Post Buy Requirement
EE

Expert Energy System LLP Anand, Gujarat

Anand, Gujarat, India
Verified Add Review

Our Products

  1. Dryers 3 Products available
  2. Water Treatment & Purification Plant

    2 Products available
  3. Conveyors

    1 Products available
  4. Boiler And Boiler Parts

    1 Products available
  5. Boilers

    1 Products available
  6. Generators

    1 Products available
  7. Others Products 5 Products available

Dryers #4679096

Our Complete range of products are Rotary Dryer, spin flash dryers and conveyor dryers.

Rotary Dryer

The Rotary Dryers/Calcinators are mostly used in for free flowing powders and granular material and can operate with high through put, and if required can operate at high temperature also. They are sometime supplied with another rotary equipment to work as after cooler.

The rotary shall is made of steel which is mounted on heavy duty rollers and driven by gear box/geared motor. The variable drive is employed to control trough put. They are having counter or Co-current design. The specially designed internal flights lifts the material, showers it on drying gases, ensuring proper heat transfer, and help in forward movement of material through rotary drum. The main rotary shell is insulated from outside to reduce hot losses.

The hot is supplied from indirect or direct fried hot air generator, working on oil, gas or solid fuel fired.

The exhaust equipment consist of cyclone, beg filter and exhaust blower and some time a chimney is also supplied as optional.

The standard size starts from 300 mm to 1500 mm diameter and 5000 mm up to 15000 mm long

View Complete Details

Spin Flash Dryers

They are quick, efficient, continuous and less labour intensive. They can be used for drying wet cake/granular having up to 80% moisture but material should have charecrisitc of free following after drying.

STANDARD FEATURES

  • The material is feed in mixture, which disintegrates it into smaller lumps, which are then feed into drying chamber by variable feeder, driven by geared motor, having specially designed stirrer. The Hot Air enters the drying chamber and under high turbulence condition, drying process starts. The dried material travels upward in drying chamber under influence of process blower and is separated in cyclone and bag-filter.

  • The material of construction is M.S., S.S, and Aluminum depending upon process requirements.

  • The process air is heated by any of the option:- steam , thermic fluid , hot air generator, working on eighther oil, or gas or solid fuel f.

  • The drying capacity up to 800 kg/hr moisture removal rate is offered as standard equipments

View Complete Details

Conveyor Dryers

They are Generally employed for mass or volume production. The material to be treated(dried/backed) are loaded uniformly on conveyor, which carries the material through the heated tunnel and dried material is taken out at other end.
They are electrically heated or having finned tube heat exchanger working on steam or thermic fluid heater.
The stand alone hot air generator, direct fired or indirect fired is also offered. The excaust blower takes care of fumes generated during the process. The dedicated electronic/electrical control panel is designed for controlling production and drying parameters.
The material of construction are M.S., S.S, Aluminum depending upon process requirements

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us