Powders containing the drug formulation and excipients are compressed together by stamping machines called presses. These presses may also sometimes be called as compression machines or tablet presses. The powdered form of the drug is metered into a cavity that is formed with two punches and a die. The punches presses together to fuse together the materials and form the solid tablet form.

Salient Features: Sturdy and noiseless design. Easy to operate & maintain. Higher ratio of desired size granules can be obtained Continuous oscillating stirrer drive. Simple screen holding and tensioning device.

ACVF Drive for both feeder Motor Twin Shaft Feeder Screw Twin Water Jacketed System with gear box Operating Panel with PLC & HMI Variable Frequency Drive for Roller

Salient Features:- Beast I Roll Compactor Manufacturer & Exporter

• Best I Roll Compactor compliant fulfills the complete cGMP norms.
• Very compact design available in Plain, Water Jacketed or Flameproof Model.
• Screw is driven through gear motor.
• Rolls drive through twins shaft gearbox with speed drive unit coupled to it using coupling, which ensures synchronization of the rolls with a steady torque loading.
• Pre-densifier screw comprises of cylindrical or conical shape, which is well polished and made of AISI SS-304 quality material SS 316 optional.
• Compacting rolls sleeves are made out of tool steel, hardened to 55 HRC approximately, and are keyed in to shafts and thus protected against axial slipping by thrust plates and bolts.
• The feed screw assembly can be lifted by hand-operated hydraulic pump. This facilitates ease in cleaning.
• Scrapper assembly also designed to dismantle for ease of cleaning.
• Pre-compression chamber guides the powder without any slippage or leakage.
• A separate panel board which consist all controls and indicators of the roll compactor are permanently built in namely, on/off rolls, on/off feed screw, main switch, forward/reverse switch, ammeters for rolls and feed screw and emergency stop to avoid short circuit or fire hazard at the time of cleaning with water.

Beast I - Roll Compactor Machine

Roll Compactor Machine Roll size 2.5 (W.J. - GMP Model)

(5.5ft Height)

Including

• ACVF Drive for both feeder Motor
• Twin Shaft Feeder Screw
• Twin Water Jacketed System with gear box
• Operating Panel with PLC & HMI
• Variable Frequency Drive for Roller

Optional Feature :

• Adjustable Roll Arrangement
• Vacuum Desecration
• Vacuum Powder Transfer System
• Online granulator

Salient Features:Inspection on both sides of Tablet. As per cGMP Standard. Reversible of Tablet. Foot switch provided on both side for stopping the machine. Vibration provided for removing of Dust. The unit is mounted on caster wheel. 0.25 HP Three phase motor.

acvf drive for both feeder motor twin shaft feeder screw twin water jacketed system with gear box operating panel with plc & hmi variable frequency drive for roller

salient features:- beast I roll compactor manufacturer & exporter

• best I roll compactor compliant fulfills the complete cgmp norms.
• very compact design available in plain, water jacketed or flameproof model.
• screw is driven through gear motor.
• rolls drive through twins shaft gearbox with speed drive unit coupled to it using coupling, which ensures synchronization of the rolls with a steady torque loading.
• pre-densifier screw comprises of cylindrical or conical shape, which is well polished and made of aisi ss-304 quality material ss 316 optional.
• compacting rolls sleeves are made out of tool steel, hardened to 55 hrc approximately, and are keyed in to shafts and thus protected against axial slipping by thrust plates and bolts.
• the feed screw assembly can be lifted by hand-operated hydraulic pump. This facilitates ease in cleaning.
• scrapper assembly also designed to dismantle for ease of cleaning.
• pre-compression chamber guides the powder without any slippage or leakage.
• a separate panel board which consist all controls and indicators of the roll compactor are permanently built in namely, on/off rolls, on/off feed screw, main switch, forward/reverse switch, ammeters for rolls and feed screw and emergency stop to avoid short circuit or fire hazard at the time of cleaning with water.

roll compactor machine roll size 2.5 (w.j. - gmp model)

(5.5ft height)

including

• acvf drive for both feeder motor
• twin shaft feeder screw
• twin water jacketed system with gear box
• operating panel with plc & hmi
• variable frequency drive for roller

optional feature :

• adjustable roll arrangement
• vacuum desecration
• vacuum powder transfer system
• online granulator

Salient Features: Designed for continuous wet or dry granulation. Beaters & scraper blades made of SS 304 (SS 316 Optional) Easy to dismantle and clean Beater drive equipped with reversible switch. Castor wheels provided for mobility. Flameproof electrical components can be provided at extra cwt

We are the main supplier of this product.

We are the main supplier of this product.

