Post Buy Requirement
ES
Add Review

Our Products

  1. Oil Filters 4 Products available
  2. Machines And Equipments

    2 Products available
  3. Autoclaves

    1 Products available
  4. Oil And Lubricants

    1 Products available
  5. Separators & Strainers

    1 Products available
  6. Oil Production Plant

    1 Products available

Oil Filters

Leading Manufacturer, Supplier & Retailer of Transformer Oil Filtration Plant, Oil Filtration Plant, turbine oil filtration plant and Mobile Oil Filtration Plant.

Transformer Oil Filtration Plant

our oil filtration plants are used to remove impurities from transformer and switchgear oil such as moisture, dirt, air and other gases. This is a `low temperature and high vacuum` principle based equipment as per the international standards 6034 (1989) and its latest revision. We manufacture plants of variable capacities of 600 to 10000 lph which can be customized to special capacities if required by the clients. This plant takes the impure oil into the system through the inlet ball valve and then pumps it through by a positive displacement pump. A filter prior to this removes solid particles up to 1mm size and magnetic particles. After heating the oil up to 60c it passes throughthecartridge filters, where particles up to 5 microns are filtered. A specially designed vacuum chamber removes moisture, air and all the gases with the help of vacuum. The oil falls by way of gravity over the media inside forming a thin film of oil, exposing a larger surface area. The dissolved moisture and gases are evacuated and the oil is ready.

View Complete Details

Oil Filtration Plant

our filtration plants purify and upgrade transformer oil to comply with standard specifications. These plants can be designed as per customers specifications and are also available in varying capacities covering a whole range of applications in low, high and extra high voltage equipments. They perform the following functions:
removal of suspended impurities such as dust, rust, scales, colloidal carbon oxidation sludge etc. Up to < 1 micron.
degassing and dehydration of transformer oil with vacuum circulation of heated oil and filling of treated oil in transformer tank prevention of acid formation by evaporation and adsorption method
View Complete Details

Turbine Oil Filtration Plant

We manufacture Oil filtration plants with varying capacities ranging from500 LPH to 10000 LPH. These plants are available as single stage and double stage variants depending upon the volume of insulating oil o be filtered. If higher capacity plants are required by the clients we can customize our plants to fulfill their requirements. The plants are also designed as mobile units besides the regular stationary unit. For outdoor usage they are supplied with and enclosure. The plant treats the unqualified turbine oil and removes the impurities from it to improve its quality. It efficiently removes water, gas and other impurities especially from emulsified turbine oil.
Features:

  • Automatic systems with automatic advance system for safety, pressure, electricity and temperature constancy with infrared liquid-
  • Has a trapezoidal, spiral, automatic back flushing system.
  • Automatic Unmanned, On-line oil purification with turbine or water turbine
  • Breaks emulsification thoroughly with high- molecule polymeric material
  • Thoroughly clears the liquid water, free water and 80% dissolved water with effective dewatering with one and two step dehydration method
  • Distinctive technique removes impurities by filtering through double FH trapezoidal network and absorbing by high polymer material
  • Has the capacity to equal or surpass 200 and make the cleanness lower grade 6(NAS1638) with its advanced dielectric condensation devices.
This Vacuum Turbine Oil filter uses an advanced detaching theory of membrane which clears water and emulsification to purify the lubricant. The oil emulsifies to a much lesser degree after treatment. This TYA series prevent damage to the lubrication system and extends the life of both the insulating oil and the machinery.


View Complete Details

Mobile Oil Filtration Plant

During its operation of generating, transmitting and distributing power transformers give out heat which is absorbed by insulating oils. This oil has a tendency to absorb moisture from windings which leads to gradual deterioration of dielectric strength. Our filtration systems provide economical and efficient methods of purifying this lubricant. The unit consists of:
  • Filter Unit,
  • Indirect system of Oil Heating,
  • Vacuum Dehydration / degasification Unit
  • Condenser and condensate receiver
  • Feed and delivery pump
  • Piping & Valves
  • Control Panel
Components of Plant
The filter unit is a coarse strainer with a wire mesh filter element for retaining solid particles and a powerful magnet for retaining magnetic particles. It has round filter paper discs held under spring compression. Specially designed heaters with low watt density heat the auxiliary heating oil, which in turn heats the transformer oil maintaining a temperature of 70-80 C. The cylindrical external pressure vessel is fitted with various shallow drip trays and a specially designed spray pipe to increase surface area. The vapor from dehydration chamber is condensed in a condensate receiver of welded M. S. construction. There are feed and delivery pump of rotary gear type coupled directly with motors. Water Separator Collect the water produced. A centralized control panel has indicators for all electrical devices.
  • Imported thermostat
  • Thermometer for measuring temperature
  • Pressure & Vacuum gauges
  • Flow control indicator
  • Electronic Float Control
  • Electrical instruments, voltometers and ammeters
  • Electrical overloads and overload releases for safety of motors.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us