Locking Assembly is mainly used in all kinds of shafts for solving the locking requirement in the applications where it is to be utilized. The locking assembly provided by Falcon is available in different transmission rate, diameter of the shaft and the axial displacement. There are various locking assembly types depending on the usage. The locking assembly, we manufacture does not require any special kind of fitting work in order to attach it to the shaft. There is no axial movement of mounted component during installation. The locking assembly is in the single and double taper and is even available in compact design for smaller shaft diameter.

Clamping sleeve consists of a cylindrical designed like a spring diaphragm that serves as a clamping column in the machine parts. The clamping sleeves we offer consist of o-ring seals and back-up rings provided at both the side of the end. The type of clamping sleeve is decided based on the system of the diaphragm that is present in the applications. Even the execution of the working of clamping sleeve changes from case to case where it is attached. The clamping sleeve should be able to transmit forces efficiently and open and close at high speed.

Locking element is special component used in shafts to transmit the torque to-and-from the shaft in various ways according to the application. The locking element consists of internal and external tapered ring. Some applications also stack the elements to get greater torques. As locking element manufacturer, we provide them in various dimensions as per the industry set standards. The element is composed of two different halves, one is joined through bolts and other has a slit for contraction.

Universal joint is also called the U-joint. This type of joint is used to connect the rods whose axes are inclined at some angle with each other. The hinges that are joined with each other have an angle of 90 between each other. The typical applications of these universal joints are in the control mechanism, instrumentation, radio, aircraft, textile machinery, etc. The construction of this joint has two yokes one on each of the shaft and the cross shaped part called as spider. This spider in the universal joint is important as it connects both the shafts and effectively transfers the torque.

Cardan shaft is a mechanical element used to transmit the torque or rotation in the devices that cannot be connected to each other directly. In order to transmit the torque to other device the shaft needs to be strong and must be able to bear the stress exerted on it. We are engaged in providing a comprehensive range of cardan shaft that satisfies the need of the client and industries. They are manufactured under the expert professional guidance and following the international standards to fit the mechanical devices all around the world.

Carden shaft coupling is used for absorbing the vibration and other forces in the carden shaft in the machineries. They are designed for utilization in the engines that are directly connected to the shaft. The deflection of the cardan shaft is permitted up to some angle, but is even extended up to some extent at the request of the client. They are used in various types of applications like cooling towers, pumps, mills, etc. The carden shaft coupling are renowned among the clients for the high amount of flexibility of the rubber couplings.

We are leading manufacturer and supplier of locking assemblies in various different sizes depending on the machine in which it is to be used. They are used in pulleys, gears, shaft, hub and other industrial appliances. They provide a reliable connection to lock the clamp load to contract the pressure that is exerted on both the shaft as well as the bore in the element. The locking assembly we provide consists of four pieces and having two inside double-cone rings. These rings are tightened by the means of screws.

Shrink Discs are used in shaft connections where the torque is to be transmitted through the connection between the two shafts. The way in which the shaft disc is connected also very important in the working and efficiency of the disc. They provide great options to connect the male shaft to a hollow output shaft of a gearbox. The shrink discs are mainly used to mount around the shaft in the gearboxes. They are made from excellent quality materials to provide long lasting functionality and efficiency.

Shaft coupling are special mechanical devices to connect rotating shafts and remove the misalignments between them. These shaft couplings can be rigid as well as flexible depending on the use in the device. The coupling type depends on the alignment accuracy and the torque required. We offer these shaft couplings in many dimensions and specifications as per the machine in which it is to be used. The shaft coupling is mainly used in motors, compressors, generators, etc.

The rigid ring block is an important part in the mechanical devices for the stability of the frames. The stability of the block increases with the increase in the number of rings. We as a manufacturer of rigid ring block offer them in a wide range of specifications that are declared by the industries. Each component of the ring block is made in accordance to the international standard so that they can be used in domestic market and even meets the instruments in the global market when they are exported to the client. We ensure that they deliver a reliable performance to the clients. The rigid ring block comes in various dimension and specifications to meet the varying requirement of the application.

