :They are used in computer hard drives, high-end speakers, study of magnetic field dynamics.Rare elements find their application in glass, ceramic, lighting, and metallurgical industries.

Special manufactures permanent ferrite.Ferrite MagnetSpecial manufactures permanent ferrite.Ferrite Magnets are available in the following shapes: Cylindrical, Block , Ring Magnets.s are available in the following shapes: Cylindrical, Block , Ring Magnets.

The high surface strength of magnetic plates makes them ideally suited for sloping chute applications, removing damaged metal and ferrous contaminants. these low-cost, permanent plate magnets are widely used in many industries including food, grain, chemicals, plastics, lextiles, cosmetics, minerals and pharmaceuticals. higher strength models can be used to separate ferrous metals from fibrous, viscous, or liquid marerial. althrough magnetic plates are idea for many applications. they can be installed only in restangular separators desribed below have plate magnets mounted in housings. they are used to clean highway shoulders.

Lifting Magnets are made from high coercivity magnets for extra durability and rough daily usage. its tremendous gripping power makes it a very useful tool for recovering ferrous objects from deep tanks or wells of chemical, ceramic or electroplating plants. its' light weight makes it a handy tool which can be used in ferreous foundries to recover iron pellets from ore and sand affecting considerable saving. it recovers its cost within a matter of weeks. very useful for foundries , plastics and lot of other industries.

Hopper magnets provide an efficient magnetic filtering to any hopper-fed injection moulding, blow moulding or extruding equipment. Made up of high coercivity permanent magnets sealed in non magnetic tubes, they provide better magnetic filtring due to their high magnetic flux density. They are designed to fit in to any size of hopper. Easy to clean and no maintenance cost. makes it really constant magnetic protection at a low cost to your equipment and preventing expensive shut down and delays. A part from these sizes we make custom made hopper magnets of any shapes and sizes. Hopper magnet should be fitted in Hoper about 100 to 150 mm above the neck(bottom) of the hopper.

Power magnet made from high coercivity magnetic material are fabricated in stainless steel. A hole in the flat side facilities its fixing in position. A handle can also be fixed in the hole for the operation. These powerful magnets are very useful in seperating iron from non ferrous turning, arresting tramp iron before it goes into the machine and damages it such as cattle feed pellet making machine, removing iron impurities from slurry in ceramic industry and in many places.

For liquid/slurry materials.T-Trap magnetic separators for heavy are designed for heavy duty large volume liquid and semi liquid line flow systems. the T-trap employs a slip -in cage if stainless steel permanent magnet tubes. the function of the magnet tubes is such that the captured tramp metal particles migrate to the rear of the tubes where they remain protected from wash-off until the tubes are cleaned. the magnet cage has positioning lugs that mate with locating recesses in the body of the T-TRap preventing rotation as fluid flows through the trap. having a top access bolt-on steel plate and seal, the T-Trap is easy to clean. with the top the magnet cage is simply lifted out, wiped clean and reinstalled. available in 7 standard line sizes from 1 to 18 inches in diameter.

A Unique permanent , Magnetic Equipment to remove tramp iron pieces from gravity flow or penumatically machinery from damages. A must for cattle feed fertilisers plant and food processing or grain handling units Made from high coercivity permanent magnets, the two powerful magnetic plates hinged on sturdy, M.S. Housing arrest all particles from the material and prevent damage to the machinery. Note:Custom made Humps to suit any special requirements can be supplied.

The drawers have magnet tubes on alternate centres to force a zigzag material movement between the tubes. maximum tramp metal capture is achieved as material flows through the housing. the pull out drawers provide for fast efficient cleaning of the captured tramp metal the body of the housing is constructd of stainless steel and is designed to fit the mating chute, spout, tube or line in which the housing is to be used.