Powders containing the drug formulation and excipients are compressed together by stamping machines called presses. These presses may also sometimes be called as compression machines or tablet presses. The powdered form of the drug is metered into a cavity that is formed with two punches and a die. The punches presses together to fuse together the materials and form the solid tablet form.

Salient Features: Sturdy and noiseless design. Easy to operate & maintain. Higher ratio of desired size granules can be obtained Continuous oscillating stirrer drive. Simple screen holding and tensioning device.

ACVF Drive for both feeder Motor Twin Shaft Feeder Screw Twin Water Jacketed System with gear box Operating Panel with PLC & HMI Variable Frequency Drive for Roller

Salient Features:- Beast I Roll Compactor Manufacturer & Exporter

• Best I Roll Compactor compliant fulfills the complete cGMP norms.
• Very compact design available in Plain, Water Jacketed or Flameproof Model.
• Screw is driven through gear motor.
• Rolls drive through twins shaft gearbox with speed drive unit coupled to it using coupling, which ensures synchronization of the rolls with a steady torque loading.
• Pre-densifier screw comprises of cylindrical or conical shape, which is well polished and made of AISI SS-304 quality material SS 316 optional.
• Compacting rolls sleeves are made out of tool steel, hardened to 55 HRC approximately, and are keyed in to shafts and thus protected against axial slipping by thrust plates and bolts.
• The feed screw assembly can be lifted by hand-operated hydraulic pump. This facilitates ease in cleaning.
• Scrapper assembly also designed to dismantle for ease of cleaning.
• Pre-compression chamber guides the powder without any slippage or leakage.
• A separate panel board which consist all controls and indicators of the roll compactor are permanently built in namely, on/off rolls, on/off feed screw, main switch, forward/reverse switch, ammeters for rolls and feed screw and emergency stop to avoid short circuit or fire hazard at the time of cleaning with water.

Beast I - Roll Compactor Machine

Roll Compactor Machine Roll size 2.5 (W.J. - GMP Model)

(5.5ft Height)

Including

• ACVF Drive for both feeder Motor
• Twin Shaft Feeder Screw
• Twin Water Jacketed System with gear box
• Operating Panel with PLC & HMI
• Variable Frequency Drive for Roller

Optional Feature :

• Adjustable Roll Arrangement
• Vacuum Desecration
• Vacuum Powder Transfer System
• Online granulator

Salient Features:Inspection on both sides of Tablet. As per cGMP Standard. Reversible of Tablet. Foot switch provided on both side for stopping the machine. Vibration provided for removing of Dust. The unit is mounted on caster wheel. 0.25 HP Three phase motor.

acvf drive for both feeder motor twin shaft feeder screw twin water jacketed system with gear box operating panel with plc & hmi variable frequency drive for roller

salient features:- beast I roll compactor manufacturer & exporter

• best I roll compactor compliant fulfills the complete cgmp norms.
• very compact design available in plain, water jacketed or flameproof model.
• screw is driven through gear motor.
• rolls drive through twins shaft gearbox with speed drive unit coupled to it using coupling, which ensures synchronization of the rolls with a steady torque loading.
• pre-densifier screw comprises of cylindrical or conical shape, which is well polished and made of aisi ss-304 quality material ss 316 optional.
• compacting rolls sleeves are made out of tool steel, hardened to 55 hrc approximately, and are keyed in to shafts and thus protected against axial slipping by thrust plates and bolts.
• the feed screw assembly can be lifted by hand-operated hydraulic pump. This facilitates ease in cleaning.
• scrapper assembly also designed to dismantle for ease of cleaning.
• pre-compression chamber guides the powder without any slippage or leakage.
• a separate panel board which consist all controls and indicators of the roll compactor are permanently built in namely, on/off rolls, on/off feed screw, main switch, forward/reverse switch, ammeters for rolls and feed screw and emergency stop to avoid short circuit or fire hazard at the time of cleaning with water.

roll compactor machine roll size 2.5 (w.j. - gmp model)

(5.5ft height)

including

• acvf drive for both feeder motor
• twin shaft feeder screw
• twin water jacketed system with gear box
• operating panel with plc & hmi
• variable frequency drive for roller

optional feature :

• adjustable roll arrangement
• vacuum desecration
• vacuum powder transfer system
• online granulator

Salient Features: Designed for continuous wet or dry granulation. Beaters & scraper blades made of SS 304 (SS 316 Optional) Easy to dismantle and clean Beater drive equipped with reversible switch. Castor wheels provided for mobility. Flameproof electrical components can be provided at extra cwt

We are the main supplier of this product.

We are the main supplier of this product.