Locking Assembly is mainly used in all kinds of shafts for solving the locking requirement in the applications where it is to be utilized. The locking assembly provided by Falcon is available in different transmission rate, diameter of the shaft and the axial displacement. There are various locking assembly types depending on the usage. The locking assembly, we manufacture does not require any special kind of fitting work in order to attach it to the shaft. There is no axial movement of mounted component during installation. The locking assembly is in the single and double taper and is even available in compact design for smaller shaft diameter.

Clamping sleeve consists of a cylindrical designed like a spring diaphragm that serves as a clamping column in the machine parts. The clamping sleeves we offer consist of o-ring seals and back-up rings provided at both the side of the end. The type of clamping sleeve is decided based on the system of the diaphragm that is present in the applications. Even the execution of the working of clamping sleeve changes from case to case where it is attached. The clamping sleeve should be able to transmit forces efficiently and open and close at high speed.

Locking element is special component used in shafts to transmit the torque to-and-from the shaft in various ways according to the application. The locking element consists of internal and external tapered ring. Some applications also stack the elements to get greater torques. As locking element manufacturer, we provide them in various dimensions as per the industry set standards. The element is composed of two different halves, one is joined through bolts and other has a slit for contraction.

Universal joint is also called the U-joint. This type of joint is used to connect the rods whose axes are inclined at some angle with each other. The hinges that are joined with each other have an angle of 90 between each other. The typical applications of these universal joints are in the control mechanism, instrumentation, radio, aircraft, textile machinery, etc. The construction of this joint has two yokes one on each of the shaft and the cross shaped part called as spider. This spider in the universal joint is important as it connects both the shafts and effectively transfers the torque.

Cardan shaft is a mechanical element used to transmit the torque or rotation in the devices that cannot be connected to each other directly. In order to transmit the torque to other device the shaft needs to be strong and must be able to bear the stress exerted on it. We are engaged in providing a comprehensive range of cardan shaft that satisfies the need of the client and industries. They are manufactured under the expert professional guidance and following the international standards to fit the mechanical devices all around the world.

Carden shaft coupling is used for absorbing the vibration and other forces in the carden shaft in the machineries. They are designed for utilization in the engines that are directly connected to the shaft. The deflection of the cardan shaft is permitted up to some angle, but is even extended up to some extent at the request of the client. They are used in various types of applications like cooling towers, pumps, mills, etc. The carden shaft coupling are renowned among the clients for the high amount of flexibility of the rubber couplings.

We are leading manufacturer and supplier of locking assemblies in various different sizes depending on the machine in which it is to be used. They are used in pulleys, gears, shaft, hub and other industrial appliances. They provide a reliable connection to lock the clamp load to contract the pressure that is exerted on both the shaft as well as the bore in the element. The locking assembly we provide consists of four pieces and having two inside double-cone rings. These rings are tightened by the means of screws.

Shrink Discs are used in shaft connections where the torque is to be transmitted through the connection between the two shafts. The way in which the shaft disc is connected also very important in the working and efficiency of the disc. They provide great options to connect the male shaft to a hollow output shaft of a gearbox. The shrink discs are mainly used to mount around the shaft in the gearboxes. They are made from excellent quality materials to provide long lasting functionality and efficiency.

Shaft coupling are special mechanical devices to connect rotating shafts and remove the misalignments between them. These shaft couplings can be rigid as well as flexible depending on the use in the device. The coupling type depends on the alignment accuracy and the torque required. We offer these shaft couplings in many dimensions and specifications as per the machine in which it is to be used. The shaft coupling is mainly used in motors, compressors, generators, etc.

The rigid ring block is an important part in the mechanical devices for the stability of the frames. The stability of the block increases with the increase in the number of rings. We as a manufacturer of rigid ring block offer them in a wide range of specifications that are declared by the industries. Each component of the ring block is made in accordance to the international standard so that they can be used in domestic market and even meets the instruments in the global market when they are exported to the client. We ensure that they deliver a reliable performance to the clients. The rigid ring block comes in various dimension and specifications to meet the varying requirement of the application.